
- New
Over 500,000 customers already trust us. With us you get:
same-day shipping for products marked “24h shipping”
our own service centre in Poland
30 days to return and free delivery in Poland from PLN 500
4.9/5 on TrustMate and 4.9/5 on Google (almost 4,000 reviews)
VAT invoice, leasing and instalments for businesses
For businesses
individual quote for larger quantities
VAT invoice
For schools and universities
orders based on requests for quotation
help with choosing kits for your lab
ToughC5 - waterproof IoT controller with 2'' touchscreen - ESP32-C5 - M5Stack K162
M5Stack ToughC5 is a sealed IoT controller with ESP32-C5 and a 2-inch touch screen for outdoor use.
- Wi-Fi 6 on the 2.4 GHz and 5 GHz bands, BLE 5 and a Zigbee and Thread radio
- 4 HY2.0 connectors (RS485 with 6 V to 24 V power, I2C, GPIO, UART), microSD and an RTC clock
- USB-C cable and keys included; the 3.7 V battery is sold separately
We could not load the price.
The promotional price does not combine with quantity discounts.
A touchscreen controller that stays outdoors
M5Stack ToughC5 is a sealed IoT controller built around the ESP32-C5HR8 module. It has a single-core 240 MHz RISC-V processor, 16 MB of Flash and 8 MB of PSRAM. The front carries a colour 2-inch IPS screen (320 x 240 px) with a brightness of up to 853 nits and a capacitive touch panel. The PC and ABS housing with a UV anti-ageing additive, an O-ring seal and M12 cable glands is designed for outdoor use. It offers standard water and dust resistance with no stated IP rating, so do not submerge the controller.
Connectivity includes Wi-Fi 6 on the 2.4 GHz and 5 GHz bands, Bluetooth 5 (BLE) and an IEEE 802.15.4 radio for Zigbee and Thread. Inside you will find 4 HY2.0 connectors (RS485, I2C, GPIO, UART), a microSD slot, an RTC clock with its own battery and a buzzer. You can power it from USB-C, from a 6 V to 24 V line at the RS485 port or from a 3.7 V battery, and the M5PM1 power management chip supports wake-up from a low-power state.

ToughC5 with a USB-C cable: a 2-inch touchscreen in a sealed enclosure
2.4 and 5 GHz
dual-band Wi‑Fi 6, plus BLE 5 and IEEE 802.15.4
853 nits
brightness of the 2-inch 320 x 240 px IPS touchscreen
6 V to 24 V
power from the line at the RS485 port, plus USB-C and a 3.7 V battery
10.41 µA
current draw when powered off at 4.2 V
What sets this model apart
Wi‑Fi 6, Zigbee and Thread in a sealed enclosure with a touchscreen
In the manufacturer's comparison table, the older M5Stack Tough has only 2.4 GHz Wi-Fi. In the ToughC5, the ESP32-C5HR8 module adds the 5 GHz band, Bluetooth 5 and an 802.15.4 radio, so a single controller also gives you a radio for Zigbee and Thread networks. Power is managed by the M5PM1 and M5IOE1 chips instead of the AXP192, and the RX8130CE clock keeps time from a CR2032 battery.
3 radios
Wi‑Fi 6 (2.4 and 5 GHz), BLE 5 and IEEE 802.15.4 in one module
16 MB + 8 MB
Flash memory and PSRAM memory
4 HY2.0 ports
RS485, I2C, GPIO and UART on the board inside the enclosure

Back of the enclosure: a flange with mounting holes and an M12 cable gland
Enclosure, mounting and cable glands
The housing flange has mounting holes, and the set includes two hex keys: 2.5 mm for M3 screws and 1.5 mm for M2 screws. The manufacturer also lists magnetic mounting. Two M12 cable glands on both sides of the housing route the USB-C cable and sensor cables inside, and the cover is sealed by the O-ring included in the set. A label on the housing shows how to tighten the cover: leave a 1 mm gap between the cover and the body - the label marks a gap smaller than 0.8 mm as an error.
The whole unit measures 75.9 x 58.0 x 42.5 mm and weighs 119 g. The power button works simply: one click turns the controller on or restarts it, and two clicks turn it off.
ESP32-C5: Wi‑Fi 6, BLE 5 and 802.15.4 radio
The ESP32-C5HR8 module connects on the 2.4 GHz and 5 GHz bands using the Wi-Fi 6 standard. It also has Bluetooth 5 (BLE) and an IEEE 802.15.4 radio for Zigbee and Thread in the same module. The 14.3 x 5.3 mm FPC antenna is connected to a second-generation IPEX connector on a 50 mm cable.
You can save measurements to a card in the microSD slot, and the RX8130CE RTC clock has its own power from a CR2032 battery (3 V, 220 mAh). A passive buzzer provides audio signalling.

ToughC5 from the back: the USB-C cable enters through the M12 cable gland

Internal expansion board with four HY2.0 connectors and the M5-Bus connector
HY2.0 ports, RS485 and M5-Bus connector
The internal expansion board has 4 HY2.0-4P connectors and an M5-Bus connector. You route sensor cables out through the M12 glands, and the set includes cables with 1.25-2P and 1.25-4P plugs.
- Port A: I2C (G2 SDA, G3 SCL) - Unit sensors, e.g. ENV Pro Unit or up to 6 I2C devices via the PaHub multiplexer
- Port B: GPIO (G6, G1)
- Port C: UART (G12, G11)
- RS485 port: lines A and B, SP485EEN-L/TR converter, 6 V to 24 V DC power input
- M5-Bus: ADC (G0, G1), DAC (G4, G6), SPI (G7, G8, G9), UART, I2C, GPIO and 3.3 V, 5 V and BAT lines
Power and programming
The controller has three power sources, and power is managed by the M5PM1 and M5IOE1 chips with wake-up from a low-power state. When switched off, ToughC5 draws 10.41 µA at 4.2 V, and 320 mA at full load.
- USB-C: 5 V, 500 mA - also for programming
- RS485 port: 6 V to 24 V DC, up to 1 A
- 3.7 V battery (MX1.25-2P connector, sold separately): charging at 180 mA, 650 mA after switching in the program
- Programming: UiFlow2 with graphical block programming, Arduino IDE with the M5Unified and M5GFX libraries, and PlatformIO

Inside the ToughC5: the RTC clock's CR2032 battery and the internal connectors
A closer look at the ToughC5

Botland is an official distributor of the M5Stack module family in Poland. We have extended this system of stackable functional devices with accessories from our range and numerous blog guides. All M5Stack products presented here are original.

The controller mounted by a garden sprinkler: the screen shows temperature and humidity
2-inch touch screen with 853 nits brightness
The 320 x 240 px ILI9342C IPS panel shines with a brightness of up to 853 nits according to the manufacturer's specification. Capacitive touch is handled by the CHSC6540 controller on the I2C bus, and the M5IOE1 chip controls the screen backlight. The M5GFX library drives the screen in the Arduino IDE.
Expand the ToughC5 with sensors and modules


PaHub multiplexer

Isolated RS485 Unit
Is it the right choice for you?
A good choice if:
- You mount the controller outdoors and need a bright touch screen
- You connect devices over RS485 and want to power the controller from the same line
- You need Wi-Fi 6 and an IEEE 802.15.4 radio for Zigbee or Thread in a single device
- You plan to run from a battery with wake-up from a low-power state
Consider another option if:
- You need speaker sound and two cores: choose the M5Stack Tough
- You prefer a controller with buttons and a 1.14-inch screen for industrial use: check M5Stack Station RS485
ToughC5 and Tough: what has changed
| ToughC5 (K162) | Tough | |
|---|---|---|
| Module | ESP32-C5HR8, RISC-V, 1 core, 240 MHz | ESP32-D0WDQ6-V3, Xtensa LX6, 2 cores, 240 MHz |
| Connectivity | Wi‑Fi 6 2.4 and 5 GHz, BLE 5, IEEE 802.15.4 | Wi‑Fi 2.4 GHz |
| Memory | 16 MB Flash, 8 MB PSRAM, 384 kB SRAM | 16 MB Flash, 8 MB PSRAM, 520 kB SRAM |
| Antenna | FPC 14.3 x 5.3 mm on IPEX | 3D Wi‑Fi antenna |
| Sound | passive buzzer | 1 W speaker with NS4168 amplifier |
| Power management | M5PM1 + M5IOE1 expander | AXP192 |
| RTC clock | RX8130CE | BM8563 |
| Screen and touch | IPS 2 inch 320 x 240 px, CHSC6540 | IPS 2 inch 320 x 240 px, CHSC6540 |
| See | this page | Tough |
Data from the manufacturer's comparison table (docs.m5stack.com, K162).
Fun fact
1 mm gap on the housing label
On the ToughC5 housing the manufacturer placed a label with the slogan "KEEP THE GAP": a gap of 1 mm between the cover and the body is marked as correct, and one smaller than 0.8 mm as an error. When screwing the housing together, pay attention to the gap.
Frequently asked questions
Is the ToughC5 suitable for outdoor use?
Yes, the manufacturer describes the ToughC5 as a waterproof IoT controller for outdoor use. However, do not submerge the device, because the manufacturer does not state an IP rating.
Is a battery included with the ToughC5?
No, the box contains only a USB-C cable. You buy a 3.7 V battery separately and plug it into the MX1.25-2P connector.
Does the ToughC5 have an RS485 port with a power input?
Yes, it has an RS485 port with an SP485EEN-L/TR converter on lines G23 and G24. Through the same port you can power the controller with 6 V to 24 V DC.
Does the ToughC5 have a radio for Zigbee and Thread?
Yes, the ESP32-C5HR8 module has an IEEE 802.15.4 radio for Zigbee and Thread, alongside Wi-Fi 6 on the 2.4 GHz and 5 GHz bands and BLE 5.
How do I route sensor cables out of the enclosure?
Through the two M12 glands on the sides of the enclosure. The HY2.0 connectors are on the board inside, so you pass the sensor cable through the gland and plug it in inside.
What environment can I use to program the ToughC5?
In UiFlow2 you build the program from blocks. In the Arduino IDE you use the M5Unified and M5GFX libraries. The third option is PlatformIO with the pioarduino platform.
Package contents
- 1 x ToughC5 controller
- 1 x USB-C cable, 1 m
- 1 x L-shaped hex key 2.5 mm (for M3 screws)
- 1 x L-shaped hex key 1.5 mm (for M2 screws)
- 1 x Cable with a 1.25-2P plug (one end)
- 1 x Cable with a 1.25-4P plug (one end)
- 1 x O-ring seal
A battery, a microSD card and sensors are not included.
Specification
| Parameter | Value |
|---|---|
| Manufacturer | M5Stack |
| Manufacturer code | K162 |
| Type | IoT controller in a sealed enclosure with a touchscreen |
| Module | ESP32-C5HR8, RISC-V 32-bit, 1 core, up to 240 MHz |
| Flash memory | 16 MB |
| PSRAM memory | 8 MB |
| Wireless connectivity | Wi-Fi 6 (2.4 and 5 GHz), Bluetooth 5 (BLE), IEEE 802.15.4 (Zigbee, Thread) |
| Antenna | FPC 14.3 x 5.3 mm, 2.4 and 5 GHz, 2nd-generation IPEX connector, 50 mm cable |
| Screen | IPS 2 inch, 320 x 240 px, ILI9342C driver, brightness up to 853 nits |
| Touch | capacitive, CHSC6540 controller |
| Connectors | USB-C x1, HY2.0-4P x4 (RS485, I2C, GPIO, UART), M5-Bus, microSD slot, MX1.25-2P battery connector |
| RS485 converter | SP485EEN-L/TR |
| Power | USB 5 V / 500 mA; RS485 port 6 V to 24 V DC / 1 A; 3.7 V battery |
| Power management | M5PM1 + M5IOE1; charging 180 mA (default) or 650 mA |
| Current draw | off: 10.41 µA at 4.2 V; full load: 320 mA at 4.2 V |
| RTC clock | RX8130CE, CR2032 battery 3 V / 220 mAh |
| Signaling | passive buzzer |
| Enclosure | PC + ABS with UV additive, O-ring seal, 2 M12 glands, flange with mounting holes, magnetic mounting |
| Resistance | standard water and dust resistance (not for submersion); the manufacturer does not state an IP rating |
| Software | UiFlow2, Arduino IDE, PlatformIO |
| Dimensions | 75.9 x 58.0 x 42.5 mm |
| Weight | 119 g |
Useful links
Technical data according to the manufacturer (docs.m5stack.com, K162), as of November 2026. Parameters may change with a new revision of the device.
| Name | Value |
|---|---|
| UC - Microcontroller | ESP32-C5HR8 |
| UC - Core | 32-bit RISC-V |
| UC - Flash | 16 MB |
| UC - RAM | 8 MB |
| UC - core | 1. Single Core |
| UC - freq | 240 MHz |
| UC - WiFi | yes |
| UC - USB | USB C |
| UC - microSD | yes |
| UC - Bluetooth | yes |
| UC - I2C | yes |
| UC - UART | yes |
| UC - Connector | USB typ C |
| Width | 10.1 cm |
| Height | 4.6 cm |
| Depth | 8.3 cm |
| Weight | 0.161 kg |
The full delivery terms are on the page Delivery and payment.
30 days to return, without giving a reason
If the product does not meet your expectations, you have 30 days from receiving the parcel to withdraw from the contract. The product only has to be complete. The right of return belongs to consumers (a purchase unrelated to business activity).
Complaints
If the product turns out to be faulty, you can make a claim under the guarantee or the statutory warranty. We handle claims without delay, at the latest within 14 working days of receiving the report together with the goods.
Be the first to ask a question about this product!
Instructions and documents
GPSR data
There are no reviews for this product yet.
Products from the same category
See all ›
ToughC5 - waterproof IoT controller with 2'' touchscreen - ESP32-C5 - M5Stack K162
Ask about the product
Have a question about this product? Send us a message and we will get back to you.
We usually reply within one business day. The answer is sent to the e-mail address you provide.

