Product description: Sunlu PLA+ filament 1.75 mm 1 kg - Gray
Gray PLA+ filament , made of materials consisting mainly of corn starch. Thanks to this, the filament is fully biodegradable and environmentally friendly. The filament diameter is 1.75 mm . It is intended for 3D printers using FDM technology. The net weight of the filament is 1 kg . The product was vacuum packed with a moisture absorber. The material should be protected from sunlight and excessive moisture.
Sunlu PLA+ filament 1.75 mm 1 kg - Gray.
Properties of PLA filament from Sunlu
- It does not emit odor during printing
- Biodegradable material, composed of corn starch
- The filament is hardened and resistant to breaking
- The material is characterized by low shrinkage
- The finished print is smooth and delicate to the touch
Suggested filament printing parameters
| Head temperature | From 200°C to 230°C |
| Table temperature | From 60°C to 80°C |
| Print cooling | Recommended |
|
Due to differences in the design of printers, the above data should be treated as guidelines and appropriate values should be determined experimentally. |
Technical specifications and physical properties of the Sunlu PLA+ filament
| Parameter | Range |
|---|---|
| Filament diameter | 1.75mm |
| Designed for 3D printing technology | FDM |
| Printing speed | from 50 to 100 mm/s |
| Color | gray |
| Tensile strength | from 11 to 15 kgf |
| Tolerance | ≥ 0.2mm |
| Spool - material | PLA+ |
| Spool diameter | 195 mm |
| Spool width | 59mm |
| Mounting hole diameter | 72mm |
| Vacuum packaging | Yes |
| Desiccant | Yes |
| Filament length | 330 m |
| Net product weight | 1 kg |
