Minicomputer UP Squared V2 8GB RAM + 64GB eMMC Intel Pentium J6426
Index: AAE-24035
- Reduced price
- Promotion
Li-Ion Titan 3000mAh 16C 3S 11,1V (Stick) battery - DEANS - 18x200mm
Index: GFR-19648
- On sale!
- Promotion
List of products by brand Seeedstudio - Strona 20
Loading...
Wio Lite W600 - ATSAMD21 - with connectors
Wio Lite W600 module equipped with Atmel SAMD21 Cortex-M0+ and W600 ARM Cortex-M3 module responsible for 2.4 GHz Wifi wireless communication. The module is powered by a 5-volt...
Index: SEE-15259
Index: SEE-15259
- EOL
Module based on M24LR64E-R chip equipped with 64-bit unique identifier and 64-Kbit EEPROM memory communicating wirelessly in 13.56 MHz band. The module complies with ISO 15693...
Index: SEE-15266
Index: SEE-15266
- EOL
Grove - W600 WiFi module ARM Cortex M3
2.4 GHz WiFi module for Arduino supporting 802.11 b/g/n standard. W600 is based on ARM Cortex M3 processor with 1 MB flash memory and freeRTOS kernel. It communicates via UART...
Index: SEE-15455
Index: SEE-15455
- EOL
Grove - capacitice touch keyboard ATiny1616 - 12 buttons - Seeedstudio 101020636
12-button capacitive touch keypad module based on ATiny1616 AVR 8-bit 16 MHz chip. High-performance chip with integrated QTouch touch controller supports capacitive...
Index: SEE-15545
Index: SEE-15545
- EOL
Grove - MP3 player KT403A - Seeedstudio 107020008
Small MP3 player based on KT403A chip. Under the 3.5 mm jack connector you can connect speakers or headphones, files are played from a microSD card. The module supports MP3,...
Index: SEE-15560
Index: SEE-15560
- EOL
Grove - FM receiver RDA5807M - Seeedstudio 107020049
Broadband FM receiver module based on RDA5807M , which is a single-processor FM radio tuner with integrated synthesizer. There is a 3.5 mm jack connector on the board to...
Index: SEE-15561
Index: SEE-15561
- EOL
Grove - RGB LED Ring WS2813 x 16 LEDs - 58 mm - Seeedstudio 104020171
Ring consisting of 16 individually addressed RGB LEDs with integrated WS2813 controller. One microcontroller pin is sufficient to operate the module. The outer diameter of...
Index: SEE-15555
Index: SEE-15555
- EOL
Grove Speech Recognizer Kit for Arduino - Seeedstudio 110020108
A set that allows to create a project based on Arduino speech recognition . The set includes Speech Recognizer module, MP3 player, RTC module, receiver and infrared...
Index: SEE-15562
Index: SEE-15562
- EOL
Grove - 3-acces accelerometer MMA7660FC - I2C - Seeedstudio 101020039
Module with 3-axis accelerometer, based on MMA7660FC chip . Allows measurement of 3-axis acceleration within ± 1. 5 g. The module communicates through the I2C interface,...
Index: SEE-15579
Index: SEE-15579
- EOL
WiFi module W600 ARM Cortex-M3 - 16GPIO, antena PCB
W600 WiFi module supporting 2.4 GHz communication, supports 802.11 b/g/n standard. W600 chip has ARM Cortex-M3 core with 1 MB of flash memory and freeRTOS kernel. W600 has...
Index: SEE-15577
Index: SEE-15577
- EOL
Grove - 3-Axis Digital Accelerometer I2C ADXL357 - Seeedstudio 101020639
Digital, 3-axis industrial quality accelerometer based on the MEMS chip ADXL357 . It measures in three different ranges and accuracies: ± 10 g at 51200 LSB/g, ± 20 g at...
Index: SEE-15578
Index: SEE-15578
- EOL
Grove - 3-Axis accelerometer LIS3DHTR - I2C/SPI/ADC - Seeedstudio 114020121
3-axis accelerometer capable of measuring acceleration within ± 2 g, ± 4 g, ± 8 g, ± 16 g. It communicates via the I2C, SPI or ADC GPIO interface. It has the ability to...
Index: SEE-16905
Index: SEE-16905
- EOL
SenseCAP Wireless Soil Moisture and Temperature Sensor - LoRaWAN 868MHz - Seeedstudio 101990564
SenseCAP soil moisture and temperature sensor allowing for volumetric measuring the water content from 0% to 100% (m3/m3) and soil temperature measurements within the...
Index: SEE-16985
Index: SEE-16985
- EOL
Grove - Oxygen sensor - MIX8410 - analog
Electrochemical oxygen sensor, which allows to measure oxygen concentration in the air. The oxygen concentration is determined by comparing the current created as a result of...
Index: SEE-17917
Index: SEE-17917
- EOL
WiFi EMW3165 Cortex M4 module with PCB antenna
EMW3165 module connecting the wi-fi IEEE 802.11 b/g/n and STM32F411CE microcontroller with a Cortex M4, 100 MHz, 128 KB RAM, 512 KB of Flash with extra 2 MB on the SPI bus. The...
Index: SEE-04390
Index: SEE-04390
- EOL
EVA case for RF Explorer spectrum analyzer - 3G Combo
Case fr the portable spectrum analyzer RF Explorer - 3G Combo. It can be used for protecting the device from damage during transport. The case also has space for the supplied...
Index: SEE-04385
Index: SEE-04385
- EOL
E-paper Shield v2 for 2'" Display- Shield for Arduino
Shield for Arduino allows the use of displays e-paper 2.0 and a 2.7". A smooth surface facilitates assemblying the display, which must be purchased separately.
Index: SEE-04404
Index: SEE-04404
- EOL
Seeed BLE Shield Bluetooth 4.0 - Shield for Arduino
Shield for Arduino from Seeedstudio that enables communication in Bluetooth 4.0 BLE at a distance of up to 30 meters. Shield communicates over the UART interface, it has...
Index: SEE-04421
Index: SEE-04421
- EOL
Seeeduino Stalker v3 ATmega328 3.3 V/8 MHz + RTC
A module made by Seeedstudio is equipped with the ATmega328 microcontroller. It has special slot for XBee modules. The distribution of pins is compatible with the Arduino Uno....
Index: SEE-04422
Index: SEE-04422
- EOL
![NFC Shield v2.0 pad on Arduino [OK]](https://cdn1.botland.store/59128-home_default/nfc-shield-v20-shield-for-arduino.jpg)
NFC Shield v2.0 - Shield for Arduino
Shield for Arduino, enabling the reading of data from the NFC and RFID devices at 13.56 MHz. The module has a built-in antenna, is powered from Arduino pins, it communicates...
Index: SEE-04420
Index: SEE-04420
- EOL
Wio Link WiFi ESP8266 IoT with the Grove connectors
The module is based on ESP8266. It has the ability to connect to wi-fi and 3 digital ports of input/output, 1 analog input, as well as popular network interfaces: UART and I2C....
Index: SEE-06989
Index: SEE-06989
- EOL
LCD RGB display - hat for Raspberry Pi
Module with 2x16 display for the Raspberry Pi. The display has a RGB backlight, with a choice of colors. It has a driver HD-44780, it communicates using the I2C interface.
Index: SEE-09668
Index: SEE-09668
- EOL
The Grove module is based on a CT10 reed switch. Sensor can be actuated by an electromagnet or permanent magnet. Powered by 5 V. Communicates via TTL interface.
Index: SEE-11334
Index: SEE-11334
- EOL
Grove - OLED display 1.12'' 96x96px I2C
OLED-display with a 1.12" diagonal and a resolution of 96 x 96 pixels. It supports normal and inverted colors. Screen-based driver SSD1327Z works with voltages of 3.3 V and...
Index: SEE-11341
Index: SEE-11341
- EOL