Dimafix printing adhesive - spray 400ml

Index: DIM-17938 EAN: 8436556020018

A product that improves the adhesion of 3D prints to the glass surface of the printing table. Designed for FFF/FDM printers. Dimafix significantly facilitates work with almost all thermoplastic materials. Its action depends on the temperature of the surface on which it is applied. It activates the adhesive properties after exceeding 50°C. The product is sprayed in a 400 ml can.

Dimafix printing adhesive - spray 400ml
€14.00
€11.38 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: Dimafix

Product description: Dimafix printing glue - 400 ml spray

A product thatimproves the adhesion of3D prints to the glass surface of the printing table. Designed for printers using FFF/FDM technology. Dimafix significantly facilitates work with almost all thermoplastic materials. Its use is recommended especially when working with high shrinkage filaments,more exposed to undesirable warping. The effect of Dimafix depends on the temperature of the surface on which it is applied. Its adhesive properties become active when it exceeds 50°C. They disappear when the temperature is reduced to between 40°Cand50°C. The product is sprayed in a400 mlcan with a ball to prevent nozzle clogging. It ensures easy even spraying on the hotbed surface. One pack is sufficient for approx. 100 applications.

Video showing how to use Dimafix.

Four action zones

Dimafix protects againstunwanted tearing of the model from theprintingtable, even for the most demanding filaments. It can be used withABS, PVA, Filaflex,Polyprylene, HIPS, among others. Adhesive properties of the product vary depending on temperature. On the example of ABS thermoplastic we can distinguish four thermal ranges of Dimafix:

  • Zone IV- temperaturefrom 95°C to 120°C.Maximum adhesion of the printed component, any size and shape. This range provides an improvement in printing quality of sharp edges and tops of the 3D model.
  • Zone III- temperaturefrom 75°C to 95°C.Zone of high adhesion of the print. 3D model can have any shape and maximum size of 200 x 200 mm. Good print quality without curling even when print cooling is on.
  • Zone II- temperaturefrom 65°C to 75°C. Averageadhesion power suitable for straight components without sharp edges.
  • Zone I- Temperaturebelow 65°C.For easy exit of the printout from the table. If the table cools down, the printout should exit by itself.

Klej do druku Dimafix - spray 400ml

Graph of temperature dependence of adhesion properties (for ABS).

Directions for use

  • Shake the container before use
  • The preparation should be applied at a distance of approx. 30 cm from the surface of the printer table. The manufacturer recommends to perform this operation in ventilated rooms.
  • The hotbed on which Dimafix is applied should have a temperature of about 50°C
  • Remains of the preparation from the surface can be removed with clean water

Klej do druku Dimafix - spray 400ml

Dimafix printing glue - 400 ml spray.

In our offer there is also Dimafix Pen with 90 ml capacity.

Capacity 400 ml
Package width 6.5 cm
Package height 19.5 cm
Package depth 6.5 cm
Package weight 0.382 kg

Be the first to ask a question about this product!

Product reviews

Dimafix printing adhesive - spray 400ml

4.9/5

Average grade

43

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Zdjęcia użytkowników

Customers who bought this product also bought:

Products from the same category: