- New
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
SENSORS - Strona 41
Loading...
Set of 13 modules with cables for Arduino - Waveshare 9467
Set of 13 popular modules compatible with Arduino plates. In the set are i.a.: sensors of flames, color, soil moisture, rotation, sound, liquid level and many others. The...
Index: WSR-04511
Index: WSR-04511
Grove - a set of 5 female-female 4-pin - 2mm/20cm cables without latch
A set of five 4-pin cables Grove, raster 2 mm. They are used to connect Grove sensors with Base Shield Board. Cable length is 20cm. Version without a latch.
Index: SEE-04395
Index: SEE-04395
Camera module with adjustable focus connected to the special connector of minicomputer Raspberry Pi version 3, 2, B+, A+ and older A and B. The device has a matrix CCD 1/4"...
Index: WSR-04521
Index: WSR-04521
Color sensor, light transducer - frequency TCS3200D - module Iduino ME069
Module with color sensor enables a measurement of the RGB components, the output is the frequency which depends on the intensity of light of the selected color. It i s...
Index: MOD-01477
Index: MOD-01477
Liquid flow sensor YF-S402 6l / min - M11x1,25mm thread
Sensor of liquid flow operating in the range from 0.3 to 6 liters per minute. Is supplied with the voltage from 3,5 V to 24 V, the output signal is a frequency proportional to...
Index: SEE-04410
Index: SEE-04410
Tilt/shock sensor - Waveshare 9536
The tilt sensor detects changes in position. It can work as a shock sensor. It works with voltages from 3 V to 5.5 V.
Index: WSR-04497
Index: WSR-04497
Grove - 10kΩ linear rotary potentiometer - top connector
Potentiometer 10 kOhm with linear rotary. It as a 300° range of rotation. It h as a 4-pin Grove connector on the side of the handle.
Index: SEE-04433
Index: SEE-04433
IR beam interruption sensor - LED 5mm - 0-25 cm
The motion detection sensor reacts to the interruption of an infrared light beam that is transmitted between the transmitter and receiver . The devices should be placed...
Index: DNG-18688
Index: DNG-18688
Flame sensor 760-1100nm - analog - Waveshare 9521
The sensor is used to detect fire. It is powered with the voltage from 3.3 V to 5.3 V. The range of the sensed wave: from 760 nm to 1100 nm. The output is an analog voltage...
Index: WSR-04461
Index: WSR-04461
Color sensor, light-frequency converter TCS3200 - Waveshare 9520
Module with color sensor that enables a measurement of the RGB components, the output is the frequency depend on the intensity of the selected color. It is supported by any...
Index: WSR-04932
Index: WSR-04932
Gravity URM09 - ultrasonic distance sensor 2-500cm sensor analog - DFRobot SEN0307
Module with ultrasonic distance sensor URM09, with measuring range from 2 cm to 500 cm. Supply voltage is 3.3 V to 5.5 V. The measuring frequency can reach up to 30 Hz. It...
Index: DFR-14859
Index: DFR-14859
L3GD20H 3-axis, digital I2C SPI gyroscope - Pololu 2129
Sensor to measure the angular velocity in three axes. It works in the range of up to ±240 °/s, ±500 °/s or ±2000 °/sec. It communicates via the I2C or SPI bus, it has the...
Index: PLL-02608
Index: PLL-02608
RFID / NFC MiFare Classic Tag white - 13,56MHz - Adafruit 360
The RFID /NFC identifier in the form of a white marker, is equipped with NXP S50 chip. Each chip has a unique 32-bit code. The devices work at a small distance from the...
Index: ADA-02952
Index: ADA-02952
Strain Beam Module - with 24-bit ADC NAU7802 - STEMMA QT / Qwiic - Adafruit 4538
This Adafruit module, equipped with the NAU7802 , allows you to read data from strain gauge beams . It includes a very high-resolution 24-bit differential ADC with...
Index: ADA-21578
Index: ADA-21578
Inveo Nano TEMP - IoT module with temperature sensor
Inveo module allows remote measurement of temperature via the Internet. It features a waterproof probe with DS18B20 temperature sensor and a 1m long wire.
Index: INV-09121
Index: INV-09121
SPW2430 - module with MEMS microphone - Adafruit 2716
Module with silicon microphone, MEMS type, which does not require amplifier. It detects sound with frequency from 100 Hz to 10 kHz and converts it into an analog output signal...
Index: ADA-04968
Index: ADA-04968
DFRobot Gravity: digital I2C multiplexer - 8-channel
Module with multiplexer that allows you to connect 8 different digital I2C buses to one interface, for each, there are separate pins SDA (bus of data line) and SCL (clock line...
Index: DFR-12628
Index: DFR-12628
Photocell - IR beam interruption sensors
The kit includes: the transmitter and receiver of infrared radiation. Together they create an invisible barrier, which when crossed by a person, an animal or a vehicle, will...
Index: LED-05369
Index: LED-05369
- Reduced price
- SPECIAL OFFERS
Heartbeat Detection Sensor - Iduino SE049
A sensor that allows you to measure your pulse with your finger using a phototransistor. The red LED lights up each time it detects a pulse. Powered by 5 V.
Index: OST-14276
Index: OST-14276
Capacitive touch sensor based on the module TTP223-b is supplied with the voltage from 2 V to 5.5 V, the output is a digital signal.
Index: SEE-04431
Index: SEE-04431
A simple tilt sensor with digital output. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules.
Index: DFR-04279
Index: DFR-04279
LSM6DS33 - 3-axis accelerometer and I2C/SPI gyroscope - Pololu 2736
Sensor allows you to measure 6 variables: acceleration X, Y, Z and angular velocity X, Y, Z. It is a combination of 3-axis accelerometer and gyroscope. It communicates via the...
Index: PLL-05331
Index: PLL-05331
Module from the Grove series, based on the LM386 system and electret microphone. It can be powered with any voltage from 4 V to 12 V. The output is an analog signal. The sensor...
Index: SEE-11350
Index: SEE-11350
DFRobot TCS34725 RGB Color Sensor For Arduino
A module that allows you to make the function to determine the color of ambient light. Applied sensor TCS34725 with a LED backlight and a built-in IR filter. It communicates...
Index: DFR-07591
Index: DFR-07591