Product description: Rosa3D PLA Starter Filament 1.75mm 1kg - included with a reusable spool - Red
Filament made of biodegradable biopolymer in red . The PLA Starter line was designed for beginner 3D printer users. This material is characterized by great ease of printing while maintaining high-detail 3D modeling. PLA Starter exhibits low shrinkage and good adhesion of the first print layers. It does not emit an unpleasant odor when melting. The filament diameter is 1.75 mm . The material weighs 1 kg on a reusable spool.
Our range of filaments also includes other materials and colors.
Filaments used in 3D printing .
Additional information about the PLA
- The perfect choice for beginners
- An environmentally safe product, made of biodegradable biopolymer
- Good adhesion between layers
- High accuracy and detail of the printed detail
- The filament is made from ingredients approved for food contact. However, it's important to remember that for products that come into contact with food, certification is the responsibility of the final product manufacturer.
- PLA Starter filament can be used in 3D printers without heated print beds. If adhesion issues occur, use an adhesion promoter.
| Head temperature | From 190°C to 250°C |
| Table temperature | From 40°C to 60°C |
| Print cooling | From 70% to 100% |
| Recommended print speed | From 60 mm/s to 80 mm/s |
Due to differences in printer design, the above data should be treated as guidelines and the appropriate values should be determined experimentally. |
Filament Rosa3D PLA Starter 1.75mm 1kg - included with a reusable spool - Red.
Technical specifications of the PLA Starter filament
| Parameter | Range |
|---|---|
| Filament dimensional tolerance | +/- 0.05 mm |
| Oval dimensional tolerance | +/- 0.02 mm |
| Heat distortion temperature | 55°C (ASTM E2092) |
| Density | 1.24 g/ cm3 |
| Tensile elongation | 6% (ASTM D882) |
| Tensile strength (break) | 53 MPa (ASTM D882) |
| Elastic modulus | 3500 MPa (ASTM D882) |
| Smell | odorless |
| Filament type | PLA |
| Spool diameter | 200 mm |
| Spool width | 65 mm |
| Mounting hole diameter | 52 mm |
| Vacuum packaging | Yes |
| Moisture absorber | Yes |
| Product weight | 1kg net |
