Soldering is the most important step in the assembling of electronic devices. Of done February must have smoothness, Shine and durability, so how does this affect the correctness and reliability of the installed equipment. Outside the same skill with a soldering iron, important proper selection of the binder rations, but also auxiliary equipment and accessories. In order to obtain the best soldering results, the correct selection of the grotto soldering iron of suitable size and shape.
Set of copper tips for soldering stations - Copper series 900M - 10pcs
Set of copper soldering tips for soldering station series Copper, work with stations: 936, 937, 803, 738, 995da+, etc.
Soldering tip for station type 79-3111 ZD99
Soldering station tip type 79-3111, works with stations such as: ZD99, SL98, etc.
Tip for soldering station type 79-3121 ZD99
Tip for soldering station type 79-3121, cooperates with, among others, stations: ZD99, SL98, etc.
Set of tips for soldering stations - 900M series - 10 pcs.
A set of soldering tips for soldering station from series Black T, works i.a. with stations: 936, 937, 803, 738, 995da+, etc.
Soldering tip - type T-2CF HQ - Black
Blade for soldering stations Black type 900M T-2CF HQ series, works with stations, among others: 936, 937, 803, 968, 995 etc.
Soldering iron tip - bevel type T-2CF
Bevel tip for soldering station type T-2CF, it works, among others, with stations: 936, 937, 803, 968, 995 etc.
Soldering tip for soldering station type C1-3 79-3131 ZD99
Soldering tip for solder station type 79-3141 cooperates, among others, with stations: ZD99, SL98, etc.
Soldering tip for soldering station - bevel type 900M T-1.2D
Soldering station tip bevelled type 900M T-1,2D , works with stations such as: 936, 937, 803, 968, 909 etc.
Soldering tip for soldering station type N1-46 - 2 ZD929C / ZD937
Soldering tip for solder station type N1-46 2 mm, cooperates, among others, with stations: ZD929C, ZD931.
Black type 900M-T-1C - for Zhaoxin / Aoyue / PT / WEP / Yihua soldering stations
Black type 900M T-1C soldering station tip. Black type soldering tips have additional protection on the surface, thanks to which they are more resistant to oxidation, i.e....
Q-T-B soldering tip for Quick soldering stations - 960-B series
The QTB 960-B series tip for Quick soldering stations is characterized by high quality workmanship and universal use. The conical shape with a contact diameter of 0.5 mm...
Set of 4 soldering tips for Pinecil soldering irons - Fine type TS series - Pine64 TIPK2
Set of four precision soldering tips Pinecil , compatible with TS100. Tips with a length of 105 mm to 107 mm and a resistance of about 8 Ω , guarantee high soldering...
Q-T-2C tip for Quick soldering stations - 960 series-2C
QT-2C tip with a 45º beveled end and a diameter of 2 mm , designed for Quick soldering stations. Perfect for soldering small through-hole components and SMD elements....
Q-T-0.8D fip for Quick soldering stations - 960-0.8D series
QT-0.8D chisel tip for Quick soldering stations. Ensures precise soldering thanks to a 0.8 mm diameter tip. The length of the tip itself is 17 mm . Ideal for work...
Tip for soldering station Elwik - conical GD-1/047
Conical tip from series GD-1, suitable for soldering station Elwik.
Soldering tip for soldering station - series Black type 900M -T-1C
Tip for soldering station series Black type 900M-T-1C, it cooperates, among others, with stations: 936D, 898D, 852, 936, 738, etc.
Soldering tip for soldering station type C1-4 79-3141 ZD99
Soldering tip for solder station type 79-3141 cooperates, among others, with stations: ZD99, SL98, etc.
Tip for soldering stations - type C1-1
Soldering tip . Fits to the following models of soldering stations: ZD-98, ZD-99.The soldering tip has a universal soldering contact tip.
Q-T-1C tip for Quick soldering stations - 960 series-1C
QT-1 tip dedicated to Quick soldering stations . The conical shape with a 45º cut end and a contact diameter of 1 mm makes the tip ideal for soldering small through-hole...
Soldering station tip - series Black type T-1CF HQ
Tip for soldering station from series Black type 900M-T-1CF HQ, cooperating, among others, with stations: 936, 937, 803, 968, 995, etc. The Black Series is more durable than...
Soldering tip for soldering station Elwik - cut on one side GD-3/055
One side cut off tip from GD-3 series to fit Elwik soldering stations.
Soldering tip - type 900M T-0.8D
Tip for soldering station bevel type 900M-T-0,8 D, works, among others, with stations: 936, 937, 803, 968, 909 etc.
Soldering tip - type 900M T-2.4D
Tip for soldering station bevel type 900M-T-2.4 D, it works, among others, with stations: 936, 937, 803, 968, 909 etc.See also
The purpose of the soldering tip is to transfer heat from the soldering iron to the area to be soldered. In simple terms, it is best to choose a tip that will allow you to deliver high enough temperature in the shortest amount of time to complete the soldering in the shortest time possible without exposing the PCB and the components on it to damage due to too much heat over time.
In real conditions, you can often deal with very small elements on PCBs, where the use of a large soldering tip is very troublesome - in this case, it is worth paying attention to its geometry. A tip cut on one side at an angle of 45 or 60 degrees significantly facilitates access to the tightest places in electrical circuits, but conical tips and rounded tips will also be helpful when soldering in small areas. The truncated cone shape of the tip is one of the most popular among professionals and DIY enthusiasts.
When soldering electromagnetic screens and disassembling electronic components, a sharp tip will be helpful, as its sharp edge allows access to areas where a large, traditional soldering tip cannot be used. When soldering surface-mounted components (SMD), it is best to use a mini-wave tip, the shape of which makes it easier to solder multiple pads (in the case of e.g. SMD integrated circuits) with a single pass of the solder, and also enables the removal of excess solder causing undesirable short circuits between the soldering points. If a large number of short circuits occurred during assembly, it is best to use a non-wettable needle tip with a reduced tendency to stick to the soldered surfaces.
One of the factors affecting the life of the tip is the use of high-quality solder . Low-quality solder may contain impurities that, when deposited on the surface of the soldering tip, may worsen its thermal conductivity and make the soldering process more difficult. A good soldering filler should melt within a short time of applying a heated tip to it. For example, containing 60% tin and 40% lead (see also: Tins and solder pastes), it should melt easily at a temperature of 240°C. When metals come into contact with air, they may oxidize, and this also applies to soldering tips. To prevent this, use fluxes, wet sponges and brass cleaners to clean soldering residue. Our offer includes tips for heater soldering irons, transformer soldering irons and gas soldering irons. We also offer a set of arrowheads containing a different number and type of arrowheads.
The tip is a special metal working tip that enables effective heat transfer to the soldered elements. In the case of soldering irons, it most often takes the form of an elongated cone with a mounting sleeve, and if we are dealing with a transformer soldering iron, the tip is made of an appropriately formed copper wire.
In the case of popular soldering irons, we have a wide selection of tips in various shapes and sizes. The general rule is that the tip size of the tip should correspond to the dimensions of the elements to be soldered - tips with a diameter of about 1.0..1.5 mm are usually suitable for assembling THT technology boards, while small SMD components require sharp cones of about 0. 5mm.
