- Reduced price
- Sale
Analog time programmer TS-WF1 - with Schuko socket - Kemot URZ2001-5
Index: LEC-24140
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
Power supply - Strona 14
Loading...
LiPo Amigo PRO - charging module for Li-Pol and Li-Ion batteries via USB C - Pimoroni PIM612
Pimoroni's Amigo Pro LiPo charging module with built-in MCP73831 chip. It is designed for charging Li-Pol and Li-Ion batteries with a nominal voltage of 3.7 V.
Index: PIM-21835
Index: PIM-21835
Power supply GLP GPV-18-12 for LED strip 12V / 1,5A / 18W - waterproof
GLP branded switch mode power supply, designed to power LED strips and strips. The power supply has an IP67 protection class and operates in temperatures from -30°C to 70°C....
Index: WAK-15671
Index: WAK-15671
Power strip Lanberg with switch black - 4 sockets - 1,5m
Lanberg power strip black. Equipped with an on/off switch and additional surge protection, protection against children. It has 4 sockets and a 1.5 m cord.
Index: IMP-14575
Index: IMP-14575
MW Power ER24W24V 24V/1A switching power supply - DC 5.5/2.1mm plug
ER24W24V Switch Mode Power Supply delivers 24 V DC to devices with a 5.5 mm / 2.1 mm DC socket. The current capacity of the module is 1 A and the nominal power is 24...
Index: WAK-19138
Index: WAK-19138
Mean Well LRS-100-5 power supply - 5V/18A/90W
Power supply Mean Well power 90W. Input voltage from 85 V to 264 V AC and 125 to 373 V DC. The output voltage is 5 V. Output current up to 18 A.
Index: ZAS-06023
Index: ZAS-06023
Power supply POS-35-5-C2 - 5V/7A/35W
Mounting power supply unit, 35 W . Input voltage from 100 V to 240 V AC . Output voltage is 5 V . Output current up to 7 A .
Index: WAK-12245
Index: WAK-12245
Water generator with 5.0 volt output at 4/min flow rate. Threads are 1/2," works with pressures up to 1.0 MPa. The maximum output current is 150 mA. Battery not included.
Index: DFR-09537
Index: DFR-09537
DFRobot DFR0580 - Solar Power Manager For 12V Lead-Acid Battery
Module designed for renewable energy and IoT projects. It has 5 power leads - ARK 12 V for charging lead acid batteries, ARK 12 V, ARK 5 V and 2 USB with 5 V. It works with...
Index: DFR-13313
Index: DFR-13313
SATA power cable - SATA - 50cm
Male-male SATA connectors cable allowing you to connect a hard disk or CD-ROM to the motherboard of the computer. Cable length is 50 cm. Suitable for connector of Banana Pi.
Index: KAB-05228
Index: KAB-05228
Laboratory power supply LongWei LW-3010E 0-30V 10A
Programmable laboratory power supply unit allowing regulation of voltage within the range from 0 V to 30 V and current within the range from 0 A to 10 A . The device has an...
Index: JBW-19290
Index: JBW-19290
Power supply MW Power EA 10202D3 12V/2A - DC plug 5,5/2,1mm
The EA 10202D3 Switch Mode Power Supply EA 10202D3 by MW Power is designed to supply electricity to devices with a socket DC 5.5 / 2.1 mm . The output of the power supply...
Index: WAK-15681
Index: WAK-15681
Laboratory power supply Zhaoxin RPS-305D 30V 5A
Stabilized laboratory power supply unit with stepless voltage adjustment from 0 to 30 V and current adjustment from 0 to 5 A. It has two operating modes: constant output...
Index: LUT-08761
Index: LUT-08761
Power supply MDIN60W12 for DIN rail - 12V / 5A / 60W
DIN rail mounted power supply. Input voltage: 100 V to 240 V AC. Output voltage is 12 V. Output current is 5 A. Rated power is 60 W.
Index: WAK-11426
Index: WAK-11426
Solar cell with 3 W output voltage of 6 V in a plastic protective frame. Dimensions of the module are: 255 x 145 x 9 mm.
Index: AKU-06990
Index: AKU-06990
Power supply MDIN100W24 for DIN rail - 24V / 4A / 100W
Switch-over power supply designed for mounting on a DIN rail. The input voltage of the power supply is from 100 V to 240 V AC. The output voltage is 24 V. The output current is...
Index: WAK-15796
Index: WAK-15796
LC709203F - LiPoly / LiIon Fuel Gauge and Battery Monitor - STEMMA QT / Qwiic - Adafruit 4712
Battery level indicator from Adafruit. It allows to measure the voltage of Li-Pol and Li-Ion batteries. Displays the voltage value and percentage charge of the cell. The...
Index: ADA-18235
Index: ADA-18235
Li-Pol / Li-Ion battery charge meter - MAX17048 - STEMMA JST PH & QT / Qwiic - Adafruit 5580
Compact meter based on the MAX17048 chip , which allows you to monitor the charge level of single-target Li-Pol and Li-Ion packets with a voltage ranging from 3.7 V to...
Index: ADA-21997
Index: ADA-21997
Power supply MDIN20W24 for DIN rail - 24V / 1A / 20W
DIN rail mounted power supply unit. Input voltage from 90 V to 264 V AC. Output voltage is 24 V . The output current is 1 A. The rated power is 20 W.
Index: WAK-11425
Index: WAK-11425
Power supply MW Power EBD2412 12V/2A - DC plug 5,5/2,1mm
The MW Power EBD2412 switching power supply is designed to supply electricity to LED lighting , but also to some electrical devices that have a 5.5 / 2.1 mm DC socket ....
Index: WAK-15686
Index: WAK-15686
Zasilacz laboratoryjny LongWei PDS-3010G 30V 10A
The PDS-3010G laboratory switching power supply from LongWei is a precise, small-sized device. Equipped with clear four-digit LED displays , it allows convenient...
Index: JBW-24126
Index: JBW-24126
Power supply Mean Well MDR-20-12 for DIN rail - 12V / 1,67A / 20W
DIN rail mounted power supply unit. Input voltage: up to 85 V to 264 V AC or 120 V to 370 V DC . Output voltage is 12 V . Output current up to 1.67 A .
Index: ZAS-12242
Index: ZAS-12242
Power supply GLP GPV-50-12 for LED strip 12V/4A/48W
Global Leader Power's GPV-50-12 fixed voltage power supply for LED lighting, with IP67 protection. The output voltage is 12 V and allows the connection of LED lighting up...
Index: WAK-15674
Index: WAK-15674
Power supply for LED Akyga 11-15V / 12.5A / 150W
150 W power supply designed to supply lighting based on LED technology, e.g. tapes, bulbs, panels, RGB controllers and other DC-powered devices from 11 V to 15 V. The voltage...
Index: RCO-12862
Index: RCO-12862
LiPo Charger/Booster - Li-Pol charger - 5V/1A - PAM2401 - SparkFun PRT-14411
Charger for 1-cell lithium polymer batteries with a nominal voltage of 3.7 V. The supply voltage is 5 V, the maximum current is 500 mAh. The device has a 5 V 1 A booster. The...
Index: SPF-10105
Index: SPF-10105