In this category, we have collected complete hotend heads and heating blocks for 3D printers (less often: 3D printer heating blocks). They are used to ensure the correct temperature during printing. Without the correct selection of the hotend, there is no way to properly heat the filament in the 3D printing process. Their job is basically to melt the solid filament into a liquid form so that the molten material can be pushed into the nozzle and out in the formed form of the 3D print.
- Reduced price
- Promotion
SenseCAP S2106 - water pH sensor - LoRaWAN - Seeedstudio 101070001
Index: SEE-22928
- Reduced price
- Promotion
Set of filaments Spectrum PLA Premium 1,75mm 1,25kg - 5 colors
Index: SPC-22287
- Reduced price
- Promotion
Li-Ion Titan 3000mAh 16C 2S 7.4V battery (Stick) - DEAN - 18x132mm
Index: GFR-19649
- On sale!
- Promotion
- Reduced price
- Promotion
GJ-M12-25IR(5MP)-3 M12 25mm 5Mpx lens - for Raspberry Pi camera
Index: RPI-22483
- Reduced price
- Promotion
Hotends and heating blocks
Products: 23
Loading...
Original spare part designed to work with 3D printing module, which is equipped with Snapmaker version 2.0. It is a fully integrated kit ready to connect right out of the box....
Index: SNM-19179
Index: SNM-19179
A complete hotend for the Ender-3 printer, an original part manufactured by Creality . The hotend has a heating tube and thermistor. It also contains a printing nozzle...
Index: CRL-15767
Index: CRL-15767
Hotend kit for Sermoon V1 Pro 3D printer
Assembled hotend head components used in Creality 3D printers: Sermoon V1 Pro and Sermoon V1. The set includes: a heating block, throat pipe, thermistor and heater with leads...
Index: CRL-21513
Index: CRL-21513
Hotend kit for Creality K1 and K1 Max 3D printers
Hotend head designed for Creality K1 series printers. The set includes: heat break, a heater with cables, a thermistor and a nozzle with a 0.4 mm hole. The hotend is an...
Index: CRL-23427
Index: CRL-23427
Heating block Creality Ender-3 and CR-10S
Heating block which is a part of hotend head in Ender-3 and CR-10S 3D printers. This is an original product of the printer manufacturer, Creality. Block measures 20 x 20...
Index: CRL-15774
Index: CRL-15774
Hotend kit for Creality CR-M4 3D printer
Original hotend head dedicated to the Creality CR-M4 printer. The head includes: heat break, a heater with cables, a thermistor and a nozzle with a 0.4 mm hole. The hotend is...
Index: CRL-23421
Index: CRL-23421
Hotend kit for Dual Extrusion Module - 0,8mm - Snapmaker
Hotend head compatible with the Dual Extrusion module used in Snapmaker 2.0 and Snapmaker Artisan printers. The hotend has a copper nozzle with a hole diameter of 0.8 mm .
Index: SNM-23444
Index: SNM-23444
- Reduced price
- Promotion
Heating block for Flashforge Inventor II, Flashforge Inventor II S 3D printer
Heating block which is an original spare part for Flashforge Inventor II and Flashforge Inventor II S printers. The product is an element of the hotend head . It is made of...
Index: FFO-19400
Index: FFO-19400
- Reduced price
- Promotion
Hotend kit for Dual Extrusion Module - 0,4mm - Snapmaker
Hotend head compatible with the Dual Extrusion module used in Snapmaker 2.0 and Snapmaker Artisan printers. The hotend has a copper nozzle with a hole diameter of 0.4 mm .
Index: SNM-23442
Index: SNM-23442
Assembled hotend E3D for Prusa i3 MK3S+ 3D printer
Assembled hotend head used in the Prusa i3 MK3S + printer. The product is an original spare part of the device manufacturer. It is characterized by high quality of...
Index: PSA-21354
Index: PSA-21354
Hotend kit for Snapmaker J1 3D printer - 0,4mm - 2pcs
A set of two original hotends designed for the Snapmaker J1 / J1s printer. The heads are equipped with copper nozzles with a hole diameter of 0.4 mm . They have silicone...
Index: SNM-23450
Index: SNM-23450
- Reduced price
- Promotion
Hotend kit for Dual Extrusion Module - 0,2mm - Snapmaker
Hotend head compatible with the Dual Extrusion module used in Snapmaker 2.0 and Snapmaker Artisan printers. The hotend has a copper nozzle with a hole diameter of 0.2 mm .
Index: SNM-23441
Index: SNM-23441
Hotend kit for Dual Extrusion Module - 0,2mm - hardened nozzle - Snapmaker
Hotend head compatible with the Dual Extrusion module used in Snapmaker 2.0 and Snapmaker Artisan printers. The hotend has a hardened nozzle with a hole diameter of 0.4 mm .
Index: SNM-23445
Index: SNM-23445
Hotend kit for Snapmaker J1 3D printer - 0,8mm - 2pcs
A set of two original hotends designed for the Snapmaker J1 / J1s printer. The heads are equipped with copper nozzles with a hole diameter of 0.8 mm . They have silicone...
Index: SNM-23452
Index: SNM-23452
- Reduced price
- Promotion
A spare heater block, which is an element of Hotend. Part for 3D printers.
Index: PSA-13716
Index: PSA-13716
Hotend kit for Snapmaker J1 3D printer - 0,2mm - 2pcs
A set of two original hotends designed for the Snapmaker J1 / J1s printer. The heads are equipped with copper nozzles with a hole diameter of 0.2 mm . They have silicone...
Index: SNM-23449
Index: SNM-23449
Hotend kit for Snapmaker J1 3D printer - 0,2mm - hardened nozzle - 2pcs
A set of two original hotends designed for the Snapmaker J1 / J1s printer. The heads are equipped with hardened nozzles with a hole diameter of 0.4 mm . They have...
Index: SNM-23453
Index: SNM-23453
Hotend kit for Dual Extrusion Module - 0,6mm - Snapmaker
Hotend head compatible with the Dual Extrusion module used in Snapmaker 2.0 and Snapmaker Artisan printers. The hotend has a copper nozzle with a hole diameter of 0.6 mm .
Index: SNM-23443
Index: SNM-23443
Hotend kit for Snapmaker J1 3D printer - 0,6mm - 2pcs
A set of two original hotends designed for the Snapmaker J1 / J1s printer. The heads are equipped with copper nozzles with a hole diameter of 0.6 mm . They have silicone...
Index: SNM-23451
Index: SNM-23451
Hotend for Prusa i3 MK3S - assembled
Fully assembled hotend head for 3D printer Prussia i3 MK3S. It is an original part of the printer manufacturer. It is characterized by high quality and full compatibility...
Index: PSA-15791
Index: PSA-15791
All Metal Hotend Kit for Creality CR-10S PRO / CR-10Ss Pro v2 / CR-10 Max
A set of parts allowing to assemble a metal hotend in Creality CR-10S PRO and CR-10 Max 3D printers. The manufacturer of the parts package is a reputable brand MicroSwiss ....
Index: MIS-21024
Index: MIS-21024
All Metal Hotend Kit for Creality CR-6 SE / CR-6 MAX / CR-10 Smart
A set of parts that allows you to install a metal hotend in Creality CR-6 SE, CR-6 MAX and CR-10 Smart 3D printers (the last model requires you to print the fan adapter...
Index: MIS-21025
Index: MIS-21025
Assembled hotend E3D for Prusa Mini and Mini+ 3D printer
Assembled hotend used in Prusa Mini and Mini + 3D printers. It is an original spare part of the Prusa brand. The components of the heating head are already assembled, which...
Index: PSA-21476
Index: PSA-21476
See also
- Sensors for 3D printers
- Thermistors for 3D printers
- Heaters for 3D printers
- Cables for 3D printers
- Fans for 3D printers
- Stepper motors for 3D printers
- Extruders
- Displays for 3D printers
- Motherboards for 3D printers
- Work table overlays and stickers
- Power supplies for 3D printers
- FEP foils
- Parts kits
- Hot beds
- Pneumatic connectors and PTFE tubes
- StepStick - stepper motor controllers
- Other elements
3D printer heat - hotend head, filament and melting
After initial melting in the extruder, our filament must be delivered to the heating block, where it changes its consistency to partially liquid. Thanks to this, the print is arranged in a precise way, using the layer-by-layer method, and thanks to this, it is considered such an incredibly precise way of producing dream objects. To ensure that the filament solidifies quickly enough when printing, the heating block with the nozzle is additionally cooled by a fan. A hotend can therefore be described as an element of an FDM 3D printer that heats, melts and extrudes the material layer by layer through a nozzle. Why are you so important? Because the whole structure of the hotend helps to maintain a constant, accurate temperature and ensure optimized heat dissipation.
Choosing a hotend for a 3D printer
Printer compatibility may not be a problem, but it is certainly a factor that you obviously need to consider before buying. Because 3D printer hotends are not universal, some form of custom mounting is often required. The good news is that they are often 3D printed. Many hotends have mounting structures that can help. A good hotend should not get too hot, and certainly not after turning off the 3D printer, avoid the clogging effect, i.e. clogging of the 3D printer nozzle and the heat creep effect, i.e. the filament melts too early due to the heat dissipating (moving) up the hotend itself.
3D printing accessories, spare parts for 3D printers at Botland
After reading the paragraph above, you can be sure that the heating block is practically the foundation of a successful 3D print. The best guarantee of choosing the right component is shopping at Botland - 3D printing has been our passion for over a decade. We encourage you to familiarize yourself with the other accessories, modules and 3D printers themselves in the assortment, as well as with numerous guides on the Botland Blog.