- New
Product description: Creality SpacePi X4 Filament Dryer
The Creality SpacePi X4 Filament Dryer is designed to effectively reduce moisture buildup in 3D printing materials. Properly dried filament can help maintain more stable printing conditions and reduce issues related to moisture absorption.
The device allows you to set temperatures from 45°C to 85°C and operating times from 1 to 48 hours. It supports popular materials such as PLA, PETG, ABS, ASA, PET, PA, PAHT, PC, PVA, PP, and TPU, as well as their variants. The manufacturer recommends using the appropriate drying temperature for the specific filament.
Creality SpacePi X4 Filament Dryer. 
The Creality SpacePi X4 filament dryer is designed to effectively reduce moisture buildup in 3D printing materials.Special features
- Temperature control - range from 45°C to 85°C allows you to adjust the parameters to different filaments
- Drying time up to 48 hours - allows for short and long drying cycles
- 3.2" touch screen - ensures convenient configuration of operating parameters
- Automatic drying - facilitates the selection and control of the filament preparation process
- Active Silent - limits the fan speed when the set temperature is reached
- Triple protection - monitors the fan and temperature during operation
- NTC sensor - automatically stops drying when an incorrect temperature is detected
- PTC fuse - provides additional protection against overheating
- Supports 1.75mm and 2.85mm filaments - ensures wide compatibility
- Large spools - supports models up to 200mm in diameter and 150mm in width
- PTFE hose connector - makes it easy to guide the filament directly into the printer
- Moisture-restricting design - helps maintain proper material storage conditions
Practical applications
The Creality SpacePi X4 is perfect for home workshops, service centers, laboratories, and professional 3D printing stations, especially when working with materials susceptible to moisture absorption.
The dryer can be used for preparing filaments before printing, for long-term drying of technical materials, and for maintaining filament in the proper conditions during printer operation. It is particularly useful when using materials such as PA, PAHT, PC, PVA, and TPU , but can also be used with popular PLA, PETG, ABS, and ASA filaments.
Wide filament compatibility
The SpacePi X4 supports spools up to 200 mm in diameter and 150 mm in width. The device is compatible with 1.75 mm and 2.85 mm filament.
The manufacturer specifies compatibility with PLA, PETG, ABS, ASA, PET, PA, PAHT, PC, PVA, PP, and TPU, among others. Materials requiring drying at temperatures up to 85°C can be prepared within the device's standard operating range. In the case of filaments requiring a higher temperature, the manufacturer indicates the possibility of extending the drying time.
Designed for easy printing directly from the dryer
The device is equipped with a PTFE hose connector and outlets located on the top and rear of the housing. This solution makes it easier to guide the filament towards the 3D printer during drying.
The design also incorporates a moisture-restricting seal, a sliding lock, and rollers designed to reduce the risk of user contact with hot components.
Properly dried filament can help maintain more stable printing conditions and reduce problems resulting from the material absorbing moisture.
The device allows you to set the temperature in the range from 45°C to 85°C.Technical specifications
- Product type: filament dryer
- Temperature range: 45°C to 85°C
- Drying time: from 1 hour to 48 hours
- Screen diagonal: 3.2"
- Housing material: ABS, PA, PC
- Flame retardancy class: UL 94 V-0
- Rated power: 360 W
- Input voltage for UK / GB / EUR / AUS / BRA / CHL / ARG versions: 220 V to 240 V AC
- Input voltage for US/JPN version: 100V to 120V AC
- Input voltage frequency: 50 Hz to 60 Hz
- Supported filament diameters: 1.75 mm, 2.85 mm
- Maximum spool diameter: 200 mm
- Maximum spool width: 150 mm
- Supported materials: PLA, PETG, ABS, ASA, PET, PA, PAHT, PC, PVA, PP, TPU and their variants
- Dimensions: 382 x 290 x 270 mm
- Weight: 5 kg
