What are we best at? Electronics & 3D printing
Fast delivery 30-day returns
Own warehouse & service Thousands of products
15+ years of expertise 1.7M+ orders
What are we best at? Electronics & 3D printing
Fast delivery 30-day returns
Own warehouse & service Thousands of products
15+ years of expertise 1.7M+ orders

Over 500,000 customers already trust us. With us you get:

 

same-day shipping for products marked “24h shipping”

 

our own service centre in Poland

 

30 days to return and free delivery in Poland from PLN 500

 

4.9/5 on TrustMate and 4.9/5 on Google (almost 4,000 reviews)

 

VAT invoice, leasing and instalments for businesses

For businesses

 

individual quote for larger quantities

 

VAT invoice

For schools and universities

 

orders based on requests for quotation

 

help with choosing kits for your lab

Index: PCL-29506
EAN: 5904741320272

Gledopto GL-BS-001WL - signal booster for addressable WLED LED strips - 5/12/24/36/48V - 20A

Signal booster for digital LED strips for WLED controllers, up to 10 m after the output.

  • Strips powered with 5, 12, 24, 36 or 48 V
  • Output current up to 20 A
  • Selectable 33 Ω or 249 Ω output resistor
Price:
Net price:

This store sells to registered businesses only

Ordering on botland.store requires a verified business account with a VAT ID. Create one and we will confirm it shortly.

Your account is waiting for B2B approval

Ordering on botland.store opens once we have verified your company details. We will email you as soon as your account is approved.

Quantity

Over 500,000 customers already trust us. With us you get:

 

same-day shipping for products marked “24h shipping”

 

our own service centre in Poland

 

30 days to return and free delivery in Poland from PLN 500

 

4.9/5 on TrustMate and 4.9/5 on Google (almost 4,000 reviews)

 

VAT invoice, leasing and instalments for businesses

For businesses

 

individual quote for larger quantities

 

VAT invoice

For schools and universities

 

orders based on requests for quotation

 

help with choosing kits for your lab

Stable data signal over a long cable

Gledopto GL-BS-001WL is a signal amplifier installed between a WLED controller and a digital LED strip to correct data signal distortion on a long cable. As a result, the strip does not flicker or change colors on its own, and the cable from the amplifier output to the strip can be up to 10 m long.

The amplifier works with strips powered by 5, 12, 24, 36 or 48 V and carries a current of up to 20 A. It does not change the voltage, so for longer runs you can connect an additional power supply matched to the strip.

Wzmacniacz sygnału Gledopto GL-BS-001WL do cyfrowych taśm LED

GL-BS-001WL amplifier with the INPUT and OUTPUT terminal covers

5-48 V

strip voltage: 5, 12, 24, 36 or 48 V

20 A

maximum output current

10 m

max. cable length from the output to the strip

33 Ω / 249 Ω

selectable output resistors

Gledopto GL-BS-001WL - signal booster for addressable WLED LED strips - 5/12/24/36/48V - 20A

Print on the housing describing the INPUT and OUTPUT terminals

Connection between the controller and the strip

Connect the WLED controller to the INPUT side of the amplifier and the strip to the OUTPUT side. Each side has V+, DATA and GND terminals. Do not swap the input and the output, as this may damage the amplifier.

On the output you choose a resistor. The manufacturer recommends 33 Ω when the strip's power, data and ground run in one cable, and 249 Ω when you route them in separate wires.

Screw terminals under the covers

You open the covers on both sides of the housing with a flat screwdriver, and under them are the screw terminals. The manufacturer recommends wires with a cross-section from 1 mm² to 4 mm², stripped for a length from 6 mm to 7 mm. For high current, stranded wire works better than solid wire.

Gledopto GL-BS-001WL - signal booster for addressable WLED LED strips - 5/12/24/36/48V - 20A

Open cover on one side and three screw terminals

Is it the right choice for you?

A good choice if:

  • Your WLED controller is far from the start of the digital LED strip
  • The strip flickers or changes colors on its own over a long cable
  • You have a digital strip powered with 5, 12, 24, 36 or 48 V

Consider another option if:

  • You have a strip without a data wire: the amplifier only corrects the signal of digital LED strips

Fun fact

One resistor for a single cable, the other for separate wires

At the output you choose a 33 Ω or 249 Ω resistor. The manufacturer recommends 33 Ω when power, data and ground run in one cable, and 249 Ω when you route them as separate wires.

Source: Gledopto: GL-BS-001WL manual

Frequently asked questions

Where do I connect the signal amplifier?

Between the WLED controller and the LED strip: connect the controller to the INPUT and the strip to the OUTPUT.

Does the amplifier change the LED strip voltage?

No. The booster only corrects the data signal, and you match the power supply to the strip's voltage and current.

What wires do I connect to the amplifier terminals?

The manufacturer recommends wires with a cross-section from 1 mm² to 4 mm², and for high current stranded wire instead of solid wire.

Technical specification

ParameterValue
ManufacturerGledopto
Manufacturer codeGL-BS-001WL
Typesignal booster for digital LED strips
Operating voltage5 V, 12 V, 24 V, 36 V or 48 V
Output currentmax. 20 A
Length after the OUTPUTmax. 10 m
Output resistor33 Ω or 249 Ω
TerminalsV+, DATA, GND on input and output
Wires1-4 mm² (17-11 AWG), strip length 6-7 mm
Enclosureflame-retardant polycarbonate
Operating temperature-20 °C to 45 °C
Dimensions115 x 35 x 24 mm
Weight50 g
Name Value
Voltage to 5.0 V
Voltage from 48.0 V
Smart Home Signal amplifier
Width 12 cm
Height 3.8 cm
Depth 2.8 cm
Weight 0.058 kg

Delivery method Delivery time Cost
GLS Shipping in 24 hours from €8.07

The full delivery terms are on the page Delivery and payment.

30 days to return, without giving a reason

If the product does not meet your expectations, you have 30 days from receiving the parcel to withdraw from the contract. The product only has to be complete. The right of return belongs to consumers (a purchase unrelated to business activity).

Complaints

If the product turns out to be faulty, you can make a claim under the guarantee or the statutory warranty. We handle claims without delay, at the latest within 14 working days of receiving the report together with the goods.

Be the first to ask a question about this product!

Instructions and documents

GPSR data

Country of origin China
Manufacturer contact details Gledopto Co., Ltd., Shenzhen, Chiny
EU market introducer contact details Pcblab Aneta Kopeć-Dziura, 252B lok. 3, 33-150 Wola Rzędzińska

Product information

This product is a component intended for further assembly or prototyping. It is not a finished product within the meaning of the product safety regulations.

Other customers also viewed

There are no reviews for this product yet.