SENSORS - Strona 9
Cytron Maker Reflect - Analog IR reflectance sensor
Maker Reflect is a small reflective sensor equipped with an IR diode that sends out an infrared light beam, which returns to the sensor after reflection from the surface and...Grove - a set of 5 female-female 4-pin - 2mm/20cm cables without latch
A set of five 4-pin cables Grove, raster 2 mm. They are used to connect Grove sensors with Base Shield Board. Cable length is 20cm. Version without a latch.Photoresistor analog - Iduino SE012
Module with photoresistor for Arduino. It is controlled via an analog signal, powered with the voltage from 3.3 V to 5 V.Distance sensor, reflective - receiver + transmiter IR - 3.3V / 5V - 40cm - Iduino ST1081
The reflective module with a transmitter and an infrared receiver, equipped with a digital output. It works with a voltage from 3.3 V to 5 V. It enables the detection of...BMA220 3-axis I2C digital accelerator - DFRobot module
Sensor for measuring acceleration in three axes in the range: ± 2 g, ±4 g, ±8 g / ±16 g. Powered with the voltage of 2.0 V to 3.6 V, it is characterized by small size, low...Laser sensor of dust /particle concentration PM2.5 - PMS5003
The sensor measures the coefficient of PM2.5, that is, the number of so-called dust suspended in the air. They are contaminants which are harmful to the environment and human...Alcohol sensor MQ-3 - semiconductor - blue module
Module with the alcohol sensor MQ-3 with the goldpin pins, pitch of 2.54 mm. It is powered with the voltage of 5 V. It has digital and analog output, making it compatible with...High temperatura probe PT100 - 3x30mm with wires
Analog sensor of high temperature operating in the range from -200 °C to 450 °C. The output is the resistance depending on temperature. The probe's length is 30 mm.Maker Soil Moisture - capacitive soil moisture sensor
Cytron Maker Soil Moisture sensor is a sensor that can measure soil water content and connect with various microcontrollers. The sensor has an analog output in the form of a...Limit switch with lever - WK611 - 5pcs.
Limit switch with lever with the length of 25 mm. Maximum operating parameters: voltage of 250 V and current of 5 A.Liquid flow sensor YF-S201 30l/min - thread 3/4 ''
Sensor of liquid flow operating in the range from 0 to 30 liters per minute. Is supplied with the voltage from 3.5 V to 24 V, the output signal is a frequency proportional to...Color sensor, light transducer - frequency TCS3200D - module Iduino ME069
Module with color sensor enables a measurement of the RGB components, the output is the frequency which depends on the intensity of light of the selected color. It i s...BleBox tempSensorAC v2 - WiFi temperature sensor, 230VAC - up to 4 temperature probes
Sensor for temperature measurement from -55°C to 125°C , allows to connect up to 4 temperature probes. Module communicates using wireless WiFi communication based on μWiFi...Tensometric beam NA27 5kg (50N)
Strain-gauge beam operating in the range of up to 5 kg (approx. 50 N). The smallest version is used, for example, in kitchen scales, portable scales. The connecting cable...Water level sensor - 10W float reed switch - 92mm
The sensor allows you to control the water level in the tank. It consists of a float which under the influence of increasing the fluid volume, rises, causing a short circuit of...Laser distance sensor Lidar TFMini Plus UART / I2C - 12m
Precise, laser distance sensor operating in the range from 0.1 to 12 m with an accuracy of 0,05 m. The supply voltage is 5 V. The device communicates using the UART and I2C...Reed switch normally - plastic 14,5mm
Reed contact in plastic straight housing, 14.5 mm long.DFRobot Gravity - pH analog sensor/meter
Analog pH meter with an analgue output. Allows to measure water quality. It has an accuracy of +/- 0.1 pH, which is sufficient for most applications. Equipped with LED, BNC...DFRobot Gravity: Analog AC Current Sensor SCT 013-020 - to 20A
The sensor measures the intensity of the current flowing in a pipeline without its opening. Measurement occurs through the insulation on a single wire, and the output is the...Waterproof probe with temperature sensor DS18B20 - 2m - brown - silicone
Waterproof probe is equipped with a digital thermometer DS18B20 with cable with the length of 2 meters. Version with silicone wire is characterized by the greater strength.Tilt/shock sensor - Waveshare 9536
The tilt sensor detects changes in position. It can work as a shock sensor. It works with voltages from 3 V to 5.5 V.CO sensors tester - spray 400ml
The preparation is designed for testing the carbon monoxide and smoke detectors. It enables the testing of the correctness of operation of the CO detector. Capacity: 400 ml.Pressure sensor cell 50kg - 4pcs.
Pressure sensor reduces its resistance when the force put to the square tip, increases. The sensor is in the form of a rectangle with sides of 33 mm. The set has 4 pieces,...