Product description: Raspberry Pi DAC Pro - IQaudIO sound card for Raspberry Pi
The Raspberry Pi DAC Pro is based on the Burr Brown PCM5242 32-bit / 384 kHz converter, allowing for Full HD 24-bit / 192 kHz audio playback. The PCM5242 is the bigger brother of the PCM5122, which was used in the IQaudIO DAC + , provides balanced output, better signal-to-noise ratio and THD. The module is equipped with two RCA connectors, a mini jack connector and supports balanced / differential output for XLR . The communication overlay uses the I2S interface to reduce the load on the Raspberry Pi processor. The IQaudIO has been taken over by the Raspberry Pi foundation, providing ongoing support to Raspberry Pi users.
IQaudIO DAC Pro Shield for Raspberry Pi.The sale is for the overlay, the Raspberry Pi minicomputer can be purchased separately.
Raspberry Pi DAC Pro sound card.The DAC Pro is equipped with a headphone amplifier, the volume is software-controlled and shared with the line output. The XLR connector in the form of goldpin connectors allows connection to studio equipment or speakers powered by a longer cable.
The board has soldered goldpin pins, allowing you to connect additional accessories to the Raspberry Pi GPIO.
The drivers required for the sound card to work properly are built into Linux, including Raspberry Pi OS.
Key Features of the Raspberry Pi DAC Pro Shield
- HAT compliant
- Full HD 24-bit/192kHz audio support
- Integrated volume control (ALSA)
- Built-in high-quality headphone amplifier (TI TPA6133A)
- High-quality sound: SNR 114 db and THD -94 db
- Burr Brown 32-bit/384kHz DAC (TI PCM5242)
- ESD protection
- Communication via I2S interface to reduce the load on the Raspberry Pi processor
- Powered by Raspberry Pi, no additional power supply required
- Two Phono/RCA connectors
- JST pins for balanced XLR output (not included)
- Mini DSP
- To connect to AMP+ it is necessary to mount 2x5 pins
Raspberry Pi DAC Pro Kit Contents.
IQaudIO DAC Pro - sound card for Raspberry Pi
The heart of the IQaudIO DAC Pro audio module is the Burr-Brown PCM5242 converter based on a 32-bit bus, operating at a frequency of up to 384 kHz. The entire system is supported by system drivers that are fully compatible with the Linux audio modification system ALSA.
The IQaudIO Pro sound card is very advanced. On board, you will find two top quality RCA connectors, a mini jack socket and an XLR output - a 3-pin P7-P9 connector.
IQaudIO DAC Pro - sound card for Raspberry Pi
IQaudIO DAC Pro - sound card for Raspberry Pi 4B/3B+/3B is one of the best products in this segment. The audio module has been equipped with a lot of useful inputs and outputs.
When connecting to a Raspberry Pi (remember that the card's power supply also powers the main board), additional analog, headphone and differential outputs may be useful. See the technical specifications and order this professional sound card for Raspberry Pi now!
Useful links |
