- Reduced price
- Sale
- Sale
- Sale
SPECIAL OFFERS
Loading...
Electromagnet pulling 12V 7,8W 0,8kg
The electromagnet is equipped with a 10 mm long bolt, which after receiving a 12 V voltage signal performs a linear pulling movement. The device consumes approx. 0.65 A...
Index: DNG-17759
Index: DNG-17759
- Sale
- SPECIAL OFFERS
LED RGB Ring WS2812 5050 x 12 diodes - 38mm
The ring consists of 12 individually addressed RGB LEDs 5050 with integrated control unit. Module needs one microcontroller output. Outer circle diameter is 38 mm.
Index: LED-09400
Index: LED-09400
- Sale
- SPECIAL OFFERS
Inductive proximity sensor LJ30A3-10-Z / CY 10mm 6-36V
Inductive proximity sensor with a 100 cm cable. It includes nuts for easy installation and detects metal up to 10 mm away. Powered by a voltage of 6 V to 36 V, object...
Index: DNG-18408
Index: DNG-18408
- Sale
- SPECIAL OFFERS
Strip LED SMD5050 IP65 14,4W, 60 LED/m, 10mm, warm white - 5m
RGB LED strip powered by a voltage of 12 V with self-adhesive tape. Consumes power: 14.4 W/m, density of 60 diodes per meter. The color of the light is warm white. Protection...
Index: LED-07081
Index: LED-07081
- Sale
- SPECIAL OFFERS
Electromagnet pulling 12V 0.4kg
The device allows to perform a linear - pulling motion with a voltage signal of 12 V. The range of the bolt is approximately 10 mm.
Index: DNG-12093
Index: DNG-12093
- Sale
- SPECIAL OFFERS
Connecting wires male-male 20cm red- 100pcs.
Set of 100 copper connection cables with a length of 20 cm in red color.
Index: GRL-13581
Index: GRL-13581
- Sale
- SPECIAL OFFERS
Strip LED SMD5050 IP20 14,4W, 60 LED/m, 10mm, warm white - 5m
LED strip powered by a voltage of 12 V with self-adhesive tape. Consumes power: 14.4 W/m, density of 60 diodes per meter. The color of the light is warm white. Protection...
Index: LED-07084
Index: LED-07084
- Sale
- SPECIAL OFFERS
Connecting wires female-female 20cm white- 100pcs.
Set of 100 copper connection cables with a length of 20 cm in white color.
Index: GRL-13585
Index: GRL-13585
- Sale
- SPECIAL OFFERS
Connecting cables Male-female 20cm yellow - 100pcs.
Set of 100 copper connecting wires 26AWG with the length of 20 cm in yellow color.
Index: DNG-11906
Index: DNG-11906
- Sale
- SPECIAL OFFERS
Inductive proximity sensor LJ30A3-10-Z / BY 10mm 6-36V
Inductive, digital proximity sensor with a cable with the length of 100 cm and nuts to facilitate mounting. It detects metal at a distance of 15 mm. The object detection is...
Index: DNG-11875
Index: DNG-11875
- Sale
- SPECIAL OFFERS
Inductive proximity sensor LJ18A3-5-Z / CY 5mm 10-30V
Inductive, digital proximity sensor with a cable with the length of 100 cm and nuts to facilitate mounting. It detects metal at a distance of up to 5 mm. The object detection...
Index: DNG-11858
Index: DNG-11858
- Sale
- SPECIAL OFFERS
Inductive proximity sensor LJ30A3-15-Z / BX 15mm 6-36V
Inductive, digital proximity sensor with a cable with the length of 100 cm and nuts to facilitate mounting. It detects metal at a distance of 15 mm. The object detection is...
Index: DNG-11873
Index: DNG-11873
- Sale
- SPECIAL OFFERS
HSTX 22-pin DVI adapter for Raspberry Pi 5/IoT RedBoard RP2350 - SparkFun BOB-28468
The SparkFun adapter takes the 22-pin interface found in the HSTX connector on the Raspberry Pi 5 and RP2350 IoT RedBoard boards and physically feeds it into an HDMI...
Index: SPF-26599
Index: SPF-26599
- Reduced price
- SPECIAL OFFERS
A set of 18 types bipolar transistors in TO92 case, 10 pieces in each.
Index: UCC-07579
Index: UCC-07579
- Sale
- SPECIAL OFFERS
Connecting wires male-male 20cm black - 100pcs.
Set of 100 copper connection cables with a length of 20 cm in black color.
Index: GRL-13584
Index: GRL-13584
- Sale
- SPECIAL OFFERS
FeatherWing - 6 port Grove + STEMMA QT expansion module for Feather boards - Adafruit 5862
FeatherWing from Adafruit is an expansion module for Feather boards , allowing you to connect up to 6 devices with a Grove connector . Equipped with 3 analog / digital...
Index: ADA-25282
Index: ADA-25282
- Reduced price
- SPECIAL OFFERS
Electromagnet holding 12V 2W 5kgf
Holding electromagnet with a maximum load capacity of 5 kg (at standard gravitational acceleration of 9.8 m/s 2 ). Powered by 12 V. Current consumption is...
Index: DNG-17568
Index: DNG-17568
- Sale
- SPECIAL OFFERS
THT 26pin prototype board with screw connectors for Raspberry Pi
Board allows independent creation of electronic circuits. Connected directly to the GPIO pins of the Raspberry Pi minicomputer. It has soldered screw connections and goldpin...
Index: MOD-05662
Index: MOD-05662
- Sale
- SPECIAL OFFERS
Analog timer TS-WF1 - Kemot URZ2001-2
Analog-controlled timer by Kemot, equipped with one 230 V socket. It allows you to automatically turn on and off electrical devices, which helps to save energy and reduce...
Index: LEC-24457
Index: LEC-24457
- Sale
- SPECIAL OFFERS
Precision potentiometer, multi-turn 20kΩ
Potentiometer POT2218P-20K : wire, precision, multi-turn, 2 W. 20 kΩ, ±5%.
Index: PAS-00846
Index: PAS-00846
- Sale
- SPECIAL OFFERS
Micro motor N20-BT29 75:1 400RPM - 9V
The N20 series miniature motor with 75:1 gearing, has 400 RPM, torque is equal to 1.6 kg*cm (0.157 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12572
Index: DNG-12572
- Sale
- SPECIAL OFFERS
Micro motor N20-BT23 50:1 420RPM - 9V
The N20 series miniature motor with 50:1 gearing, has 420 RPM, torque is 0.9 kg*cm (0.088 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12565
Index: DNG-12565
- Sale
- SPECIAL OFFERS
Micro motor N20-BT32 100:1 320RPM - 9V
The N20 series miniature motor with 100:1 gearing, has 320 RPM and the torque is 2.2 kg*cm (0.216 Nm) . The supply voltage ranges from 3 V to 9 V.
Index: DNG-12591
Index: DNG-12591
- Sale
- SPECIAL OFFERS
Micro motor N20-BT44 250:1 90RPM - 6V
The N20 series miniature motor with 250:1 gearing, has 90 RPM, torque is equal to 3 kg*cm (0.294 Nm). The supply voltage is 6 volts.
Index: DNG-12606
Index: DNG-12606
- Sale
- SPECIAL OFFERS