Product description: Water cooling set for the Sprite Extruder Pro Creality Watercooling CR-W01 extruder
Water cooling set for the Sprite Extruder Pro extruder, which is used, among others, in in the following models of Creality 3D printers: Ender-3 S1 PRO and CR-10 Smart PRO . The package of elements enables the creation of a system of effective heat dissipation generated during the operation of the hotend head. An efficient liquid circulation system, in accordance with the manufacturer's declaration, allows to reduce the temperature from 10 ° C to 15 ° C. It is approximately 15% - 20% more efficient than traditional fan air cooling.
Effective liquid cooling
Water cooling is more effective than the fan traditionally used in 3D printers by up to about 20%. Effective cooling of the heating block, effectively prevent the clogging of the nozzle. It makes filament feeding smoother, which improves the final printing results.
Noise reduction during operation
The Creality Watercooling Kit uses a low-noise, high-performance pump. The component absorbs shocks while improving the circulation of the coolant. During operation, it does not generate excessive noise (below 45 dB, audible at a horizontal distance of 1 meter).
Made for demanding filaments
Creality Watercooling's aluminum flow element with precision flow channel design accelerates internal coolant circulation and improves heat transfer efficiency. It is a solution suitable for filaments with a high melting point, such as ABS, PETG, etc. Thanks to it, the hotend dissipates heat faster while maintaining a constant operating temperature. Smooth filament feeding allows for the formation of higher-quality 3D prints.
High-quality liquid distribution elements
A high-quality silicone tube that flows through the liquid reduces water evaporation. It is flexible and shows increased bending strength. It is characterized by resistance to high temperatures and acid-base influence. It also has a long service life.
Creality Watercooling Specification
- Model designation: CR-W01
- Working voltage: 12V DC
- Current efficiency: 0.3 A
- Power: 3.1 W
- Flow: 1.53 l / hour
- Capacity: 125 ml
- Working temperature: 0 ° C to 50 ° C
- Cooling block material: aluminum
- Cooling block dimensions: 62 x 20 x 17 mm
- Noise level during operation: less than 45 dB (at a distance of 1 m)
- Product dimensions: 191 x 63 x 63 mm
- Water pump - 1 pc.
- Clamps - 2 pcs.
- Cooling block - 1 pc.
- Liquid distributing tube - 1 pc.
- M3x16 screw - 2 pcs.
- Screw M2x12 - 2 pcs.
- T nut - 2 pcs.
- Power supply - 1 pc.