Over 15 years

professional experience

Easy returns

up to 30 days

Over 1 000 000

shipped orders

Fast shipping

all across the EU

Wishlist

Multimeter UNI-T UT139B

Index: LEC-11237 EAN: 5901436796732

Ask a question

Remove from wishlist Add to wishlist

True RMS multimeter with automatic adjustment of range allows you to measure DC and AC up to 600 V, DC and AC current up to 10 A, resistance, capacitance and frequency. The device has the function of recording the latest readings, backlight and sound signal.

€50.90

€41.38 tax excl.

Check quantity

Manufacturer: UNI-T

Description

True RMS multimeter with automatic adjustment of range allows you to measure DC and AC up to 600 V, DC and AC current up to 10 A, resistance, capacitance and frequency. The continuity of the circuit is indicated via an acoustic signal. The device has the function of recording the last measurement and backlight. The meter is powered by two AA 1.5 V batteries which are also in the set. The digital indicator informs about the discharge. Everything is sent in a protected, original box.

Includes:

Test leads
Battery: 2x AA 1.5 V
User manual
Warranty: 24 months

Specification

Option	Range
Constant voltage (DC)	40 mV / 400 mV /4 V / 40 V / 400 V / 600 V
AC voltage AC	40 mV / 400 mV /4 V / 40 V / 400 V / 600 V
DC	400 µA / 4000 µA / 40 mA / 400 mA / 4 A / 10 A
AC	400 µA / 4000 µA / 40 mA / 400 mA / 4 A / 10 A
Resistance	400 Ω / 4 kΩ / 40 kΩ / 400 kΩ / 4 MΩ / 40 MΩ
Capacity	9,999 nF / a 99.99 nF / 999.9 nF / 9,999 µf To 99.99 µf / 999.9 µf / 9,999 mF / 99,99 mF
Inductance	no
Frequency	10 Hz to 10 MHz
Temperature	no
Automatic range selection	yes
Standby mode	no
Sound signal	yes
Transistor tester	no
Tester of diodes	yes
Battery tester	no
Data Hold Function	yes
Battery indicator	yes
Backlight	yes
Display	LCD 1999 (58 x 36mm)
Dimensions	175 x 81 x 48,5 mm
Power	battery 2 x 1.5 V AA included
Weight	370 g

Package width	16 cm
Package height	6 cm
Package depth	26 cm
Package weight	0.6 kg

Send us your question

Józef 05/31/22	Question: Hello Does this multimeter have a function that checks the continuity of the circuit if so in which place because I do not see. Greetings
	Answer: The meter has the ability to check the continuity of the circuit. To do this, connect the red wire to the input jack "Ω" and the black wire to the input jack "COM". Set the rotary switch to the fifth position "Ω" and select the circuit continuity measurement with the SELECT button.