Product description: Filament Polymaker PolyLite ASA 1.75 mm 1 kg - Red
PolyLite ASA from Polymaker is an alternative to ABS filaments with similar mechanical properties, but with increased resistance to harsh weather conditions and a less perceptible smell produced during printing. The material is distinguished by exceptionally high resistance to UV radiation, heat and moisture. Prints made of PolyLite ASA filament can be exposed to external factors without the risk of damage. On a cardboard , 100% recycled spool there is 1 kg of red filament with a diameter of 1.75 mm .
For large size prints, PolyLite ASA will require a printer with an enclosed build chamber .
Polymaker PolyLite ASA filament 1.75 mm 1 kg - Red.
Beautify your garden with the PolyLite ASA series.
PolyLite ASA filament properties
- High resistance to UV radiation, heat and moisture
- Possibility of exposing printouts to external factors
- The Vicat softening point is 105.3°C
- High impact resistance
- Slightly perceptible fragrance
- Easy processing
- Matte finish
Suggested filament printing parameters
| printing temperature | From 240°C to 260°C |
| table temperature | From 75°C to 95°C |
| Cooling | Not recommended |
| Due to the differences in the construction of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Technical specification and physical properties of the filament
| Parameter | Range |
|---|---|
| Filament diameter | 1.75mm |
| Color | red |
| Print speed | From 30mm/s to 50mm/s |
| printing temperature | From 240°C to 260°C |
| table temperature | From 75°C to 95°C |
| Material density | 1.13g/cm³ |
| Material | Polylite ASA |
| Desiccant | Yes |
| Vacuum packing | Yes |
| net weight | 1 kg |
Useful links |
