Product description: OLED graphic colour display 0.95'' (B) 96x64px SPI - simple connectors
0.95" OLED colour display with 96 x 64 px resolution. The screen is based on the SSD1331 controller, has a matrix of 65 thousand colors, works with voltages of 3.3 V and 5 V, communicates through SPI.
This version has soldered in simple goldpin connectors, in our offer you will also finda display with angle pins.
|
The manufacturer provides auser guideandlibraries to operate the screen. |
Connection
The module has soldered in simple goldpin connectors - 2.54 mm raster, communicates through SPI interface using four lines. The description of individual outputs is given in the table.
| Pin | Symbol | Description |
|---|---|---|
| 1 | VCC | Supply voltage from 3.3 V to 5.0 V. |
| 2 | GND | The weight of the system. |
| 3 | NC | Leave it unconnected. |
| 4 | DIN | Input data line of the SPI communication interface. |
| 5 | CLK | Clock line of the SPI communication interface. |
| 6 | CS | Selection of the SPI bus device, activated by a low state. |
| 7 | D/C | Selection of the operating mode - low state means command transfer, high - data transfer. |
| 8 | RES | System reset, activated in a low state. |
Display output layout.
Display specification
- Operating voltage: 3.3 V to 5.0 V
- Controller: SSD1331(documentation)
- Communication: SPI
- Display type: OLED
- Diagonal: 0,95"
- Resolution: 96 x 64 px
- Colours: 65 000
- Viewing angle: over 160°
- Operating temperature: -20 °C to 70 °C
- Soldering goldpin connectors - raster 2.54 mm
- Dimensions: 37 x 32 mm
Useful links |
