- New
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 10
Loading...
BLS connectors - 5x2 socket - 5pcs.
The socket for the BLS cable, pitch of 2.54 mm. The set includes 5 slots of 5x2.
Index: KAB-04258
Index: KAB-04258
Bipolar transistor NPN Darlington MPSA29 100V/0.8A
Bipolar transistor NPN, 100 V, 800 mA. Pinout: ECB. Price for 1 piece.
Index: UCC-05023
Index: UCC-05023
BleBox tempSensor v2 - temperature sensor Wi-Fi
Complete module enabling temperature measurement through Wi-Fi network using a smartphone app from anywhere in the world. In order to use BleBox, you just need to set up the...
Index: BOX-13841
Index: BOX-13841
Index: UCC-00092
Step-Up/Step-Down Voltage Regulator S7V7F5 - 5V 1A - Pololu 2119
Miniature impulse converter module supplied with the voltage in the range: from 2.7 V to 11.8 V. The output voltage is set at 5 V. Maximum current 1 A. Dimensions: 9 x 12 x 3...
Index: PLL-00941
Index: PLL-00941
2x20 goldpin plug for Raspberry Pi - colored markings
40-pin goldpin plug is compatible with the GPIO connector on a Raspberry Pi Zero and 2B, 3B, 3B+ and 4B. The plug has a colored marking for individual pins, which facilitates...
Index: ODS-12127
Index: ODS-12127
Seeed Xiao ESP32-S3 - WiFi/Bluetooth - Seeedstudio 113991114
The Seeed Xiao is a small module equipped with a powerful ESP32-S3 chip with a dual-core Xtensa 32-bit LX7 processor clocked at 240 MHz . It enables wireless communication...
Index: SEE-22878
Index: SEE-22878
Raspberry Pi tape - camera 75cm 15 wires 1mm raster
Tape with a length of 75 cm connecting the minicomputer Raspberry Pi with the dedicated camera. The connector has 15 veins, pitch is 1 mm.
Index: RPI-02931
Index: RPI-02931
Zener diode of 0,5 W and voltage of 12 V. Price for 10 pieces.
Index: PAS-04957
Index: PAS-04957
ARK connector 2.54mm raster 3 pin (-) - 10pcs
Screw, clamp, 3-pin conector. Pitch of 2.54 mm. Height of 8.5 mm. The screw for the flat screwdriver. Items are sold in sets of 10 pieces.
Index: KAB-09444
Index: KAB-09444
12-Key Capacitive Touch Sensor Breakout - MPR121
The module with the MPR121 system that implements 12 of the capacitive touch buttons. Pins can be connected to any of the objects conducting the electric current. The board...
Index: MOD-07565
Index: MOD-07565
Strain gauge sensor presure force of 50kg
The pressure sensor reduces its resistance when the force put to the square tip, increases. The sensor in the form of a rectangle with the side of 34 mm. For the operation...
Index: MOD-09446
Index: MOD-09446
Rotary potentiometer 1MOhm liniear 1/5W B1M - 5pcs.
The B1M linear rotary potentiometer has three leads that fit on a contactor board. Connected to microcontroller's analog-to-digital converter (e.g. Arduino analog inputs) it...
Index: DNG-19613
Index: DNG-19613
Extension cord for servos 15cm twisted
Extension cable with the length of 15 cm ended with the standard plug for the servos. It has twisted cables.
Index: KAB-01718
Index: KAB-01718
Reflector for photoelectric sensor 6x4cm
Reflector for photoelectric sensors. The size of the refelector - 40 x 60 x 8 mm.
Index: AKS-10611
Index: AKS-10611
IR beam interruption sensor - LED 5mm - 0-50 cm
The sensor reacts to an interruption of the infrared light beam transmitted between the transmitter and receiver . The receiver indicates when the beam is interrupted by...
Index: DNG-18690
Index: DNG-18690
Index: LED-11519
Temperature and humidity sensor DHT22 (AM2302) - module + cables
Module with temperature and humidity sensor with a digital interface, single-wired. Measuring range: temperature -40 to +80 °C, humidity 0-100% RH.
Index: MOD-02637
Index: MOD-02637
BLS connector - 3x1 socket - 5 pcs.
The socket for the BLS cable, pitch of 2.54 mm. The set includes 5 slots of 3x1.
Index: KAB-04623
Index: KAB-04623
Electric cube 3pin 10A/250V in case with strain relief boots
The 3-pin electric cube allows you to connect the wires with a voltage of 250 V with the flow of current up to 10 A. The maximum diameter of the cable is 3 mm. The whole is...
Index: KAB-08076
Index: KAB-08076
Socket DC 5,5/2,1mm for PCB - vertical - 5pcs
Power DC φ5.5 x 2.1 mm slot for printing made of plastic. The connector has a vertical, straight connectors. Set of 5 pcs.
Index: KAB-02738
Index: KAB-02738
MCP23S08-E/P - GPIO expander SPI 8-channel
The chip allows to increase the number of pins (up to 8) of a microcontroller (including Raspberry Pi minicomputer). It communicates with the CPU via the SPI bus.
Index: UCC-04589
Index: UCC-04589
Mounting bracket for distance sensor HC-SR04
Mounting bracket for HC-SR04 distance sensor. Made of transparent acrylic with a thickness of 2.6 mm, it has two mounting holes with a diameter of 3.5 mm.
Index: MOD-04822
Index: MOD-04822
Seeed Xiao ESP32-S3 Sense - set with OV2640 camera - WiFi/Bluetooth - Seeedstudio 113991115
This Seeedstudio kit consists of two modules – the Seeed Xiao ESP32-S3 and the OV3660 camera. The Seeed Xiao module is equipped with an ESP32-S3 chip with a dual-core Xtensa...
Index: SEE-22926
Index: SEE-22926