- New
Product description: Feberis Pro - RF / WiFi / BLE / GPS expansion module for Flipper Zero
Feberis Pro is a professional extension for Flipper Zero , designed for specialists specializing in cybersecurity, IoT device auditing, and radio communication analysis. The module combines two CC1101 chips for the 433 MHz and 868 MHz bands, an nRF24 module for 2.4 GHz communication, an ESP32 microcontroller with WiFi and BLE support, and a GPS receiver in a single design. It enables RF signal analysis, wardriving, BLE device detection, WiFi network scanning, packet capture, and IoT device vulnerability testing. Feberis Pro works with the popular Marauder and Ghost_ESP software and is compatible with alternative Flipper Zero firmware. Thanks to its compact design and power supply directly from the GPIO, the module is ready to operate without additional batteries or cables.
Feberis Pro - RF / WiFi / BLE / GPS expansion module for Flipper Zero.
Feberis Pro is ready to use right out of the box, requiring no pre-programming or external power supplies.
Main features of Feberis Pro
- 5 integrated radio modules : support for RF, Sub-GHz, WiFi, BLE, GPS and 2.4 GHz communication
- 2 CC1101 modules : simultaneous support of 433 MHz and 868 MHz bands
- ESP32 with WiFi and BLE : network scanning, packet capture and security audit capabilities
- nRF24 module : analysis of IoT devices operating in the 2.4 GHz band
- Built-in GPS : Record coordinates during wardriving and network analysis
- High-performance antennas : increased operating range and better signal reception quality
- Alternative Firmware Support : Marauder and Ghost_ESP compatible
- Powered by GPIO Flipper Zero : no additional power supply required
- Ready to use after connection : the device works immediately after installation
IoT Security Audit and Wardriving with Feberis Pro
Modern IoT devices, smart home systems, and wireless communication utilize a variety of data transmission standards, such as WiFi, BLE, Sub-GHz, and 2.4 GHz. Feberis Pro enables the analysis of these protocols using a single, compact module compatible with Flipper Zero, significantly simplifying the diagnostics and security testing process . Thanks to the built-in GPS module, the device can record the location of detected networks and devices during wardriving. This allows the creation of maps of WiFi access points, BLE beacons, and IoT devices, which is particularly useful during wireless infrastructure audits, penetration testing, and vulnerability analysis of radio communication systems. Feberis Pro also supports network traffic analysis, the detection of vulnerable devices, and the examination of RF communication performance . Compatibility with Ghost_ESP and Marauder firmware provides extensive diagnostic tools used in both educational and professional cybersecurity environments.
Thanks to such a rich hardware configuration, you gain the ability to simultaneously monitor, capture and analyze packets in key wireless protocols.
The module included in the set has four external antennas.
Feberis Pro Technical Specifications
- Compatibility: Flipper Zero
- Communication interface: GPIO
- Radio modules:
- 2x CC1101 - 433 MHz and 868 MHz
- nRF24 - 2.4 GHz
- ESP32 - WiFi and BLE
- Built-in GPS module
- Supported features:
- RF analysis
- WiFi scanning
- BLE analysis
- wardriving
- packet capture
- 2.4 GHz IoT analysis
- Antennas:
- 1x 433 MHz - 3 dBi
- 1x 868 MHz - 3 dBi
- 1x 2.4 GHz WiFi - 8 dBi
- 1x 2.4 GHz nRF24 - 3 dBi
- Status indication: 7x LED
- Operating temperature range: -10°C to 60°C
- Power: via GPIO Flipper Zero
Contents of the set
- 1x Feberis Pro
- 4x External antenna
- 1x GPIO Shield
Useful links |
