Product description: Universal single sided prototyping tile - 100 x 50 mm - Rademacher 710-1
Single sided prototyping board with universal use. Made of hard paper and covered with a layer of copper with a thickness of 35 µm, which significantly increases its strength and mechanical resistance. Length of the prototyping board is 50 mm and its width is 100 mm. It has as many as 39 rows of holes with a hole pitch of 2.54 mm. Manufactured by Rademacher - is the highest quality equipment that we can use to learn and create new elements. The prototyping board will come in handy wherever there is a need to place an accessory or sensor on a module or when creating a prototype construction and design.
Single sided universal prototyping board - 100 x 50 mm - Rademacher 710-1.
Allows you to transfer and solder a prototype circuit from a contact board while maintaining the component layout.
Prototyping board - what elements to use? All you can find in Botland shop!
- Universal board what wires to use?
- Connector board accessories
- Botland Universal Prototyping Board
- Useful mounting electronics
- Diodes - LED, rectifier, Schottky, Zener
- Passive electronics:
Technical specification of the prototyping board
- Manufacturer: Rademacher
- Manufacturer designation: 710-1
- Type: universal PCB
- PCB version: prototyping PCB, single-sided
- PCB material: hard paper
- Board coating type: copper
- Copper coating thickness: 35 µm
- Raster of solder fields on the PCB: 2.54 mm
- Number of rows: 39
- Dimensions of prototype board:
- Length: 50 mm
- Width: 100 mm
- Thickness: 1.6 mm
- Diameter of the mounting hole in the board: 1 mm
- Weight: 9.7 g
Board has 39 rows of leads with 2.54 mm spacing.
