Textured PEI plate
A matte, grainy surface for PETG and PLA, from which the print releases by itself once the plate cools down.
- New
Over 500,000 customers already trust us. With us you get:
same-day shipping for products marked “24h shipping”
our own service centre in Poland
30 days to return and free delivery in Poland from PLN 500
4.9/5 on TrustMate and 4.9/5 on Google (almost 4,000 reviews)
VAT invoice, leasing and instalments for businesses
For businesses
individual quote for larger quantities
VAT invoice
For schools and universities
orders based on requests for quotation
help with choosing kits for your lab
3D printer - Original Prusa XL+ - 5 heads - Enclosure Bundle - assembled
Five materials with no wipe tower: the Prusa XL+ with five heads changes toolheads in a few seconds in a 360 x 360 x 360 mm build volume and prints up to 10 kg of filament unattended.
- Automatic calibration of toolheads and the first layer
- Printing 10-15% faster than on the Prusa XL
- Enclosure for Prusa XL+ with a HEPA filter included
We could not load the price.
List price
Your price
Net price:
The promotional price does not combine with quantity discounts.
Price:
Regular price:
Remaining time until the promotion ends:
Five heads and an enclosure with HEPA filter
Original Prusa XL+ with five heads is the second generation of the large format Prusa 3D printer with an automatic tool changer and a 360 x 360 x 360 mm build volume. The changer parks one toolhead and picks up the next one with its own material, and the 46.7 l build volume fits large parts in one piece or a whole series of smaller models on one bed.
Five heads, each with its own nozzle and its own filament, let you combine rigid, flexible and soluble materials in one job, and a toolhead change takes only a few seconds.
The package includes the new Enclosure for Prusa XL+ with a 99.9% efficient HEPA filter, which keeps the chamber at up to 50 °C. The version without it is Prusa XL+ 5 heads.
Prusa XL+ with an enclosure, front view
360 x 360 x 360 mm
build volume, 46.7 l
5
heads, each with its own filament
16
separately heated bed zones
10-15%
faster printing than on the Prusa XL
What sets this model apart
Five hot heads instead of purging a single nozzle
Parked toolheads stay heated, so a material change takes only a few seconds and needs no wipe tower or nozzle purging, which according to the manufacturer saves kilograms of filament over longer runs. Please keep in mind that with five 2 kg spools on the sides the printer takes up about 700 x 900 x 720 mm, so prepare a stable, wide workbench for it in advance.
5 heads
active tool changer, each toolhead with its own nozzle
46,7 l
of build volume (CORE One L+: 29.7 l)
automatic
toolhead offset calibration with a sensor (XL: pin)
Case with an insert printed from two materials
Five materials in one print
Each of the five heads has its own material, so in one job you combine a rigid material with flexible TPU and soluble supports. With five 2 kg spools, the printer runs for several days, and the Spool Join function switches to the next spool when the previous one runs out.
- Up to 10 kg of filament with no spool changes during printing
- Expensive composite (e.g. PCCF) on the surface, cheaper PETG in the infill
- Colorful models with no wipe tower and no purge waste
- Nozzles from 0.25 mm for details to 0.8 mm for fast infill in one job
Prusa XL+ and the new generation of Prusa printers
Manufacturer's presentation: what has changed in the Prusa XL+, CORE One L+ and CORE One+ (Gen 2).
Video: the manufacturer's official YouTube channel.
Botland is a reseller of Prusa 3D printers in Poland. Buying from us means original equipment from a warehouse inside the country and fast technical support. We also offer a professional service in Poland and original spare parts.
Pin-free calibration and smoother walls
In the first Prusa XL, toolheads were aligned by hand with a mechanical pin. The XL+ measures toolhead offsets with an electronic sensor, and the first layer is calibrated by the Loadcell sensor, which uses the nozzle as a probe, so you do not set the nozzle-to-bed distance.
- 1.5 mm GT belts reduce fine, repeating patterns on large smooth walls
- New toolhead cooling improves overhangs, and extra fans cool the electronics
- A wiper cleans each nozzle before printing
- Printing is 10-15% faster than on the Prusa XL, also thanks to the new 1.5 mm GT belts
Linear guide and belt of the Prusa XL+ axis
Prusa XL enclosure with the top cover open
Enclosure with HEPA filter included
The Enclosure for Prusa XL+ puts the printer in a stable, enclosed environment: it protects the print from drafts, which cause warping on large parts in ASA, ABS or nylon. Thanks to better sealing, the bed alone heats the chamber up to 50 °C, without an additional heater.
- A HEPA filter with 99.9% efficiency traps ultrafine particles and reduces odor
- The printer screen controls filtration and the LEDs and shows chamber temperature
- A folding magnetic cover at the front improves airflow when printing PLA and PETG
- The enclosure has a metal frame and Plexiglas panels and reduces noise
Large prints on an ordinary workbench
The bed consists of 16 separately controlled heating zones, so the printer heats only the zones under the print, which limits warping and energy use for small models. Despite the 360 mm build volume in every axis, the XL+ fits on an ordinary workbench and draws 235 W on average when printing with PETG from a standard outlet, with no three-phase installation.
- Fully offline operation: slicing, printing and firmware updates without a cloud account
- Ethernet as standard, and the WiFi module can be physically removed
- Open source firmware and the free PrusaSlicer
- Any 1.75 mm filament, with no chips and no subscriptions
A large dragon model printed in one piece on the Prusa XL
Sample prints from the Prusa XL
Expand your Prusa XL+ with accessories
ObXidian nozzle 0.4 mm
A coated tool steel High Flow nozzle, resistant to abrasive carbon fiber materials.
PTFE tube for Prusa XL
A spare tube that guides the filament from the spool to the toolhead, cut to the length you need.
Is it the right choice for you?
A good choice if you:
- print multi-material or in color every day and zero waste matters to you
- want to print for several days without a break from five 2 kg spools
- print large parts in ASA or ABS and want an enclosure with HEPA filtration right away
Consider another option if you:
- two materials are enough for you: choose Prusa XL+ 2 heads with enclosure
- print with PLA and PETG and do not need an enclosure: choose Prusa XL+ 5 heads
What has changed compared to the Prusa XL
| Change | What it means |
|---|---|
| Toolhead offset calibration with an electronic sensor | instead of a manual pin procedure, the printer aligns the toolheads by itself |
| 1.5 mm GT belts | fewer fine repeating patterns on large smooth walls |
| New cooling of toolheads and electronics | better overhangs, fewer supports and cooler electronics during long prints |
| Nozzle wiper | clean nozzles before every print and more accurate calibration |
| Faster printing | 10-15% shorter print time than on the Prusa XL for the same model |
| New Enclosure for Prusa XL+ | included: up to 50 °C in the chamber, and up to 60 °C with an external heater; fits only the XL+ |
| Unchanged | 360 x 360 x 360 mm build volume, tool changer design and list of materials |
Comparison of Prusa XL+ versions
| Prusa XL+ 1 head with enclosure | Prusa XL+ 2 heads with enclosure | Prusa XL+ 5 heads with enclosure | Prusa XL+ 5 heads | |
|---|---|---|---|---|
| Number of toolheads | 1 | 2 | 5 | 5 |
| Materials in one print | 1 | up to 2 | up to 5 | up to 5 |
| Enclosure with HEPA filter included | yes | yes | yes | no |
| Build volume | 360 x 360 x 360 mm | 360 x 360 x 360 mm | 360 x 360 x 360 mm | 360 x 360 x 360 mm |
| See | Prusa XL+ 1 head with enclosure | Prusa XL+ 2 heads with enclosure | this page | Prusa XL+ 5 heads |
Fun fact
Five heads with no wipe tower
In the XL+ every filament has its own toolhead, so according to Prusa the printer can do true multi-material printing without a purge or wipe tower. The tower is on by default, but you can turn it off.
Source: Prusa Help: Printing without purge tower on the XL (Multi-Tool)
Frequently asked questions
How does XL+ differ from XL?
The XL+ has automatic toolhead offset calibration with a sensor instead of a pin, new cooling, a nozzle wiper and 1.5 mm GT belts, and it prints 10-15% faster. The build volume, tool changer and materials are unchanged.
What is the XL+ build volume?
The build volume is 360 x 360 x 360 mm (46.7 l), about 3 times more than in the CORE One+ and 1.5 times more than in the CORE One L+, for large one-piece parts.
Prusa XL+ or CORE One L+?
The CORE One L+ is an enclosed single-nozzle printer with a build volume of about 30 l. The XL+ has over 50% more, 46.7 l, and up to five toolheads in one job, so it suits the largest parts and multi-material printing better.
What if the filament runs out?
Each head has a filament sensor. The printer pauses the print and waits for a new spool, and with the Spool Join function it automatically switches to the next loaded spool, so you can use up to 10 kg of filament unattended.
Which enclosure is included?
The package includes the new Enclosure for Prusa XL+ with a 99.9% HEPA filter, an LED strip and a folding front cover. Thanks to better sealing, the bed alone heats the chamber to 50 °C, without an additional heater.
Is a cloud account required?
No. The printer works fully offline: slicing in PrusaSlicer, printing and firmware updates do not require the internet. Remote monitoring via Prusa Connect is optional.
Package contents
- 1 x Prusa XL+ 3D printer with five heads, assembled
- 1 x Enclosure for Prusa XL+
- 1 x Spring steel plate with powder-coated PEI, satin, double-sided
- 1 x Prusament PLA filament 1 kg
- 1 x Tool kit: universal wrench, 13-16 wrench, pliers, hex and torx keys
- 1 x Prusa bearing grease
- 1 x Alcohol wipes and a nozzle cleaning needle
- 1 x USB drive with sample prints
- 1 x 3D printing handbook
Technical specification
| Parameter | Value |
|---|---|
| Type | FDM 3D printer, CoreXY, active tool changer |
| Number of toolheads | 5 |
| Build volume | 360 x 360 x 360 mm (46.7 l) |
| Filament diameter | 1,75 mm |
| Layer height | 0.05-0.3 mm |
| Extruder | Nextruder, direct drive, 10:1 planetary gearbox |
| Max. nozzle temperature | 290 °C |
| Bed | segmented, 16 separately controlled zones, up to 115 °C |
| Print surface | removable magnetic plate, satin plate included |
| Calibration | automatic: first layer (Loadcell) and toolhead offsets (electronic sensor) |
| Motion system | CoreXY, 1.5 mm GT belts, Input Shaper, Phase Stepping |
| Nozzle cleaning | wiper before every print |
| Sensors | filament sensors, Loadcell, Power Panic, Semitec thermistors, fan speed monitoring |
| Display | 3.5 inch color LCD, touchscreen |
| Connectivity | Ethernet, removable WiFi module, offline operation, Prusa Connect optional |
| Supported materials | PLA, PETG, ASA, ABS, PC, PA, TPU, PVA, HIPS, PP, CPE, PVB, carbon fiber composites |
| Chamber temperature | up to 50 °C with the Enclosure for Prusa XL+, 60 °C with an external heater |
| Power consumption | 235 W on average when printing with PETG, standard outlet |
| Enclosure included | Enclosure for Prusa XL+, HEPA filter 99.9%, LED strip, 15.7 kg |
| Printer dimensions | approx. 700 x 900 x 720 mm with the side spool holders |
| Printer weight | approx. 30 kg |
Useful links
| Name | Value |
|---|---|
| 3D - print surface | 360x360x360mm |
| 3D - type of printout | FFF/FDM |
| 3D - hotend amount | 5 |
| 3D - filament diameter | 1.75 mm |
| 3D - printing thickness | 0.05 - 0.3 mm |
| 3D - nozzle temp | 290 °C |
| 3D - table temp. | 120 °C |
| Pole robocze | Big |
| Wymiary pola roboczego - oś X | 360 mm |
| Wymiary pola roboczego - oś Y | 360 mm |
| Wymiary pola roboczego - oś Z | 360 mm |
| Plug&Play | Yes |
| 3D - Heated chamber | NO |
| 3D - Camera | NO |
| 3D - Multi-material support | Yes |
| 3D - Supported Materials | Advanced |
| 3D - Communication |
|
| Width | 120 cm |
| Height | 80 cm |
| Depth | 80 cm |
| Weight | 54 kg |
Delivery method
Delivery time
Cost
GLS
Shipping in 24 hours
from €8.07
Raben - pallet delivery
Delivery in 3–5 days, no inside delivery
from €96.75
The full delivery terms are on the page Delivery and payment.
30 days to return, without giving a reason
If the product does not meet your expectations, you have 30 days from receiving the parcel to withdraw from the contract. The product only has to be complete. The right of return belongs to consumers (a purchase unrelated to business activity).
Complaints
If the product turns out to be faulty, you can make a claim under the guarantee or the statutory warranty. We handle claims without delay, at the latest within 14 working days of receiving the report together with the goods.
Be the first to ask a question about this product!
Instructions and documents
GPSR data
Country of origin
Czech Republic
Manufacturer contact details
Prusa Research a.s. Partyzánská 188/7A 17000 Praga 7, Republika Czeska
EU market introducer contact details
Botland B. Derkacz Sp. K., Gola 25A, 63-640 Bralin
Other customers also viewed
Products from the same category
See all
