- New
Heatsink with fan - for Odyssey-X86J4105 - Seeedstudio 114070141
Index: SEE-18808
- Reduced price
- Sale
- Reduced price
- Sale
- Sale
- Sale
Air quality / dust sensor PM1.0 / PM2.5 / PM10 - PMS3003 - 5 V UART
Index: DNG-13442
- Reduced price
- Sale
List of products by brand DFRobot - Strona 20
Loading...
GPS module UBX-G7020-KIT + case - DFrobot
GPS UBX-G7020-KT module has a 56-channel GPS receiver, it operates with a voltage from 3.3 V to 5 V. The update frequency is from 1 Hz to 10 Hz. Communication is via the serial...
Index: DFR-04596
Index: DFR-04596
DFRobot Gravity converter prądowo current-voltage 0-25/0,3V
Module from the Gravity series enables the processing of the current signal from 0 mA to 25 mA into a voltage signal from 0 V to 3V. The sensor may be connected to the...
Index: DFR-12471
Index: DFR-12471
DFRobot Gravity – Lightning Sensor
The module is equipped with the AMS AS3935 Franklin system and a special antenna Coilcraft MA5532-AE for determining the distance from atmospheric discharges, intensity and...
Index: DFR-13752
Index: DFR-13752
DFRobot Shield NB-IoT / LTE / GNSS / GPRS / GPS SIM7070G - Shield for Arduino - DFRobot DFR0572
An Arduino shield that allows you to send text messages and create connections in the GSM network. It also has a GPS and LTE module. It communicates via the UART serial...
Index: DFR-12362
Index: DFR-12362
DFRobot Gravity StarterKit with DFRduino Uno
Starter set introducing the world of Arduino programming. It allows for the construction of more than a dozen of projects using Arduino and i.a.: servos, LEDs, distance and...
Index: DFR-06291
Index: DFR-06291
DFRobot - 12V Solenoid Valve 1/2"
The enables the control of the liquid flow using a computer or microcontroller. The valve is supplied with the voltage of 12 V. It is closed to connect the power supply of 12...
Index: DFR-07423
Index: DFR-07423
DFRobot Gravity - analog soil humidity sensor
The device is used to measure the soil moisture by measuring the resistance, compatible with Arduino and Raspberry Pi. The supply voltage is from 3.3 V to 5 V. The sensor is...
Index: DFR-11259
Index: DFR-11259
DFRobot Beetle ESP32 v2.0 IoT - microcontroller with WiFi Bluetooth
Beetle ESP32 is a smaller version of the FireBeetle board. Board based on the ESP-WROOM-32D module with dual-core Tensilica LX6 processor with the frequency of 240 MHz. It has...
Index: DFR-13504
Index: DFR-13504
DFRobot Gravity - analog sensor of ambient light
Analog ambient light sensor PT550 compatible with Arduino and Raspberry Pi. The sensor allows to determine the light density and reflects the analog voltage signal back to...
Index: DFR-10839
Index: DFR-10839
DFRobot Gravity - CO2 carbon dioxide sensor - electrochemical
The sensor determines the concentration of CO2 (carbon dioxide) in the air. It is equipped with digital and analog output that works with voltage of 5 V. The kit includes a...
Index: DFR-04487
Index: DFR-04487
Romeo v2 ATmega32u4 - all in one controller - compatible with Arduino
DFRobot module compatible with Arduino Leonardo. In addition to the traditional features of this type of board has a connector for XBee modules, a two-channel 32V/2A motor...
Index: DFR-02688
Index: DFR-02688
Ultrasonic distance sensor URM37 v5 2-800cm with temperature correction
Ultrasonic sensor from DFRobot operating in the range from 2 cm to 800 cm. It is powered with the voltage from 3.3 V to 5,5 V. Communication is via serial interface UART (RX,...
Index: DFR-03413
Index: DFR-03413
USB BLE-Link - Bluetooth 4.0 Low Energy module
The Bluetooth BLE module with USB plug which can be connected to the computer with the operating system supporting BT 4.0. The device allows remote programming of Arduino...
Index: DFR-03176
Index: DFR-03176
Step-Down Voltage Regulator - adjustable 3,3V - 25V 5A - DFRobot DFR0205
Inverter module for converting input voltage from 3.6 V to 25 V, to output voltage from 3.3 V to 25 V. The current capacity for 5 V is 5 A. The input voltage must be higher...
Index: DFR-15090
Index: DFR-15090
DFRobot Gravity - analog soil moisture sensor - corrosion resistant - SEN0193
The device is used to measure soil moisture by the capacitive detection. It has a built-in voltage regulator which provides an operating voltage range from 3.3 V to 5 V. It is...
Index: DFR-10305
Index: DFR-10305
The module uses an electromagnetic field to transfer energy between two objects within a range of up to 10 mm. It provides voltage of 5 V and current of 1 A. The efficiency of...
Index: DFR-05495
Index: DFR-05495
Micro Metal DC Geared Motor with Lead Screw (6V 150RPM M4*55)
Small metal motor supplied with 6 volts and 55 mm long M4 threaded output shaft. The idling speed is approx. 150 rpm. Its dimensions are: 25 x 12 mm .
Index: DFR-06703
Index: DFR-06703
Water generator with 5.0 volt output at 4/min flow rate. Threads are 1/2," works with pressures up to 1.0 MPa. The maximum output current is 150 mA. Battery not included.
Index: DFR-09537
Index: DFR-09537
DFRobot Gravity - TEMT6000 analog light sensor
Analog ambient light sensor TEMT6000, compatible with Arduino. The sensor allows to determine the light density and reflects the analog voltage signal back to Arduino. The...
Index: DFR-11253
Index: DFR-11253
DFRobot Gravity - IR receiver 38kHz
The IR receiver from the Gravity series, operating at a frequency of 38 kHz with a voltage of 5 V. The module allows to receive commands from the IR transmitter. The...
Index: DFR-11267
Index: DFR-11267
Module with blue backlight, equipped with a connector Gravity is ideal for working with Arduino. The LED glows, when the pin signal switches to a low state.
Index: DFR-11269
Index: DFR-11269
Gravity - segment display 8-digital I2C - red - DFRobot DFR0646-R
The 8-digit, 8-segment Gravity series display allows you to adjust the brightness of the characters displayed, thanks to a 16-degree adjustment. The device has an I2C...
Index: DFR-16311
Index: DFR-16311
DFRobot Gravity - 2x16 I2C LCD display with RGB backlight - for Arduino
LCD display 2x16 characters with backlight in any color palette RGB. It communicates with the two-wire I2C bus. The kit includes a cable adapted to Gravity DFRobot IO Expansion...
Index: DFR-09538
Index: DFR-09538
DFRobot Gravity - digital IR transmitter
Digital IR transmitter from the Gravity, operating at a frequency of 38 kHz with a voltage of 5 V. The module communicates with an IR transmitter, after pairing the modules.
Index: DFR-11268
Index: DFR-11268