- New
Product description: 3D printer - Original Prusa CORE One L - Advanced Filtration Bundle
The Prusa CORE One L is a large-format, closed-loop 3D printer based on CoreXY kinematics, designed for prototyping, low-volume production, and large-scale component manufacturing. The 300 x 300 x 330 mm build volume allows for printing models up to 30 liters without having to split them into smaller parts. The actively heated chamber reaches up to 60°C , and the aluminum AC heated bed with a dual-circuit heating system helps maintain an even temperature across a large surface. Nextruder Direct Drive, Input Shaper, Phase Stepping, and automatic bed leveling support high quality and consistent prints. The Advanced Filtration Bundle includes a filtration system with a HEPA filter, activated carbon, and a firmware-controlled blower . The printer supports PLA, PETG, Flex, PC, PP, CPE, PVB, ABS, ASA, HIPS, and PA , among others, and communicates with Ethernet, NFC, and Wi-Fi . Prusa CORE One L comes pre-assembled and calibrated , so it can start working right out of the box.
3D printer - Original Prusa CORE One L - Advanced Filtration Bundle.
The active air circulation system uses two powerful fans under the table, creating a convection effect that allows the chamber to heat up to 60°C.
The large build volume of the Prusa CORE One L printer
The Prusa CORE One L offers a build volume of 300 x 300 x 330 mm , allowing for much larger projects than standard 3D printers. Advanced CoreXY kinematics combined with a rigid steel exoskeleton enable high printing speeds while maintaining exemplary precision. Input Shaper and Phase Stepping technologies eliminate vibrations and resonances, resulting in smooth model surfaces free of VFA defects. Thanks to a closed chamber with stable temperatures , the printer ensures consistent production, crucial in professional workshops.
Modern AC heating table with active circulation
The new Prusa CORE One L heating bed utilizes an alternating current (AC) power supply and an active air circulation system to ensure even heat distribution throughout the print chamber (up to 60°C). This prevents material warping, regardless of its position on the bed, and maintains optimal temperatures throughout the entire printing process. The bed eliminates the problem of cold corners . which is especially important when working with materials that require precise temperature setting, such as ASA , ABS or nylon .
Wide material compatibility and filtration system
The printer uses 1.75 mm diameter filament and works with materials from various manufacturers. The standard configuration supports PLA, PETG, Flex, PVA, PC, PP, CPE, and PVB, among others. The enclosed and heated chamber also allows for comfortable work with materials such as ABS, ASA, HIPS, and PA. This version features an advanced filtration system with a HEPA filter with a declared efficiency of 99.9%, activated carbon granules , and a high-pressure blower , which helps reduce UFPs, VOCs, and odors generated when working with more demanding filaments . The HEPA filter is replaceable and has an estimated lifespan of at least 600 hours.
Extensive connectivity and remote management support
The Prusa CORE One L offers a variety of connectivity options, including Ethernet, NFC, USB , and support for Prusa Connect and a mobile app . With Prusa Connect, you can remotely manage the printer, monitor print progress, and receive notifications on your phone . The mobile app for iOS and Android allows for easy integration with the printer and real-time control. A unique feature of the printer is its ability to work completely offline , which, combined with the ability to physically disconnect the WiFi module , meets stringent safety standards.
The advanced filtration system is useful when printing with materials that produce a higher amount of fine particles and fumes.
Prusa CORE One L is ready to go in minutes out of the box, making it the perfect solution for industry, engineers, and demanding hobbyists.
Quick setup of the Prusa CORE One L 3D printer
The CORE One L is shipped pre-assembled and calibrated , significantly shortening the setup process. The factory configuration includes features such as Input Shaper and Phase Stepping, so you don't need to start with extensive calibration of the device's mechanics. After unpacking , you need to perform basic preparations, connect the display and power supply, and navigate through the startup screen . According to the manufacturer, the first run can begin in about 5 minutes.
Prusa software - full control over the printing process
The primary software for model preparation is PrusaSlicer , a free, open-source slicer that runs locally on your computer and offers pre-built material profiles and extensive print settings. The ecosystem also includes EasyPrint for simple online model preparation, Prusa Connect for remote printer management, and the Prusa app for smartphone control. You can also use the Printables service for a library of 3D models, and the printer's firmware is developed in a public GitHub repository.
Contents of the set
- Prusa CORE One L 3D Printer (assembled and calibrated)
- Filtration system
- 1080p indoor camera with night vision
- 0.4mm nozzle (high flow, mounted)
- 0.4 mm nozzle (abrasion resistant)
- Spring steel plate with PEI coating (satin)
- Prusament PLA (1 kg)
- USB drive with sample models
- 3D printing manual and service accessories
- Access to the Prusa Academy course (online)
Elements included in the set.
| Technical specifications of the Prusa CORE One L 3D printer | |
|---|---|
| Workspace | 300 x 300 x 330 mm |
| Max nozzle temperature | 290°C |
| Max table temperature | 120°C |
| Max chamber temperature | 60°C |
| Filament diameter | 1.75 mm |
| Layer height | From 0.05 mm to 0.3 mm |
| Supported materials | PLA, PETG, Flex, PVA, PC, PP, CPE, PVB and, when equipped with an optional filtration system, ABS, ASA, HIPS, PA |
| Extruder | Nextruder, Direct Drive, E3D V6 compatible (with adapter) |
| Stepper motors | Trinamic 2130 |
| Electronics | 32-bit xBuddy motherboard with STM32 |
| Cooling system | High-performance turbine, 360° cooling |
| Nozzles | 0.4mm high flow brass, 0.4mm abrasion resistant |
| Communication | Ethernet, NFC, USB, Prusa Connect, Prusa mobile app |
| MMU3 compatibility | Yes (purchased separately) |
| Quick nozzle change system | Yes |
| Automatic leveling system | Yes, Mesh Bed Leveling |
| Sensors | 2 filament sensors, door opening sensor, strain gauge sensor |
| LCD screen | 3.5'' graphic screen with 65,000 colors |
| Power requirements | Standby: 16 W, Warm-up: 630 W, Average power consumption during printing: PLA / PETG / ASA: 90 W / 155 W / 215 W |
| Dimensions | 469 x 521 x 635 mm |
| Mass | 21.9 kg |
