Product description: RB-33D Universal meter Rebel
Simpleuniversal meterallows you to make basic measurements. Allows you to measure: DC voltage, AC voltage and resistance. The device is also equipped with continuity tester anddiodetester functions. The meter has an additional connector that serves as a generator output with a frequency of50 Hz, amplitude of5 Vand impedance of50 kΩ. The measuring ranges of the meter are setmanuallyusing the knob located in the center of themultimeter.
Measuring probes that fit the meter are included.
A 9 V battery used to power the meter is included.
Main functions of the meter
All measurements performed with the meter are displayed on theLCDwith backlight. The backlight is activated using the physical button located on the right side. A lowbatterywarning is also displayed on the screen. The maximum measurement that can be displayed on the screen is1999. The product is also equipped with an automatic polarity detection function, its reversal is signalled by a"-"sign displayed in front of the measured parameter. Themultimeteralso has a function that allows you to stop the measurement, calledData Hold. This function is called by a physical button located on the left side.
Technical specification
| Parameter | Range |
|---|---|
| DC voltage | 200 mV / 2000 mV / 20 V / 200 V / 500 V |
| AC voltage | 200 V / 500 V |
| DC DC current | 2000 µA / 20 mA / 200 mA / 10 A |
| AC alternating current | no |
| Resistance | 200 Ω / 2000 Ω / 20 kOhm / 200 kΩ / 20 MΩ / 200 MΩ |
| Capacitance | no |
| Inductance | no |
| Frequency | no |
| Temperature | no |
| Automatic range selection | no |
| Standby mode | no |
| Sounder | no |
| Transistor tester | no |
| Diode tester | yes |
| Battery tester | no |
| Data Hold function | yes |
| Battery indicator | yes |
| Backlight | yes |
| Display | LCD 1999 (47 x 15 mm) |
| Dimensions | 133 x 75 x 37 mm |
| Power supply | 9 V battery (included) |
| Weight | 166 g |
