- On sale!
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
- On sale!
- Promotion
- Reduced price
- Promotion
- On sale!
- Promotion
Step-Up/Step-Down Voltage Regulator S13V15F5 - 5V 1,5A - Pololu 4084
Index: PLL-21021
- Reduced price
- Promotion
MINICOMPUTERS - Strona 4
Loading...
Feather nRF52 Bluefruit LE - compatible with Arduino - Adafruit 3406
The module from a Feather family, based on nRF52832 system, supports Bluetooth LE. Feather is designed for portable projects. It has possibility to charge it with a lipol...
Index: ADA-11667
Index: ADA-11667
Raspberry Pi Zero case - colorful
Translucent, colored case for Raspberry Pi Zero minicomputer with external dimensions of 80 x 38 x 12 mm.
Index: GRL-12340
Index: GRL-12340
1 Wire Pi Zero DS2482 - 1-Wire module for Raspberry Pi
Shield for Raspberry, based on DS2482-100 system, allows you to use the 1-Wire protocol. The module provides conversion to the I2C interface. It has built-in RJ12 connector,...
Index: ABE-11721
Index: ABE-11721
GPIO pin header expander for Raspberry Pi 3/2 / B + with quick couplers - cascade
An expansion board that allows you to easily connect the modules to the GPIO pins on a Raspberry Pi. Board is combined with minicomputer via 40-strip ribbon . It has goldpin...
Index: DNG-11800
Index: DNG-11800
A-Star 32U4 Mini SV - Atmega32u4 module - Pololu 3145
The module is equipped with AVR Atmega32u4 microcontroller with installed bootloader compatible with the environment of Arduino. It is equipped with 26 digital inputs/outputs,...
Index: PLL-12058
Index: PLL-12058
Velleman VMA508 - holder for Arduino and breadboard
Black stand for mounting an Arduino and a breadboard with 400 holes. The module has mounting holes compatible with Arduino Uno.
Index: VEL-13036
Index: VEL-13036
HiFiBerry DAC+ RTC - sound card for Raspberry Pi 4B/3B+/3/2/B+/A+/Zero
Shield, type Hat for Raspberry, version 4B, 3B+, 3B, 2B, A+, B, Zero with RCA connectors. It is used in the device of high-quality, DAC Burr-Brown chip has a resolution of 24...
Index: RHF-12131
Index: RHF-12131
- Reduced price
- Promotion
OLED Shield for Photon Micro - SparkFun DEV-13628
Panel with blue monochrome OLED display-0,66" with a resolution of 64 x 48 px for module Particle Photon. On the board there are industrially soldered goldpin strips, which you...
Index: SPF-11165
Index: SPF-11165
- On sale!
- Promotion
Fan 12V 40x40x10mm for ROCKPro64
Fan with the input voltage of 12 V, current consumption of 0.08 A and dimensions of 40 x 40 x 10 mm. Designed for mounting on heat sinks for ROCKPro64.
Index: PIN-13138
Index: PIN-13138
Bluetooth 5 and WiFi DualBand module for ROCKPro64
The module is based on a system AMPAK AP6256 designed specifically for a minicomputer Pine64 ROCKPro64. It allows Bluetooth 5 communication and Wi-Fi Dual-Band 802.11...
Index: PIN-13233
Index: PIN-13233
Wide Input Shim KIT - power supply module for Raspberry Pi 3-16V
Module in the form of a hat for Raspberry Pi, which allows to supply power to a minicomputer with voltage from 3 V to 16 V. This allows the cooperation of different power...
Index: PIM-12350
Index: PIM-12350
Cytron Robot Combat Controller URC10 ATmega328P + driver engines 24V/10A compatible with Arduino
Dual-channel DC motor driver. The module can control the direction of rotation, start, stop and speed of the DC motors. Continuous current per 10 A channel (temporary 30 A)....
Index: CTN-12414
Index: CTN-12414
Cytron Uno ATmega328 Edu Maker KIT - StarterKIT + module compatible with Arduino
A set of electronic components that will help you get started with the Maker UNO module. The kit includes LEDs, resistors, motor, potentiometer, breadboard, fan, and wires....
Index: CTN-12416
Index: CTN-12416
- Reduced price
- Promotion
Dual channel DC motor driver, I2C interface - HAT for Raspberry Pi - Waveshare 15364
HAT shield for Raspberry Pi 3 / 2 / B+ / Zero / Zero W enabling the control of two DC motors using the I2C interface. It can control simultaneously the two DC motors. A maximum...
Index: WSR-13304
Index: WSR-13304
Mini Black HAT Hack3r seperator - Raspberry Pi extension - already mounted
Mini Black HAT Kack3r is a shield for the Raspberry Pi, it is mounted to the connectors GPIO of the minicomputer from the ribbon 40-pin. The device is used for separating the...
Index: PIM-10629
Index: PIM-10629
- Reduced price
- Promotion
Stand for Raspberry Pi 4B / 3B + / 3B / 2B - transparent
Transparent stand for Raspberry Pi 3 made of ABS material. Board is mounted on the latches without the use of glue which allows for dismantling at any time.
Index: SBC-10976
Index: SBC-10976
- On sale!
- Promotion
RP-O Din 3D - DIN rail mounting for Raspberry Pi Zero - black
Mounted with 3D printing on DIN-rail for Raspberry Pi Zero. It l eaves access to all ports and GPIO pins. External dimensions: 85 x 40 x 14 mm .
Index: GRL-12125
Index: GRL-12125
Power supply 12V/5A - DC plug 5.5x2.1mm for ROCK64 minicomputers
Power adapter with DC connector 5,5/2,1 mm for a series of minicomputers ROCKPro64. The maximum capacity of the current is 5.0 A.
Index: PIN-13231
Index: PIN-13231
LiPo SHIM - power supply extension for Raspberry Pi
LiPo PWM is an extension for Raspberry Pi mounted directly on the GPIO connector of the minicomputer. The device has JST 2.0 mm 2-pin connectors for connecting the...
Index: PIM-10634
Index: PIM-10634
Automation Hat 3x relay + LED - Raspberry Pi extension
The module is working with a Raspberry Pi, it is mounted on the GPIO connectors, designed for home automation. It has 3 relays of 24 V / 2 A, 15 LED indicators, analogue...
Index: PIM-10636
Index: PIM-10636
Qwiic HAT for Raspberry Pi - SparkFun DEV-14459
Shield, type HAT for Raspberry Pi, facilitating the connection of modules SparkFun via connectors Qwiic. The shield connects the I2C bus on the Raspberry Pi with connectors Qwic.
Index: SPF-10664
Index: SPF-10664
DPZ1 - DIN rail mounting for Raspberry Pi Zero
Plastic board for Raspberry Pi Zero designed to be mounted on a DIN rail. It leaves access to all ports and GPIO pins. External dimensions - 78 x 37 x 10 mm.
Index: BRC-10787
Index: BRC-10787
- On sale!
- Promotion
Module with USB connector for Raspberry Pi Zero - SparkFun KIT-14526
Overlay equipped with USB connector for Raspberry Pi Zero. Once the overlay is installed on the device it can be connected directly to a computer or HUB without any...
Index: SPF-10869
Index: SPF-10869
Module with M12 mount lens IMX219 8Mpx - fisheye for Raspberry Pi V2 camera - ArduCam B0180
Module with wide-angle lens (fish eye) for Raspberry Pi V2 camera. It is equipped with IMX219 sensor with 8 Mpx sensor and 1/4" format. The camera's viewing angle is 175° x...
Index: ACM-15749
Index: ACM-15749
