SENSORS - Strona 42
Sharp GP2Y0A60SZLF - analog distance sensor 10-150 cm 3V - Pololu 2476
Analog distance sensor (rangefinder) Sharp GP2Y0A41SK0F with PCB Pololu stand. It detects objects in the range from 10 to 150 cm. This version works with a voltage of 3 V.38kHz IR Proximity Sensor, Fixed Gain, Low Brightness - Pololu 2579
Proximity sensor, operating in the infrared range. It has a permanent amplification. This version of high brightness, consumes around 16 mA when powered at 5 V. The sensor...Trim with QTR-3A reflective sensors - analog - Pololu 2456
Compact bar with three reflective sensors with the size of 32 x 8 mm. It has analog outputs, it is powered with the voltage of 5 V.Grove - StarterKit v3 - IoT starter package for Arduino
Starter set introducing the world of IoT (Internet of Things) for Arduino boards. The set includes i.a.: sensors of light, touch, temperature, servo, display and many others....Optical encoder set for Pololu micro motors - version 3,3V - 2 pcs - Pololu 2591
A pair of optical quadrature sensors, designed for installation in micro motors from Pololu. It consists of a board with the sensor and the plastic impeller kit, it allows you...Arduino MKR Connector Carrier ASX00007 - shield for Arduino MKR
Module for Arduino from the MKR that extends the capabilities of I/O pins. It is designed for modules and sensors from the Grove series. It has 4-pin connectors, works with...DFRobot Gravity - 2x16 I2C LCD display - green
LCD display 2x16 characters with backlight in green. Communicates with two-wire I2C bus. The kit includes a cable adapted to Gravity DFRobot IO Expansion Shield.Reflectance sensor QTR-L-1RC - digital (2 pcs) - Pololu 2455
Module with reflective sensor basing on the transmitting LED and phototransistor operating in the infrared range. The sensor is powered with the 5V voltage. The output is the...Magnetic Encoder Pair Kit for Mini Plastic Gearmotors, 12 CPR, 2.7-18V - Pololu 1523
A pair of magnetic quadrature sensors, designed for installation in plastic mini angle motors from Pololu. It consists of a board with the Hall sensor and the plastic impeller...Waterproof temperature sensor - DS18B20 - DFRobot DFR0198
The DS18B20 temperature sensor is encapsulated in a sealed enclosure, allowing it to measure the temperature of places away from the main controller or in wet conditions. The...Force sensor linear potentiometer - 36x10mm - Pololu 2729
The pressure sensor changes its resistance depending on the size and point of application of force on the measurement bar with the length of 36 mm. Sensor allows you to easily...Dust / air quality sensor - PM2,5 PMS1003 - 5V UART
Laser dust sensor that allows you to monitor air purity in real time. It measures PM2.5. The system is powered by 5 V, while the interface works with 3.3 V and communicates...Gravity DFRobot IO Expansion + TB6612FNG 2-channel motor driver 12V/1.2 A - Shield for Arduino
Shield for Arduino which is an extension of the i/O pins and two-channel driver for DC motors TB6612FNG with a voltage of 12 V and performance of 1.2 A per channel. It also has...DFRobot Gravity - IO Expansion Shield for LattePanda
Shield for minicomputer LattePanda of Gravity And/O all GPIO pins that are compatible with standard Arduino and does not interfere with other LattePanda outputs. Every...MLX90614ESF-BCF IR - digital infrared thermometer I2C
Sensor that uses IR to measure temperature in the range from -70 °C to 380 °C. It is communicating via the I2C bus (SMBus) or PWM interface, it has a built-in 17-bit ADC...SS-HDC2010 + CCS811 I2C - temperature, humidity and air purity sensor module
The module is equipped with sensors HDC2010 , which is responsible for checking ambient air quality and CCS811 , which is responsible for measuring temperature and...MLX90614ESF-BCC IR - digital infrared thermometer I2C
Sensor that uses IR to measure temperature in the range from -70 °C to 380 °C. It is communicating via the I2C bus (SMBus) or PWM interface, it has a built-in 17-bit ADC...Gravity - Analog Electrical Conductivity Sensor - DFRobot DFR0300-H
The device allows to measure the salinity of waters and soils by examining the inverse of the resistance, which is conductivity. The conductivity of water can reflect the level...DFRobot Gravity - flame sensor 760-1100nm
The sensor is used to detect fire. It is powered with the voltage from 3.3 V to 5.3 V. The range of the sensed wave: from 760 nm to 1100 nm. The output is an analog voltage....Realtek Ameba RTL8195AM - WiFi + NFC module
The module is equipped with a microcontroller with the core of 32-bit ARM Cortex M3 MCU, allows you to connect to wi-fi and NFC. The system has GPIO connectors, popular...Gesture and RGB color sensor I2C - APDS-9960 - DFRobot SEN0187
The module based on the APDS-9960 chip allows you to detect gestures made by hand movement and colors from the RGB color palette, as well as ambient light. The module is...Digital distance sensor - 50cm - Pololu 4064
Digital distance sensor capable of detecting an object within a radius of up to 50 cm . Supply voltage is in the range from 3 V to 5.5 V and communication is done via a...Force sensor - linear potentiometer 100x10mm - adjustable length - Pololu 2730
The pressure sensor changes its resistance depending on the size and point of application of force on the measurement bar with the length of 100 mm. Sensor allows you to easily...DFRobot Gravity: digital signal isolator IB05_XT-W75R3 I2C
Digital isolator of signal I2C ffrom series Gravity. It protects the sensors from electrical interferences causing a read error through the isolation of I2C signal and...