- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
ELECTRONICS - Strona 225
Loading...
MQ-135 alcohol, benzine, ammonia sensor - semiconductor
Module with sensor MQ-135 detecting benzene, alcohol and smoke . It is powered with the voltage from 2.5 V to 5 V. It has digital and analog output, making it compatible with...
Index: MOD-08243
Index: MOD-08243
Magnetic Encoder Disc for 20D mm Metal Gearmotors, OD 9.7 mm, ID 2.0 mm, 20 CPR (Bulk) - Pololu 3498
Five magnetic disks that are used with quadrature encoders designed for installation in 20D mm motors from Pololu. They help achieve up to 20 impulses per revolution. Outer...
Index: PLL-08257
Index: PLL-08257
Magnetic Encoder Pair Kit for 20D mm Metal Gearmotors, 20 CPR, 2.7-18V - Pololu 3499
A pair of magnetic quadrature sensors, designed for installation in 20D motors from Pololu. It consists of a board with the Hall sensor and the plastic impeller with magnets,...
Index: PLL-08258
Index: PLL-08258
Index: LED-08297
Grove - UV sensor - analog module
UV sensor with voltage supply from 3.3 V to 5 V. Output analog voltage, proportional to the intensity of UV radiation. The sensor can be used to detect harmful solar radiation.
Index: SEE-08307
Index: SEE-08307
Matrix 64x32 - 2048 LED RGB individually addressed
The matrix is composed of 2048 individually addressed RGB LEDs arranged in 32 rows and 64 columns. Each pixel may emit a color from 24-bit palette. Fot the module's controly...
Index: DFR-08363
Index: DFR-08363
ON-OFF Switch ASW-14D with LED, 12V/20A - blue
Switch with lever for printing, equipped with 3 contacts with a load capacity of 20 A and 12 V. Pins pitch is 6.5 mm, total height is 43 mm. The switch has a built-in...
Index: UCC-08388
Index: UCC-08388
Switch ON-OFF KN3(C)-101 250V/6A
Lever print switch equipped with 2 contacts, load capacity 6 A / 250 V or 10 A / 125 V. Leads raster is 25 mm, total height 45 mm.
Index: UCC-08392
Index: UCC-08392
Switch ON-OFF KN3(C)-201 250V/6A
A printable lever switch equipped with 4 contacts, rated 6 A / 250 V or 10 A / 125 V. It enables switching on two devices simultaneously. Leads raster is 25 mm, total height...
Index: UCC-08393
Index: UCC-08393
RJ45 8P8C case - gray - 10pcs.
Full rubber bend for RJ45 plugs (8P8C) in grey colour. Price for 10 pieces.
Index: KAB-08396
Index: KAB-08396
Angled DC adapter 5.5/2.1mm - angular
The angled adapter making possible the connection of the cable to the 5.5 / 2.1 mm tip everywhere, where the straight adapter just doesn't fit. It can be used as a power source...
Index: SWT-08431
Index: SWT-08431
The magnet is horseshoe shaped with a size of 59 x 49 x 9 mm. It helps, for example, capture small screws.
Index: MAG-08496
Index: MAG-08496
Socket 1x5pin - 2,54mm - long - 10pcs.
A 5-pin connector for easy solderability to the PCB. Used e.g. for connecting male wires. Raster is equal to 2.54 mm. It has extended pins with a length of 10.5 mm.
Index: UCC-08509
Index: UCC-08509
Literal markers for cable 4mm - 1300pcs
Set for marking wires with a diameter of 4 mm. Contains 50 pieces of markers with letters from A to Z in orange.
Index: KAB-08521
Index: KAB-08521
USB-MicroUSB cable - fabric braided - 1,5m
Cable USB (type A) - microUSB (B type) used to connect computer with devices equipped with a microUSB-B. Length: 1,5 m
Index: KAB-08552
Index: KAB-08552
Bluetooth v4.0 module. It works with voltage from 3.3 V to 5 V, it communicates over a serial UART interface (RX, TX pins), it supports the AT command. Maximum transmitter...
Index: MOD-08591
Index: MOD-08591
Flashing light LED 12 V magnetic - orange
Flashing lamp commonly used in automatic gate. The device instantly attracts attention, providing a high level of security . Works like a strobe light with a frequency of...
Index: SES-08711
Index: SES-08711
Flashing light HC-05 - LED 12V - orange
A signal lamp popular in gate automation. The device instantly strikes the eye providing a high level of security. It works as a stroboscope with a frequency of approx. 500 /...
Index: SES-08714
Index: SES-08714
Step-Up/Step-Down Voltage Regulator S9V11F5 - 5V 1,5A - Pololu 2836
Miniature boost converter module supplied with voltage from 2 V to 16 V. The output voltage is set to 5 V. Maximum current 1,5 A. Dimensions: 8 x 12 x 4 mm.
Index: PLL-08738
Index: PLL-08738
ON-OFF momentary switch PBS-28B 250V / 2A - silver
Temporary, round switch with a loading capacity of contacts: 2 A for 250 V.
Index: NSZ-08824
Index: NSZ-08824
Slide switch 2A / 250V - 2 position
Through slide switch with the size of 60 x 20 x 11 mm. The load capacity of the contacts is 250 V and 2 A.
Index: NSZ-08825
Index: NSZ-08825
ON-OFF-ON KN3 (B) -223 250V / 6A toggle switch - monostable
Switch with lever for printing, equipped with 6 contacts with the load of 6 A / 250 V or 10 A / 125 V. It enables the activation of two devices at the same time . Pins...
Index: NSZ-08828
Index: NSZ-08828
Adapter facilitates the installation of the ESP-32S module on the breadboard. The set includes the goldpin connectors, 2.54 mm pitch for self-soldering and two buttons.
Index: MOD-08894
Index: MOD-08894
LED indicator 12V DC - 8mm - red
LED light, working voltage 12 V DC. It has a diameter of 8 mm.
Index: LED-08984
Index: LED-08984