Non-contact voltage tester Uni-T UT12D-EU

Index: LEC-19081 EAN: 5901890057097
A device that allows you to safely detect voltage. These types of indicators are commonly used in work related to repair or maintenance of cables, sockets and other electrical and electronic equipment. The meter allows for the detection of alternating voltage in the range of 24 V to 1000 V. The tester is able to detect voltage in wires running under the plaster. This is a very useful function during renovation work, when we have to drill a hole in the wall where there may be such wires.
Non-contact voltage tester Uni-T UT12D-EU
€6.49
€5.28 tax excl.
Available
Check quantity
Shipping in 24 hours
30-day returns
PayPal payment
Manufacturer: UNI-T

Product description: Uni-T UT12D-EU non-contact voltage tester

A device that allows you tosafelydetect voltage. These types of indicators are commonly used in work related to repair or maintenance of cables, sockets and other electrical and electronic equipment. The meter allows the detection of AC voltage in the rangefrom 24 V to 1000 V. The tester is able to detect voltage in wires running under the plaster. This is a veryuseful functionduring repair work, when we have to drill a hole in the wall where there may be such wires. The detection of voltage is indicated by a built-inbuzzerand flashingLEDs.

Tester Uni-T UT12D-EU

Uni-T UT12D-EU tester.

Miejsce na baterie zabezpieczone zostało zaślepką w kolorze szarym.

The battery compartment is protected by a grey cap.

Key product features

The meter can work in two modes. The first is a low-voltage mode, which is used for measurements of devices such as low-voltage motors (below 90 V), audio systems, arc welders, mining lighting and cables with a thick insulation layer. The second is a high voltage mode, which is used for measurements of, among others, three-phase systems (from 90 V to 1000 V), electrical panels, power distribution units or electrical equipment working with high voltage. The unit is powered by twoAAA batteriesand is equipped with an auto-off function. A bonus feature of theUT12D-EUis its flash lamp, which allows measurements to be taken freely in low-light conditions. Thanks to its robust housing the unit is resistant to damage caused by falls from a height of approximately1m.

Technical specification

  • AC voltage - low range: from 24 V to 1000 V
  • AC voltage - high range: from 24 V to 1000 V
  • Frequency range: from 50 Hz to 60 Hz
  • Low supply voltage indication: below 2.4 V
  • Power supply: 2 x AAA 1.5 V batteries (included)
  • Dimensions: 150 mm x 19 mm x 23 mm
  • Weight: 50 g
Urządzenie zasilane jest przy użyciu dwóch baterii AAA.

The device is powered by two AAA batteries.

Meter - DC voltage no
Meter - Diode tester no
Meter - Battery tester no
Meter - Frequency no
Meter - AC voltage yes
Meter - AC current no
Meter - Capacitance no
Meter - Auto Range no
Meter - DC current no
Meter - Resistance no
Meter - Transistor tester no
Meter - sound no
Meter - Inductance no
Meter - Backlight yes
Meter - Temperature no
Meter - Data Hold no

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

Customers who bought this product also bought:

Raspberry Pi 4 model B WiFi Dual Band Bluetooth 4GB RAM 1.5GHz

Raspberry Pi   4 model B  with 4 GB   RAM . The model is equipped with two microHDMI ports, two  USB 3.0 ports and 2 USB 2.0 ports as well as a  USB-C  power supply...
Index: RPI-14647
Index: RPI-14647
Limited availability
Regular price €73.56 Price €73.56

MicroHDMI - HDMI adapter - Akyga AK-AD-10

Adapter to connect the HDMI cable for devices equipped with a microHDMI slot, for example, Raspberry Pi 4B minicomputer. It has gilded tips and high precision of making. It...
Index: RCO-14753
Index: RCO-14753
In stock, shipping 24 hours!
Check quantity
Regular price €1.28 Price €1.28

ESP32 Starter Kit with ESP32 WiFi module

A kit consisting of modules and sensors to get you started and learn how the ESP32 module works. The set includes a module based on ESP-WROOM-32 chip which is equipped with...
Index: ZES-19291
Index: ZES-19291
Available
Check quantity
Regular price €32.53 Price €32.53

ESP32 WiFi + BT 4.2 - platform with module ESP-WROOM-32 compatible with ESP32-DevKit

Tile ESP32-DevKitC with a built-in module ESP-WROOM-32. The module has leads in the form of goldpins, pitch 2.54 mm. The system from the family ESP32 for communication in a...
Index: MOD-08893
Index: MOD-08893
Delivery scheduled for 2022-07-29
Regular price €9.70 Price €9.70

Solder wick for tin 2 mm

Solder wick for removing tin excess. Width 2 mm, length 1.5 m.
Index: NSZ-00172
Index: NSZ-00172
In stock, shipping 24 hours!
Check quantity
Regular price €1.28 Price €1.28

Bracket on a jib with magnifying glass and LED backlight - third hand ZD-10Y

Bracket with a magnifying glass, grippers, spring for the soldering iron, cleaner and sponge for cleaning the tips, place for resin and LED backlight.
Index: LUT-04163
Index: LUT-04163
In stock, shipping 24 hours!
Check quantity
Regular price €30.16 Price €30.16

Tin suction extractor Lextool - gray

A device for removing tin excess. It has a case diameter of 25 mm, the total length is 200 mm.
Index: LUT-02458
Index: LUT-02458
In stock, shipping 24 hours!
Check quantity
Regular price €2.58 Price €2.58

Step-Down Voltage Regulator D24V3F5 - 5V 0,3A - Pololu 2098

Step-down converter with 5 V output voltage. Maximum current up to 300 mA. Supply voltage in the range of 6 V - 42 V.
Index: PLL-01331
Index: PLL-01331
Available, 24h shipping!
Check quantity
Regular price €23.65 Price €23.65

Step-Down Voltage Regulator D24V6F3 - 3,3V 0,6A - Pololu 2106

Step-down converter with 3.3 V output voltage. Maximum current up to 600 mA. Supply voltage in the range 3.8 V - 42 V.
Index: PLL-01332
Index: PLL-01332
Available, 24h shipping!
Check quantity
Regular price €14.08 Price €14.08

Microphone 50-56dB 9/4,5mm - THT - 10 pcs.

Height h: 4.5 mm. Diameter Ø: 9 mm. Sensitivity: 50-56 dB. Pins for soldering to  the printed circuit board.
Index: UCC-00740
Index: UCC-00740
In stock, shipping 24 hours!
Check quantity
Regular price €1.45 Price €1.45

Power supply for LED strips - 12V / 2,1A / 25W

Stabilized, impulse, industrial power supply for LED strip. Supply voltage: 180 V to 260 V. Output voltage: 12 V DC. Output current: 2,1 A. Equipped with a terminal strip.
Index: ZAS-09644
Index: ZAS-09644
Available, 24 hours shipping!
Check quantity
Regular price €4.32 Price €4.32

Electrolytic capacitor 220uF/25V 8x12mm 105C THT - 10pcs

220 uF/ 25V through-hole electrolytic capacitor. Leads raster: 3.5 mm. Size: Ø8x12 mm. Price for 10 pieces.
Index: PAS-00857
Index: PAS-00857
Available, 24 hours shipping!
Check quantity
Regular price €0.41 Price €0.41

Products from the same category

Battery charge level and sound level indicator - KA2284

The module is based on the KA2284 system. It is used to measure the input signal with the 5 LEDs, which are gradually included depending on the value of the measured voltage....
Index: MOD-07150
Index: MOD-07150
Delivery scheduled for 2022-07-29
Regular price €2.06 Price €2.06

USB tester Keweisi KWS-1802C current and voltage meter from USB C port - white

USB meter in white, designed for testing USB type C sockets . It is equipped with a small but clear LCD screen , which displays voltage, current, capacity, operating time,...
Index: DNG-17512
Index: DNG-17512
Available, 24h shipping!
Check quantity
Regular price €9.53 Price €9.53

Charger Doctor - current and voltage meter USB

The device measures current and voltage from the USB slot of the computer or power supply / charger. It has a male plug type A and female socket to connect any device -...
Index: ZAS-04087
Index: ZAS-04087
In stock, shipping 24 hours!
Check quantity
Regular price €2.37 Price €2.37

Voltmeter KWS-AC300 with split-core current transfer - 50-30V/100A

The KWS-AC300 is a closed-core AC transformer that allows you to measure current parameters. A small LCD display shows data indicating voltage and current, temperature,...
Index: DNG-17859
Index: DNG-17859
Available, 24h shipping!
Check quantity
Regular price €19.96 Price €19.96

USB multimeter KWS-V21 Charger Detector

Small size USB meter designed for testing USB 2.0 sockets . Very easy to use. It is equipped with a clear LCD screen, which displays voltage, current, capacity and...
Index: DNG-17513
Index: DNG-17513
Available, 24h shipping!
Check quantity
Regular price €7.49 Price €7.49

Voltage Detector Fazer 777 230V

Single-pole indicator for non-contact detection of AC voltage in installations from 220 V to 380 V.
Index: GTK-14790
Index: GTK-14790
Available, 24h shipping!
Check quantity
Regular price €8.66 Price €8.66

Analog ammeter - panel 91C16 mini - 20A

Analog ammeter capable of measuring current in the range up to 20 A. It has a square case in size 40 x 40 mm. The accuracy CLASS 1.5.
Index: PRO-10210
Index: PRO-10210
In stock, shipping 24 hours!
Check quantity
Regular price €1.78 Price €1.78

Analog ammeter - panel 91C16 mini - 30A

Analog ammeter capable of measuring current up to 30 A . It has a square housing with dimensions of 40 x 40 mm. Its accuracy is CLASS 1.5.
Index: PRO-10211
Index: PRO-10211
Available, 24 hours shipping!
Check quantity
Regular price €1.28 Price €1.28

Non-contact voltage tester Voltcraft MS-100

A small size tester manufactured by Voltcraft. It enables direct and indirect measurement of DC voltage up to 12 V and AC voltage up to 250 V . The values of the measured...
Index: CNR-19349
Index: CNR-19349
Available
Check quantity
Regular price €8.14 Price €8.14

Analog ammeter - 15A

Analog ammeter capable of measuring current in the range up to 15 A. It has a square case in size 47 x 47 mm.
Index: PRO-10202
Index: PRO-10202
In stock, shipping 24 hours!
Check quantity
Regular price €2.59 Price €2.59

Analog ammeter - panel DH-80 - 100A

Analog ammeter capable of measuring current in the range up to 100 A. It has a square case in size 80 x 80 mm. The accuracy CLASS 1.5.
Index: PRO-10204
Index: PRO-10204
In stock, shipping 24 hours!
Check quantity
Regular price €4.12 Price €4.12

DFRobot Gravity - I2C battery charge level meter

A module designed for reading the Li-Pol 3.7 V battery charge level in real-time. It is also equipped with alarm function when the battery level is low, or when battery power...
Index: DFR-12263
Index: DFR-12263
In stock, shipping 24 hours!
Check quantity
Regular price €10.83 Price €10.83