- New
Product description: Rosa3D Refill PCTG filament 1.75 mm 1 kg - Black
Rosa3D 's Refill PCTG filament in black is a high-quality 3D printing material, an improved alternative to classic PETG . It is characterized by greater impact resistance, higher temperature resistance, and improved base material transparency . Thanks to excellent layer adhesion and low shrinkage, the filament ensures a stable printing process, even on open 3D printers. The Refill version helps reduce waste and lower operating costs. The filament's diameter is 1.75 mm and the material weighs 1 kg . The filament is equipped with an NFC TigerTag , which allows for quick reading of key material parameters using a smartphone. This gives you instant access to information such as printing temperatures, material type, and recommended settings.
Rosa3D Refill PCTG filament 1.75 mm 1 kg - Black.
Filament Refill in black.
PCTG filament properties
- High impact strength : provides very high resistance to impacts and mechanical damage
- Better thermal resistance : the material remains stable up to approximately 76°C
- Chemical resistance : allows use in environments exposed to chemicals
- Flexibility: reduces the risk of cracking and brittle prints
- Very good adhesion of layers : ensures high structural strength of models
- Low shrinkage : reduces deformation and detachment of prints from the bed
- High transparency of the base material : allows for aesthetic and semi-transparent effects (depending on the color)
- Ease of printing : the material does not require a closed chamber (although it is recommended for better results)
Suggested filament printing parameters
| Head temperature | From 240°C to 270°C |
| Table temperature | From 60°C to 80°C |
| Print cooling | From 0% to 60% |
Due to differences in printer design, the above data should be treated as guidelines and the appropriate values should be determined experimentally. |
| Technical specifications of PCTG filament | |
|---|---|
| Filament type | PCTG |
| Color | Black |
| Filament diameter | 1.75 mm |
| Dimensional tolerance | +/- 0.05 mm |
| Thermal resistance | 76°C |
| Density | 1.24 g/ cm3 |
| Spool | Refill |
| Mass | 1 kg |
