Arduino - Strona 23
Grove - HP206C Pressure sensor I2C
High quality Grove pressure sensor, equipped with HP206C. It has a wide measuring range from 300 hPa to 1200 hPa. It is fully compatible with Arduino, it is connected to it via...- Discontinued product
Wio Terminal - LoRaWAN LoRa-E5, 868MHz GNSS with antenna - Seeedstudio 114992728
Wio Terminal extension module for communication in LoRaWAN LoRa-E5 standard and GNSS at frequency 868 for EU and 915 for US . It is also equipped with SMA antenna .- Discontinued product
SparkFun IoT RedBoard - ESP32 - Arduino compatible development board - SparkFun WRL-19177
SparkFun IoT RedBoard development board, compatible with Arduino. It is equipped with the ESP32 chip with a dual-core 32-bit Xtensa LX6 microprocessor clocked up to 240...- Discontinued product
Grove - GrovePi+ v3.0 Shield for RaspberryPi 4/3/2/B/B+/A+
Shield for Raspberry Pi is equipped with a w15 4-pin connectors for connecting sensors from the Grove minicomputer series. It cooperates with more than a hundred modules.Teensy 4.1 - non-Ethernet version - ARM Cortex M7 - Arduino compatible - SparkFun DEV-20359
Teensy 4.1 - compact board manufactured by SparkFun. Equipped with a dual-core ARM Cortex-M7 processor clocked at 600 MHz with the NXP iMXRT1062 chip . It has four...Grove - Lightning Sensor - AS3935 - Seeedstudio 101021072
The Grove AS3935 sensor is an advanced, easy-to-use sensor that can detect both cloud-to-ground and intra-cloud lightning , up to a 40 km radius. It communicates via the...A-Star 32U4 Mini LV - Atmega32u4 module - Pololu 3103
The module is equipped with AVR Atmega32u4 microcontroller with installed bootloader compatible with the environment of Arduino. It is equipped with 26 digital inputs/outputs,...A-Star 32U4 Mini ULV - Atmega32u4 module - Pololu 3102
The module is equipped with a Atmega32u4 microcontroller installed bootloaderem compatible with Arduino. Equipped with 26 digital inputs/outputs, as well as popular...A4990 2-channel motor driver 32V/0,65 A - Shield for Arduino - Pololu 2512
Module with two-channel A4990 circuit working with voltages from 6 V to 32 V and current up to 0.65 A per channel (max. 0.9 A). The chip can be connected directly to the...Zumo - minisumo robot for Arduino v1.2 - assemled - Pololu 2510
Polol's fighting educational robot. It is a fully assembled version with micro 75:1 HP motors and line sensors. To start the fun just plug in the Arduino - Uno or Leonardo...Power supply MW Power 12V/5A - plug DC 5,5/2,1mm
Stabilized mains power supply. Supply voltage: 100 V to 240 V. Output voltage: 12 VDC. Output current: 5 A.MIDI KIT - Shield dla Arduino - SparkFun DEV-12898
Module to connect the Arduino via MIDI Protocol. This interface is used to exchange information with synthesizers, sequencers and other popular music devices.- Discontinued product
DFRobot Gravity: Analog 20A Current Sensor
Current sensor operating in the range up to 20 A and up to 311 Volts on the basis of the Hall effect. The output is an analog voltage. The supply voltage is 5 V.G2 Dual High-Power 18v18 - 2-channel motor driver 30V/18A - Shield for Arduino - Pololu 2515
Shield with dualchannel driver of motors operating with voltages from 6.5 V up to 30 V and current up to 18 A per channel (max. 50 A). The system can be connected directly...G2 Dual High-Power 24v14 - 2-channel motor driver 40V/14A - Shield for Arduino - Pololu 2516
Shield with dualchannel driver of motors operating with voltages from 6.5 V up to 40 V and current up to 14 A per channel (max. 40 A). The system can be connected directly with...G2 Dual High-Power 18v22 - 2-channel motor driver 30V/20A - Shield for Arduino - Pololu 2517
Shield with dualchannel driver of motors operating with voltages from 6.5 V up to 30 V and current up to 22 A per channel (max. 60 A). The system can be connected directly with...G2 Dual High-Power 24v18 - 2-channel motor driver 40V/18A - Shield for Arduino - Pololu 2518
Overlay with two-channel motor driver working with voltages from 6,5 V to 40 V and current up to 18 A per channel (max. 50 A). The chip can be connected directly to...Grove - Collision Sensor - collision and vibration sensor
Collision sensor from Grove. It detect collision and vibration. It has an additional external circuit, to reduce the effect of ambient noise. The module is supplied with the...MAX14870 - 2-channel motor driver 28V/1,7 A - Shield for Arduino - Pololu 2519
Modul with dual-channel driver of motors MAX14870 working with voltages from 4.5 V to 36 V and current up to 1.7 A per channel (max 2.5 A). The system can be directly connected...Grove - module with Bluetooth 3.0 with EDR
Module from the Grove series, allowing to connect via Blootooth v3.0 + EDR, class 2. It works with a voltage of 5 V, it communicates through the Grove standard slot, it...Velleman VMA209 sensors LM35 + DS18B20 - multifunctional shield for Arduino
Shield for Arduino with 7 segment LED display 4 digits, 4 SMD LEDs, 3 independent buttons, buzzer, interfaces for sensors LM35 and DS18B20, interface IR receiver,...- Reduced price
- SPECIAL OFFERS
Dobot Arduino Al suite - set for learning about artificial intelligence with DFRduino Mega2560 board
A set consisting of elements for learning the basics of artificial intelligence. The set includes: DFRduino Mega2560 V3, Pixy CUMcam5 camera, digital buttons, LED modules,...- Discontinued product
