- New
Product description: Filament Rosa3D Refill PLA Starter 1.75 mm 1 kg - Rose Beige Skin
Filament Refill made of biodegradable biopolymer in flesh color . The PLA Starter line was prepared with beginners in mind 3D printers. The material is characterized by great ease of printing while maintaining high detail of formed 3D models. PLA Starter shows low shrinkage and good adhesion of the first layers of printing. During melting does not emit an unpleasant odor. The diameter of the filament is 1.75 mm and the weight of the material is 1 kg .
In our range of filaments you will also find other materials and colours.
Filaments used in 3D printing .
Additional information about PLA
- The perfect choice for beginners
- An environmentally safe product, made of biodegradable biopolymer
- Good adhesion between layers
- High accuracy and detail of the printed part
| Head temperature | From 190°C to 225°C |
| Table temperature | From 40°C to 60°C |
| Print cooling | From 70% to 100% |
| Recommended print speed | From 60mm/s to 80mm/s |
Due to differences in printer designs, the above data should be treated as guidelines and the appropriate values should be determined experimentally. |
Rosa3D Refill PLA Starter filament 1.75 mm 1 kg - Rose Beige Skin.
Technical specification of PLA Starter filament
| Parameter | Range |
|---|---|
| Filament dimensional tolerance | +/- 0.05mm |
| Oval dimensional tolerance | +/- 0.02mm |
| Heat distortion temperature | 55°C (ASTM E2092) |
| Density | 1.24 g/ cm3 |
| Tensile elongation | 6% (ASTM D882) |
| Tensile strength (break) | 53 MPa (ASTM D882) |
| Elastic modulus | 3500 MPa (ASTM D882) |
| Smell | odorless |
| Filament type | PLA |
| Color | Rose Beige Skin |
| Diameter | 99mm |
| Width | 57mm |
| Mounting hole diameter | 94mm |
| Vacuum packaging | Yes |
| Moisture absorber | Yes |
| Product weight | 1 kg net |
