Arduino Uno R3
 - zdjęcie 1
 - zdjęcie 2
 - zdjęcie 3
 - zdjęcie 4
Arduino Uno R3 - zdjęcie 5

Arduino Uno Rev3 - module A000066

Index: ARD-01060 EAN: 8058333490090
BOTLAND B. DERKACZ SPÓŁKA JAWNA Opinie z ekomi-pl.com

The original module from the Arduino® Uno with the AVR microcontroller ATmega328 in an interchangeable housing. It has 32 KB Flash memory, 2 KB RAM, 14 digital I/o of which 6 can be used as PWM channels, 6 analog inputs and popular communication interfaces.

€21.38
€17.38 tax excl.

In stock, shipping 24 hours!
(Check quantity)
Shipping in 24 hours
30-day returns
PayPal payment
Manufacturer: Arduino

Description

Arduino Uno is the main and, at the same time, the most popular edition of the entire series. The Board containsan ATmega328 microcontroller, equipped with 14 digital I/o of which 6 can be used as PWM outputs (e.g. for motor control), and 6 analog inputs. The system works with the signal ticking with the frequency of 16 MHz and has 32 KB Flash memory and 2 KB RAM SRAM.

 

The subject of the sale is the original product of Arduino Uno, Botland isthe official distributor of this company.

Key features

Below are a few features that distinguish modules Arduino Uno compared to other programmable tiles.

 

Name Description

Installed

bootloader

Thanks to installed bootloader, to programme the device, the appropriateUSB cableandsoftware from manufacturer's website is enough .

Arduino

Shield

The distribution of connectors allows the installation of special plates, so-calledArduino Shield.

Digital 

outputs

14 digital inputs/outputs allows, in particular, control of LEDs, relays and reading the buttons' states.

Efficiency of

current

The maximum power load for a single output is 40 mA.

PWM

Outputs

6 PWM outputs allow e. g. motor control and brightness control of the LEDs.

Analog 

inputs

6 inputs of built-in analog-digital converter box with a resolution of 10-bit support, in particular, sensors with analog output.

Serial

Communication

The device supports popular network interfaces, including UART, I2C and SPI.
Special functions Some of the pins have special functions and their brief description is available inour guide.

Built-in

memory

Atmega328 system with a clock signal with a frequency of 16 MHz, has 32K Flash memory, 1 KB EEPROM and 2 KB of RAM SRAM.

Power 

DC connector

To power the Arduino, you can useany power sourcewith a voltage from 7 V to 12 V with DC connector 5.5 x 2.1 mm.

Power

USB port

The tile can be powered from a computer via USB cable, bearing in mind that the maximum power load for the USB port is 500 mA. Arduino has a system that protects the socket from short-circuit and the flow of too large current.

ICSP

Connector

The module has ICSP outputs for connecting an externalAVR programmer.

IOREF

Pin

The IOREF Pin provides direct access to the volatge with which I/O outputs work.

Built-in

led

The connected led on pine 13 allows debugging of simple programs.

Output

3.3 V

Built-in voltage regulator provides power to external devices with the voltage of 3.3 V with current consumption of 50 mA.

Microcontroller

in THT

Thanks to the use of THT case, in case of damagingthe main microcontroller Atmega328Pyou can easily replace it.

 

First run

To help you get started with the module, we have prepareda tutorial that concerns the installation and first run of the Arduino environment.

 

Arduino uno rev3 - moduł, platforma, atmega328, płytka,

The distribution of elements on the Arduino Uno.

 

Specification

  • Supply voltage from 7 V to 12 V
  • Model: Arduino Uno
  • Microcontroller: ATmega328
    • Maximum clock frequency: 16 MHz
    • SRAM: 2 KB
    • Flash memory: 32 KB (5 KB is reserved for bootloader)
    • EEPROM: 1 KB
  • I/O Ports: 14
  • PWM outputs: 6
  • Number of analog inputs: 6 (channels of converter A/C with 10 bit resolution)
  • Serial interfaces: UART, SPI, I2C
  • External interruptions
  • The connected led on pin 13
  • USB A connector for programming
  • DC connector 5.5 x 2.1 mm for power
  • Transparent, self-adhesive stems in kit

ThingSpeak platform for Arduino and Raspberry Pi IoT.

 

Voltage to 7.0 V
Voltage from 12.0 V
Voltage output from 5.0 V
Output voltage to 5.0 V
Nominal output voltage 5.0 V
UC - Microcontroller ATmega328
UC - Core 8-bit AVR
UC - EEPROM 1 kB
UC - Flash 32 kB
UC - RAM 2 kB
UC - core 1. Single Core
UC - Digital pins 14
UC - analog in 6
UC - freq 16 MHz
UC - A/C 10-bit
UC - PWM 6
UC - USB USB B
UC - I2C yes
UC - UART yes
UC - SPI interface yes

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Lichtenstein, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

Customers who bought this product also bought:

Arduino MKR1000 module ABX00011 - Wi-Fi ATSAMW25 - with connectors

The module based on ATSAMW25 Atmel SoC system with wi-fi, designed for IoT projects. Equipped with Cortex-M0. Has 256 KB Flash memory, 32 KB SRAM, 8 digital inputs/outputs, 12...
Index: ARD-10050
Index: ARD-10050
In stock, shipping 24 hours!
(Check quantity)
Regular price €41.38 Price €41.38

Arduino MKR Zero module ABX00012 - SAMD21-with connectors

Module with chip Atmel SAMD21 Cortex-M0+, allowing you to study modules for 32-bit. Has 256 KB Flash memory, 32 KB SRAM, 22 digital inputs/outputs, 12 channels PWM) and 7...
Index: ARD-10051
Index: ARD-10051
In stock, shipping 24 hours!
(Check quantity)
Regular price €26.53 Price €26.53

Arduino GSM MD 1400-B - module ABX00018 with connectors

The module based on the layout of the Atmel SAMD21 SoC with GSM module SARAU201 designed for IoT projects. Equipped With A Cortex-M0+. Has 256 KB Flash memory, 32 KB SRAM, 8...
Index: ARD-12314
Index: ARD-12314
Czas oczekiwania ok. 7-14 dni
Regular price €73.58 Price €73.58

Arduino MKR1000 module ABX00004 - Wi-Fi ATSAMW25 - without connectors

The module based on ATSAMW25 Atmel SoC system with wi-fi, designed for IoT projects. Equipped With Cortex-M0. Has 256 KB Flash memory, 32 KB SRAM, 8 digital inputs/outputs, 12...
Index: ARD-12454
Index: ARD-12454
In stock, shipping 24 hours!
(Check quantity)
Regular price €39.38 Price €39.38

Arduino MKR1010 module ABX00023 - Wi-Fi ATSAMW25 + ESP32 - with connectors

The module based on the ATSAMW25 Atmel SoC system with wi-fi ESP32 U-Blox designed for IoT projects. Equipped With Cortex-M0. Has 256 KB Flash memory, 32 KB SRAM, 8 digital...
Index: ARD-12945
Index: ARD-12945
In stock, shipping 24 hours!
(Check quantity)
Regular price €35.10 Price €35.10

Arduino MCR Vidor4000 ABX00022 - module with FPGA Cyclone 10

The module based on the system Atmel SAMD21, designed for IoT projects. Equipped with a Cortex-M0+. It has 2 MB of Flash memory, 8 MB SRAM. In addition, the system is...
Index: ARD-12946
Index: ARD-12946
In stock, shipping 24 hours!
(Check quantity)
Regular price €74.03 Price €74.03

Arduino MKR WAN 1300 LoRaWAN ABX00017 module - SAMD21 - with headers

The module is equipped with a 32-bit processor Atmel ARM Cortex-M0+, 256KB Flash memory and 32KB SRAM. It combines the capabilities of tile MKR Zero and connectivity LoRa. The...
Index: ARD-13292
Index: ARD-13292
In stock, shipping 24 hours!
(Check quantity)
Regular price €43.88 Price €43.88

Filament Velleman PLA 1.75mm 0,75kg - white

Filament made of PLA used as a cartridge for 3D printers and printing pens. The diameter is 1.75 mm. The kit contains 750 g filament in white color with length of approx. 250m.
Index: VEL-10741
Index: VEL-10741
In stock, shipping 24 hours!
(Check quantity)
Regular price €21.35 Price €21.35

Filament Spectrum PLA 1.75mm 1kg - Deep Black

Filament made of PLA used as a cartridge for 3D-printers and printing pens. The diameter of 1.75 mm. The set includes 1kg of filament in color Deep Black with length of 330.m.
Index: SPC-10979
Index: SPC-10979
In stock, shipping 24 hours!
(Check quantity)
Regular price €18.00 Price €18.00

Filament Spectrum PLA 1.75mm 1kg - Polar White

Filament made of PLA used as a cartridge for 3D printers and printing pens. The diameter of 1.75 mm. The set includes 1kg of filament in color Polar White with length of 330 m.
Index: SPC-10985
Index: SPC-10985
In stock, shipping 24 hours!
(Check quantity)
Regular price €18.00 Price €18.00

Filament Spectrum PLA 1.75mm 1kg - Arctic White

Filament made of PLA used as a cartridge for 3D printers and printing pens. The diameter of 1.75 mm. The set includes 1kg of filament in color Arctic White with length of 330...
Index: SPC-10986
Index: SPC-10986
In stock, shipping 24 hours!
(Check quantity)
Regular price €18.00 Price €18.00

Filament Spectrum PLA 1.75mm 1kg - Lime Green

Filament made of PLA used as a cartridge for 3D printers and printing pens. The diameter of 1.75 mm. The set includes 1kg of filament in color Lime Gren with length of 330 m.
Index: SPC-10991
Index: SPC-10991
In stock, shipping 24 hours!
(Check quantity)
Regular price €18.00 Price €18.00

Products from the same category

Arduino Mega 2560 Rev3 - module A000067

Popular module with microcontroller AVR ATmega2560 . It has 256 KB Flash memory, 8 KB RAM, 54 digital inputs/outputs, of which 15 can be used as PWM channels, 16 analog...
Index: ARD-01062
Index: ARD-01062
In stock, shipping 24 hours!
(Check quantity)
Regular price €35.78 Price €35.78

Arduino Leonardo - module A000057

Popular module with AVR microcontroller Atmega32U4. Has 32 KB Flash memory, 2.5 KB RAM, 20 digital inputs/outputs, of which 7 can be used as PWM channels and 12 as analog...
Index: ARD-01213
Index: ARD-01213
In stock, shipping 24 hours!
(Check quantity)
Regular price €19.80 Price €19.80

Arduino Micro - module A000053

Module based on the Arduino® Leonardo with Atmega32U4 AVR microcontroller, is characterized by small size. Has 32 KB Flash memory, 2.5 KB RAM, 20 digital inputs/outputs, of...
Index: ARD-01481
Index: ARD-01481
In stock, shipping 24 hours!
(Check quantity)
Regular price €20.23 Price €20.23

Arduino Pro Mini 328 module - 3.3 V/8 MHz - SparkFun DEV-11114

The module based on the Arduino® Uno, is characterized by small size and low profile. It has an Atmega328 microcontroller with 32 KB Flash memory, 2 KB RAM, 14 digital I/o, 6...
Index: SPF-01596
Index: SPF-01596
In stock, shipping 24 hours!
(Check quantity)
Regular price €11.23 Price €11.23

Arduino Due ARM Cortex - module A000062

The popular run set based on the Atmel AT91SAM3X8E. Thanks to the Arduino® Due, the user can create layouts using a system with a 32-bit core ARM Cortex, based on libraries for...
Index: ARD-01214
Index: ARD-01214
In stock, shipping 24 hours!
(Check quantity)
Regular price €39.83 Price €39.83

Arduino Nano module A000005

Module based on Arduino® Uno with microcontroller AVR Atmega328 is characterized by small size. Has 32 KB Flash memory, 2 KB of RAM, 22 digital inputs/outputs, 6 of which can...
Index: ARD-12960
Index: ARD-12960
In stock, shipping 24 hours!
(Check quantity)
Regular price €21.38 Price €21.38

Arduino Uno WiFi Rev2 - module ABX00021

Module with microcontroller AVR ATmega4809, equipped with an U-block W102 system for communication with the wi-fi network. Has 48 KB of Flash memory, 6 KB RAM, 14 digital...
Index: ARD-13281
Index: ARD-13281
In stock, shipping 24 hours!
(Check quantity)
Regular price €47.03 Price €47.03

Arduino Yún Rev2 module ABX00020 - WiFi + Ethernet

Connecting Arduino® and Linux,  allows, via wi-fi network, to wirelessly program and control the device. The module based on system ATmega32u4, has 32 KB of Flash...
Index: ARD-12315
Index: ARD-12315
In stock, shipping 24 hours!
(Check quantity)
Regular price €56.03 Price €42.02
  • Reduced price
  • On sale

Arduino Leonardo - module A000052 - low profile (without connectors)

Popular module with microcontroller AVR Atmega32U4. It has 32 KB of Flash memory, 2.5 KB RAM, 20 digital inputs/outputs, 7 of which can be used as PWM channels and 12 as analog...
Index: ARD-01061
Index: ARD-01061
In stock, shipping 24 hours!
(Check quantity)
Regular price €18.45 Price €18.45

Arduino Fio module - SparkFun DEV-10116

The Arduino® module is based on Arduino® Atmega328P, compatible with software Funnel. It has 32 kB of Flash memory, 2 kB of RAM, 14 digital of I/os, 6 of which can be used as...
Index: SPF-01591
Index: SPF-01591
In stock, shipping 24 hours!
(Check quantity)
Regular price €31.28 Price €31.28

Arduino Pro Mini 328 module - 5V/16MHz - SparkFun DEV-11113

Module based on Arduino® Uno , features small size and low profile. It has an Atmega328 microcontroller with 32 kB of Flash memory, 2 kB of RAM, 14 digital I/Os (6 of which...
Index: SPF-01595
Index: SPF-01595
Available, 24 hours shipping!
(Check quantity)
Regular price €11.23 Price €11.23

Arduino Pro 328 module - 5V/16MHz - SparkFun DEV-10915

Module based on Arduino® Uno with ATmega328 system, is characterized by small size and low profile. It has 32 KB of Flash memory, 2 KB of RAM 14 digital of I/os, 6 of which can...
Index: SPF-01593
Index: SPF-01593
In stock, shipping 24 hours!
(Check quantity)
Regular price €17.30 Price €17.30