- New
Over 500,000 customers already trust us. With us you get:
same-day shipping for products marked “24h shipping”
our own service centre in Poland
30 days to return and free delivery in Poland from PLN 500
4.9/5 on TrustMate and 4.9/5 on Google (almost 4,000 reviews)
VAT invoice, leasing and instalments for businesses
For businesses
individual quote for larger quantities
VAT invoice
For schools and universities
orders based on requests for quotation
help with choosing kits for your lab
MOPA galvo 60W laser source for xTool X1
60 W MOPA galvo laser source for the xTool X1: colour engraving, embossing and metal cutting.
- Pulse width adjustable from 2 ns to 500 ns
- To work you need an xTool X1 with the 20 W diode galvo module
- Includes a 24 V / 14.5 A power supply and an embossing extractor
We could not load the price.
The promotional price does not combine with quantity discounts.
MOPA laser for colour engraving on metal
The 60 W MOPA galvo laser source is an infrared laser for the xTool X1, built for advanced metal processing. It works at a wavelength of 1064 ± 5 nm, and you can adjust the pulse width from 2 ns to 500 ns. The manufacturer recommends it for colour engraving, deep engraving, embossing and metal cutting.
It processes stainless steel, aluminium, brass, silver, platinum and titanium. The source supplies only the beam, so to work you need an xTool X1 with the 20 W diode galvo module.

60 W MOPA galvo source for the xTool X1

60 W MOPA source among the X1 galvo sources, next to the diode galvo module
How does it work?
The MOPA source is a separate laser housing that you mount on the back panel of the X1. The beam travels along a shared optical path to the mirrors of the galvo diode module, which steer it across the material at up to 6000 mm/s. The MOPA laser lets you change the pulse duration, so you control the amount of heat more precisely. On stainless steel this produces oxide layers in blue, gold, purple and green, and 60 W is also enough for deep, detailed engraving such as reliefs.
- Mounting: with the X1 switched off, you fasten the source to the back panel with three screws, then connect the power supply and the connecting cable
- Optics: inside the X1 you screw in the optical window and fit the guide mirror from the set
- Calibration: on first use, the xTool Studio software guides you through calibrating the optical path
- Processing: you place the material, import the design and start the job
Materials: metals, including stainless steel, aluminium, brass and titanium.
Requirements: xTool X1 with the 20 W diode galvo module and the xTool Studio software.
below 67 W
average output power
2-500 ns
adjustable pulse width
415 x 225 mm
metal embossing area with shield
0.04 mm
laser spot diameter
Source construction and mounting
On the back of the source housing there is the laser output window, and underneath are the socket for the cable to the X1 and the power socket. You slide the source onto the locating pins on the back of the X1 and fasten it with three screws. The manufacturer recommends doing this with two people: one holds the housing while the other drives in the screws.
For metal cutting you fit the narrow lens shield from the set, and for embossing the extractor with a dust shield, mounted below the galvo module. Turn the beam adjustment knob only when the software asks you to, because an accidental change shifts the optical path.

Galvo source construction: laser output window (3), the X1 port (4) and the power port (5)
xTool X1 version guide: five laser options
The manufacturer's video presents the five X1 laser options and helps you choose the right device configuration.
Video: the manufacturer's official YouTube channel.

Botland is an official distributor of xTool laser engravers and cutters in Poland. Buying from us guarantees original equipment and fast technical support. The Botland range also includes original accessories and materials for xTool devices.
xTool X1 galvo sources
| UV | Fiber | MOPA | |
|---|---|---|---|
| Wavelength | 355 nm | 1060-1070 nm | 1064 ± 5 nm |
| Average output power | below 6 W | below 34 W | below 67 W |
| Pulse width | below 15 ns | 110-140 ns | 2-500 ns |
| Spot size | 0.017 x 0.017 mm | 0.05 x 0.05 mm | 0.04 x 0.04 mm |
| Power supply included | 25 V / 8 A | 25 V / 8 A | 24 V / 14.5 A |
| Best for | engraving inside glass, fine engraving | metal marking and shallow engraving | colour engraving, embossing, metal cutting |
| UV | Fiber |
Is it the right choice for you?
A good choice if you:
- engrave colour designs on stainless steel
- do serial embossing and metal cutting
- have an X1 with the diode galvo module
Consider another option if you:
- mark metal day to day, without colour or relief: see the fibre source
- engrave glass and crystal: see the UV source
Frequently asked questions
Will the MOPA source work without the diode module?
No. The source supplies only the beam, and processing requires the 20 W diode galvo module.
Which metals does the 60 W MOPA source process?
The manufacturer lists stainless steel, aluminium, brass, silver, platinum and titanium.
Do I need an accessory for cutting metal?
Yes, the narrow lens shield, which you will find in the MOPA source set.
Which calibration sheets should I use after buying the source?
The five large calibration sheets supplied with the source. The manufacturer warns not to use the two small sheets from the X1 set.
Package contents
- 1 x 60 W MOPA galvo laser source
- 1 x 24 V / 14.5 A power supply
- 1 x Power cable
- 1 x Narrow lens shield
- 1 x Embossing extractor
- Knurled screws
- 1 x Optical window
- 1 x Guide mirror
- 1 x Connecting cable
- Screws
- 1 x Screwdriver
- 1 x Optical window installation tool
- 1 x Calibration card
- 1 x Laser calibration tool
- 1 x User manual
Technical specification
| Parameter | Value |
|---|---|
| Type | galvo laser source |
| Manufacturer | xTool |
| Compatibility | xTool X1 with the 20 W diode galvo module |
| Laser type | MOPA, infrared |
| Wavelength | 1064 ± 5 nm |
| Average output power | below 67 W |
| Beam divergence | below 0.5 mrad |
| Pulse width | 2-500 ns |
| Repetition rate | 1-4000 kHz |
| Spot size | 0.04 x 0.04 mm |
| Max. speed | 6000 mm/s |
| Embossing area | 415 x 225 mm with the embossing shield |
| Max. power consumption of the X1 with the source | 300 W |
| Power supply | 24 V / 14.5 A (included) |
| Operating temperature | 0-35 °C |
Useful links
Technical data: xtool.com and support.xtool.com, as of November 2026.
| Name | Value |
|---|---|
| Rodzaj pracy urządzenia | Cutting and engraving |
| Moc lasera | 60 W |
| CNC - Obsługiwane materiały | Advanced |
| CNC - Typ lasera | MOPA |
| Width | 60 cm |
| Height | 40 cm |
| Depth | 25 cm |
| Weight | 15 kg |
The full delivery terms are on the page Delivery and payment.
30 days to return, without giving a reason
If the product does not meet your expectations, you have 30 days from receiving the parcel to withdraw from the contract. The product only has to be complete. The right of return belongs to consumers (a purchase unrelated to business activity).
Complaints
If the product turns out to be faulty, you can make a claim under the guarantee or the statutory warranty. We handle claims without delay, at the latest within 14 working days of receiving the report together with the goods.
Be the first to ask a question about this product!
Instructions and documents
GPSR data
Product information
This product is a component intended for further assembly or prototyping. It is not a finished product within the meaning of the product safety regulations.
There are no reviews for this product yet.
Products from the same category
See all ›
MOPA galvo 60W laser source for xTool X1
Ask about the product
Have a question about this product? Send us a message and we will get back to you.
We usually reply within one business day. The answer is sent to the e-mail address you provide.