Over 500,000 customers already trust us. With us you get:
same-day shipping for products marked “24h shipping”
our own service centre in Poland
30 days to return and free delivery in Poland from PLN 500
4.9/5 on TrustMate and 4.9/5 on Google (almost 4,000 reviews)
VAT invoice, leasing and instalments for businesses
For businesses
individual quote for larger quantities
VAT invoice
For schools and universities
orders based on requests for quotation
help with choosing kits for your lab
Feather RP2040 microcontroller board with RP2040 microcontroller and USB A host - Adafruit 5723
A board from Adafruit - Feather RP2040 with a USB type A host. It is based on the RP2040 microcontroller from the Raspberry Pi Foundation , with a dual-core ARM Cortex M0+ clocked at up to 133 MHz , with 264 kB of RAM and 8 MB of Flash memory operating via the QSPI interface. The module pins include as many as 21x GPIO pins - 4x ADC 12-bit, 2x I2C, 2x SPI, 2x UART, 16x PWM. The Feather RP2040 board can be programmed using MicroPython, CircuitPython or C/C++. The program can be implemented via the USB interface (USB Type C connector), using the built-in UF2 bootloader, or via an external programmer.
We could not load the price.
The promotional price does not combine with quantity discounts.
Product description: Feather RP2040 - board with RP2040 microcontroller and USB A host - Adafruit 5723
A board from Adafruit - Feather RP2040 with a USB type A host. It is based on the RP2040 microcontroller from the Raspberry Pi Foundation , with a dual-core ARM Cortex M0+ clocked at up to 133 MHz , with 264 kB of RAM and 8 MB of Flash memory operating via the QSPI interface. The module pins include as many as 21x GPIO pins - 4x ADC 12-bit, 2x I2C, 2x SPI, 2x UART, 16x PWM. The Feather RP2040 board can be programmed using MicroPython, CircuitPython or C/C++. The program can be implemented via the USB interface (USB Type C connector), using the built-in UF2 bootloader, or via an external programmer .
Feather RP2040 - board with RP2040 microcontroller and USB A host - Adafruit 5723.
Botland is an official distributor of Adafruit electronics. These dependable American solutions cover sensors, controllers, Arduino shields, educational systems, smart building and a wide range of accessories. The Botland range holds original Adafruit products only.
The board is equipped with the RP2040 system.
Also check the user guide prepared by the manufacturer.
Main features of the Adafruit tile
- 32-bit dual-core Cortex M0+ operating at a frequency of up to 133 MHz with a logic voltage and 3.3 V power supply
- As much as 264 kB of built-in SRAM memory
- 8MB SPI Flash memory for storing CircuitPython/MicroPython files and code (no EEPROM)
- 21x GPIO, including: 4x ADC 12-bit, 2x I2C, 2x SPI, 2x UART, 16x PWM
- 200 mA+ lithium polymer charger system with assigned LED indicating charge status
- RGB NeoPixel diodes and red LED (pin 13)
- STEMMA QT connector for quick and solder-free connection of any peripheral devices with a Qwiic, STEMMA QT or Grove I2C connector
- USB Type-C connector allowing access to the onboard USB ROM bootloader and serial port debugging
- USB type A connector enabling USB host support (D+ pin GPIO 16, D- pin GPIO 17)
Pinouts of the Feather RP2040 board
- USB Type C connector - used for power supply and data transfer, allows code and software updates
- USB type A connector - used to connect an additional USB device, currently this USB host function is only available in Arduino
- JST connector - a 2-pin connector for connecting a Li-Ion or Li-Pol battery that will power the board, it can also be used to charge the battery
- chg LED - LED indicating the charging status of the connected battery when charging via the USB port
- GND - system ground
- BAT - positive voltage common to the JST socket for the optional battery
- USB - positive voltage common to the USB C socket
- EN - pin enabling the built-in 3.3 V regulator, to turn it off, connect it to ground
- 3.3 V - voltage stabilizer pins
More information about the remaining pins of the board can be found here .
Arrangement of module pins.
Elements included in the set.
Technical specifications of the board
- Built-in chip: Raspberry Pi RP2040
- Core: ARM Cortex-M0+ Dual-Core 133 MHz
- SRAM memory: 264 kB
- Built-in QSPI Flash memory: 8 MB
- Communication interfaces: 2x SPI, 2x I2C, 2x UART, 4x 12-bit ADC, 16x PWM
- Development environment: C/C++ or MicroPython
- Power connector: USB Type-C
- Pinouts: GPIO, STEMMA QT / Qwiic, USB type A connector
- Power connector: JST connector for connecting the battery
- Stabilizer: 3.3V with 500mA peak current output
- Voltage converter: 5V Boost
- Mounting holes: 4x
- Dimensions: 51 x 23 x 7 mm
Useful links
| Name | Value |
|---|---|
| UC - Microcontroller | RP2040 |
| UC - Core | ARM Cortex-M0+ |
| UC - Flash | 8 MB |
| UC - core | 2. Dual Core |
| Width | 7.5 cm |
| Height | 10 cm |
| Depth | 1 cm |
| Weight | 0.01 kg |
GLS
Shipping in 24 hours
from €8.07
Raben - pallet delivery
Delivery in 3–5 days, no inside delivery
from €96.75
The full delivery terms are on the page Delivery and payment.
30 days to return, without giving a reason
If the product does not meet your expectations, you have 30 days from receiving the parcel to withdraw from the contract. The product only has to be complete. The right of return belongs to consumers (a purchase unrelated to business activity).
Complaints
If the product turns out to be faulty, you can make a claim under the guarantee or the statutory warranty. We handle claims without delay, at the latest within 14 working days of receiving the report together with the goods.
Be the first to ask a question about this product!
Instructions and documents
GPSR data
Product information
This product is a component intended for further assembly or prototyping. It is not a finished product within the meaning of the product safety regulations.
Products from the same category
See all
