SENSORS - Strona 10
MAX31856 Breakout - Universal Thermocouple Amplifier - Adafruit 3263
Module with thermocouple amplifier MAX31856 communicating via the 4-pin SPI interface. Works with thermocouples of type K, J, N, R, S, T, E and B. Works with a supply voltage...Distance sensor, reflective 3,3V/5V - Iduino ST1140
The module is equipped with IR reflective sensor equipped with digital output. It works with a supply voltage from 3.3 V to 5 V. It is applied in the robots tracking the line.Inductive proximity sensor LJ18A3-8-Z / BY 8mm 6-36V
Inductive, digital proximity sensor with a cable with the length of 100 cm and nuts to facilitate mounting. It detects metal at a distance of up to 8 mm. The object detection...Sonoff SNZB-06P - intelligent human presence detector - ZigBee - Android/iOS application
Sonoff SNZB-06P is an advanced human presence sensor that uses 5.8 GHz microwave technology to detect movement and constant presence in the room. By integrating with the...Tensometric beam NA27 1kg (10N)
Strain-gauge beam operating in the range of up to 1 kg (approx. 10 N). The smallest version is used, for example, in kitchen scales, portable scales. The connecting cable has...Force sensor round 15mm - short connector - Pololu 2728
Pressure sensor reduces its resistance when the force put to the round tip, increases. The s ensor with the short connector, round, with about 15mm diameter.DFRobot Gravity - analog sensor of ambient light
Analog ambient light sensor PT550 compatible with Arduino and Raspberry Pi. The sensor allows to determine the light density and reflects the analog voltage signal back to...Grove - mini PIR motion sensor
The motion sensor, type PIR with the interface compatible with the Grove series. The object detection is indicated digitally - through the high status on SIG pin. The range of...Waterproof probe with temperature sensor DS18B20 - Okystar - 5m
The waterproof probe with DS18B20 digital temperature sensor enclosed in a sealed, waterproof housing, allows temperature measurement in hard-to-reach places or in areas of...Temperature sensor and humidity ZigBee ZTH1 Thuja Smart Life
Small size ZigBee ZTH1 humidity temperature sensor, available in white . It is powered by one 3 V CR2450 battery (supplied). It works with ZigBee 3.0. It measures...Sharp GP2Y0A02YK0F - Analog distance sensor 20-150 cm
Analog distance sensor (rangefinder) Sharp GP2Y0A02YK0F to detect objects in the range from 20 to 150 cm.Zamel Supla MEW-01 - WiFi Energy Monitor - Android / iOS application
The monitor allows you to control power consumption via WiFi network. It is a 3-phase device for easy installation in the electrical switchgear, it also enables measurements...Grove - 10kΩ linear rotary potentiometer - top connector
Potentiometer 10 kOhm with linear rotary. It as a 300° range of rotation. It h as a 4-pin Grove connector on the side of the handle.Grove - precipitation / water sensor
The Grove sensor used to detect the presence of water or its quantity. It is powered with the voltage of 5 V. It can be used to detect the presence, level or absence of water.Waterproof probe with temperature sensor DS18B20 SENT0001 - 1m
Waterproof probe with DS18B20 digital sensor. Designed for temperature measurement in the range from -55°C to +125°C. Measurement accuracy in the temperature range from -10°C...Inductive proximity sensor LJ12A3-2-Z / BY 2mm 6-36V
Inductive, digital proximity sensor with a cable with the length of 100 cm and nuts to facilitate mounting. It detects metal at a distance of up to 2 mm. The object detection...IR beam interruption sensor - LED 5mm - 0-25 cm
The motion detection sensor reacts to the interruption of an infrared light beam that is transmitted between the transmitter and receiver . The devices should be placed...Flame sensor 760-1100nm - analog - Waveshare 9521
The sensor is used to detect fire. It is powered with the voltage from 3.3 V to 5.3 V. The range of the sensed wave: from 760 nm to 1100 nm. The output is an analog voltage...QTR-1A reflectance sensor - 2pcs. - Pololu 2458
Two modules with QTR reflective sensors. They have an analog output. The supply voltage is 5 V.DFRobot Gravity - analogue turbidity sensor
Sensor for testing the quality of water by measuring its turbidity. Operates at 5 volts at temperatures from -30°C to 80°C.RFID / NFC MiFare Classic sticker - 13,56MHz - Adafruit 362
The ID of the RFID /NFC identifier in the form of a sticker, is equipped with NXP S50 chip. Each chip has a unique 32-bit code. The devices work at a small distance from the...Color sensor, light-frequency converter TCS3200 - Waveshare 9520
Module with color sensor that enables a measurement of the RGB components, the output is the frequency depend on the intensity of the selected color. It is supported by any...MQ-135 alcohol, benzine, ammonia sensor - semiconductor
Module with sensor MQ-135 detecting benzene, alcohol and smoke . It is powered with the voltage from 2.5 V to 5 V. It has digital and analog output, making it compatible with...Gravity URM09 - ultrasonic distance sensor 2-500cm sensor analog - DFRobot SEN0307
Module with ultrasonic distance sensor URM09, with measuring range from 2 cm to 500 cm. Supply voltage is 3.3 V to 5.5 V. The measuring frequency can reach up to 30 Hz. It...
