Product description: reComputer J202 - carrier board for Jetson Nano / Xavier NX / TX2 NX - Seeedstudio 102991714
reComputer J202 is a high-performance, interface-rich carrier board compatible with Nvidia Jetson Nano / Xavier NX , equipped with HDMI 2.0, DisplayPort, Gigabit Ethernet, 4 x USB 3.1 A, USB C, M.2 key E, M.2 key M , 2 x CSI, CAN, GPIO, I2C, I2S, fan connection link, RTC, RTC socket. It has the same functionality and dimensions as the Jetson Xavier NX Developer Kit . With the NVIDIA Jetson module mounted, it can run the NVIDIA JetPack package which includes motherboard support package (BSP), Linux operating system, NVIDIA CUDA software libraries, cuDNN and TensorRT for deep learning, computer vision, GPU computing, multimedia processing and many other uses. The board has been equipped with many connectors that allow for the simultaneous connection of several cameras, which enables the parallel running of neural networks in such applications as image classification, object detection, segmentation and speech processing.
reComputer J202 - carrier board for Jetson Nano / Xavier NX / TX2 NX.
Carrier plate for Jetson Nano / Xavier NX / TX2 NX.
product specification
- Interfaces:
- 1x HDMI
- 1x DisplayPort
- 2x CSI
- 1x Gigabit Ethernet (10/100/1000 Mbps)
- 4x USB 3.1 A
- 1x USB C
- 1x M.2 Key M
- 1x M.2 Key E
- 1x fan connector
- 1x CAN
- 1x 40-pin multi-function port
- 1x 12-pin multi-function port
- 1x RTC 2-pin
- 1x RTC socket
- Dimensions: 100 x 80 mm
Description of the pins on the board
1. RTC
2. CAN bus connector
3. USB C socket
4. CAN bus connector
5. USB B socket
6. UART interface
7. RTC
8. MIPI-CSI camera connector x 2
9. DisplayPort and HDMI socket
reComputer J202 - carrier board for Jetson Nano / Xavier NX / TX2 NX - top view.
reComputer J202 - top view.
Description of the pins on the board
10. Power socket
11. CAN bus connector
12. Connector for connecting the fan
13. GPIO pins
14. SODIMM 260-pin
15. USB 3.0 port x 4
16. PoE
17. Gigabit Ethernet port
18. LED diode
19. USB Type-C port
Description of the pins on the board
20. M.2 KEY E connector
21. RTC socket
22. M.2 KEY M connector
reComputer J202 - carrier board for Jetson Nano / Xavier NX / TX2 NX - bottom view.
We recommend using a 9 V to 12 V power supply, however the J202 is able to handle a power supply of max. 15 V.
Useful links |
