Textured PEI plate
A matte, grainy surface for PETG and PLA, from which the print releases by itself once the plate cools down.
- New
Over 500,000 customers already trust us. With us you get:
same-day shipping for products marked “24h shipping”
our own service centre in Poland
30 days to return and free delivery in Poland from PLN 500
4.9/5 on TrustMate and 4.9/5 on Google (almost 4,000 reviews)
VAT invoice, leasing and instalments for businesses
For businesses
individual quote for larger quantities
VAT invoice
For schools and universities
orders based on requests for quotation
help with choosing kits for your lab
3D printer - Original Prusa XL+ - 1 head - assembled
A large format 3D printer upgradable to five toolheads: the Prusa XL+ with one head prints parts up to 360 mm in every axis (46.7 l) and grows with your needs, without replacing it.
- Automatic calibration of toolheads and the first layer
- Printing 10-15% faster than on the Prusa XL
- A bed with 16 separately heated zones
We could not load the price.
List price
Your price
Net price:
The promotional price does not combine with quantity discounts.
Price:
Regular price:
Remaining time until the promotion ends:
Large format 3D printing with one head
Original Prusa XL+ with one head is the second generation of the large format Prusa 3D printer with an automatic tool changer and a 360 x 360 x 360 mm build volume. The changer parks one toolhead and picks up the next one with its own material, and the 46.7 l build volume fits large parts in one piece or a whole series of smaller models on one bed at the same time.
The printer has one toolhead, but the same frame and electronics as the multi-head versions, so you can add more later with the manufacturer's upgrade kit, without replacing the printer.
Prusa XL+ with a large print on the bed
360 x 360 x 360 mm
build volume, 46.7 l
1 → 5
heads after upgrading the same frame
16
separately heated bed zones
10-15%
faster printing than on the Prusa XL
What sets this model apart
A large format printer you can upgrade to five heads
The one-head version gives you the full 360 x 360 x 360 mm build volume and the same tool changer frame as the five-head version, which you can upgrade later without replacing the printer. Keep in mind that multi-material printing starts only with the second head, so if you plan it right away, choose the two-head version, which prints the model and supports from two materials.
1 head
active tool changer, each toolhead with its own nozzle
46,7 l
of build volume (CORE One L+: 29.7 l)
automatic
toolhead offset calibration with a sensor (XL: pin)
Case with an insert printed from two materials
One head today, more after an upgrade
To start, you get the full build volume and one Nextruder toolhead, which works well for large single-material prints: mock-ups, props, fixtures and enclosures. The frame and electronics are the same as in the five-head version, so you can easily upgrade it later with a kit.
- You can upgrade the printer to two or five heads with a kit in one afternoon
- You swap a nozzle in minutes to 0.25 mm for details or 0.8 mm for fast printing
- The filament sensor pauses the print when the spool runs out and waits for a new one
- After a power outage, the printer resumes printing where it stopped
Prusa XL+ and the new generation of Prusa printers
Manufacturer's presentation: what has changed in the Prusa XL+, CORE One L+ and CORE One+ (Gen 2).
Video: the manufacturer's official YouTube channel.
Botland is a reseller of Prusa 3D printers in Poland. Buying from us means original equipment from a warehouse inside the country and fast technical support. We also offer a professional service in Poland and original spare parts.
Pin-free calibration and smoother walls
In the first Prusa XL, toolheads were aligned by hand with a mechanical pin. The XL+ measures toolhead offsets with an electronic sensor, and the first layer is calibrated by the Loadcell sensor, which uses the nozzle as a probe, so you do not set the nozzle-to-bed distance.
- 1.5 mm GT belts reduce fine, repeating patterns on large smooth walls
- New toolhead cooling improves overhangs, and extra fans cool the electronics
- A wiper cleans each nozzle before printing
- Printing is 10-15% faster than on the Prusa XL, also thanks to the new 1.5 mm GT belts
Linear guide and belt of the Prusa XL+ axis
A large dragon model printed in one piece on the Prusa XL
Large prints on an ordinary workbench
The bed consists of 16 separately controlled heating zones, so the printer heats only the zones under the print, which limits warping and energy use for small models. Despite the 360 mm build volume in every axis, the XL+ fits on an ordinary workbench and draws 235 W on average when printing with PETG from a standard outlet, with no three-phase installation.
- Fully offline operation: slicing, printing and firmware updates without a cloud account
- Ethernet as standard, and the WiFi module can be physically removed
- Open source firmware and the free PrusaSlicer
- Any 1.75 mm filament, with no chips and no subscriptions
Sample prints from the Prusa XL
Expand your Prusa XL+ with accessories
ObXidian nozzle 0.4 mm
A coated tool steel High Flow nozzle, resistant to abrasive carbon fiber materials.
PTFE tube for Prusa XL
A spare tube that guides the filament from the spool to the toolhead, cut to the length you need.
Is it the right choice for you?
A good choice if you:
- print large parts from a single material: mock-ups, props, fixtures and enclosures
- want to enter the XL+ platform at the lowest possible cost and add toolheads later
- need a 360 x 360 x 360 mm build volume without splitting models into parts
Consider another option if you:
- need two materials right away: choose Prusa XL+ 2 heads
- print large parts in ASA or ABS: choose Prusa XL+ 1 head with enclosure
What has changed compared to the Prusa XL
| Change | What it means |
|---|---|
| Toolhead offset calibration with an electronic sensor | instead of a manual pin procedure, the printer aligns the toolheads by itself |
| 1.5 mm GT belts | fewer fine repeating patterns on large smooth walls |
| New cooling of toolheads and electronics | better overhangs, fewer supports and cooler electronics during long prints |
| Nozzle wiper | clean nozzles before every print and more accurate calibration |
| Faster printing | 10-15% shorter print time than on the Prusa XL for the same model |
| New Enclosure for Prusa XL+ | optionally up to 50 °C in the chamber, and up to 60 °C with an external heater; fits only the XL+ |
| Unchanged | 360 x 360 x 360 mm build volume, tool changer design and list of materials |
Comparison of Prusa XL+ versions
| Prusa XL+ 1 head | Prusa XL+ 2 heads | Prusa XL+ 5 heads | Prusa XL+ 1 head with enclosure | |
|---|---|---|---|---|
| Number of toolheads | 1 | 2 | 5 | 1 |
| Materials in one print | 1 | up to 2 | up to 5 | 1 |
| Enclosure with HEPA filter included | no | no | no | yes |
| Build volume | 360 x 360 x 360 mm | 360 x 360 x 360 mm | 360 x 360 x 360 mm | 360 x 360 x 360 mm |
| See | this page | Prusa XL+ 2 heads | Prusa XL+ 5 heads | Prusa XL+ 1 head with enclosure |
Fun fact
A toolchanger without electromagnets
The toolheads of the Prusa XL are held by a kinematic coupler that works without electromagnets or any other active elements. Sensors confirm that a toolhead has been swapped correctly. In 2021 Prusa reported more than half a million tool changes in internal tests without a single hitch. The changer supports up to five toolheads per printer.
Frequently asked questions
How does XL+ differ from XL?
The XL+ has automatic toolhead offset calibration with a sensor instead of a pin, new cooling, a nozzle wiper and 1.5 mm GT belts, and it prints 10-15% faster. The build volume, tool changer and materials are unchanged.
What is the XL+ build volume?
The build volume is 360 x 360 x 360 mm (46.7 l), about 3 times more than in the CORE One+ and 1.5 times more than in the CORE One L+, for large one-piece parts.
Prusa XL+ or CORE One L+?
The CORE One L+ is an enclosed single-nozzle printer with a build volume of about 30 l. The XL+ has over 50% more, 46.7 l, and up to five toolheads in one job, so it suits the largest parts and multi-material printing better.
Can I add more toolheads later?
Yes. Every XL+ has the same frame and electronics, so going from one to two or five toolheads needs the manufacturer's upgrade kit and takes one afternoon.
Do I need an enclosure?
No, for PLA and PETG prints. An enclosure helps with large ASA and ABS parts, and for PC and nylon the manufacturer recommends the heated Enclosure for Prusa XL+.
Is a cloud account required?
No. The printer works fully offline: slicing in PrusaSlicer, printing and firmware updates do not require the internet. Remote monitoring via Prusa Connect is optional.
Package contents
- 1 x Prusa XL+ 3D printer with one head, assembled
- 1 x Spring steel plate with powder-coated PEI, satin, double-sided
- 1 x Prusament PLA filament 1 kg
- 1 x Tool kit: universal wrench, 13-16 wrench, pliers, hex and torx keys
- 1 x Prusa bearing grease
- 1 x Alcohol wipes and a nozzle cleaning needle
- 1 x USB drive with sample prints
- 1 x 3D printing handbook
The enclosure is not included.
Technical specification
| Parameter | Value |
|---|---|
| Type | FDM 3D printer, CoreXY, active tool changer |
| Number of toolheads | 1 (upgradable to 5) |
| Build volume | 360 x 360 x 360 mm (46.7 l) |
| Filament diameter | 1,75 mm |
| Layer height | 0.05-0.3 mm |
| Extruder | Nextruder, direct drive, 10:1 planetary gearbox |
| Max. nozzle temperature | 290 °C |
| Bed | segmented, 16 separately controlled zones, up to 115 °C |
| Print surface | removable magnetic plate, satin plate included |
| Calibration | automatic: first layer (Loadcell) and toolhead offsets (electronic sensor) |
| Motion system | CoreXY, 1.5 mm GT belts, Input Shaper, Phase Stepping |
| Nozzle cleaning | wiper before every print |
| Sensors | filament sensors, Loadcell, Power Panic, Semitec thermistors, fan speed monitoring |
| Display | 3.5 inch color LCD, touchscreen |
| Connectivity | Ethernet, removable WiFi module, offline operation, Prusa Connect optional |
| Supported materials | PLA, PETG, ASA, ABS, PC, PA, TPU, PVA, HIPS, PP, CPE, PVB, carbon fiber composites |
| Chamber temperature | without an enclosure; optionally up to 50 °C with the Enclosure for Prusa XL+ and up to 60 °C with an external heater |
| Power consumption | 235 W on average when printing with PETG, standard outlet |
| Printer dimensions | approx. 700 x 900 x 720 mm with the side spool holders |
| Printer weight | approx. 30 kg |
Useful links
| Name | Value |
|---|---|
| 3D - print surface | 360x360x360mm |
| 3D - type of printout | FFF/FDM |
| 3D - hotend amount | 1 |
| 3D - filament diameter | 1.75 mm |
| 3D - printing thickness | 0.05 - 0.3 mm |
| 3D - nozzle temp | 290 °C |
| 3D - table temp. | 120 °C |
| Pole robocze | Big |
| Wymiary pola roboczego - oś X | 360 mm |
| Wymiary pola roboczego - oś Y | 360 mm |
| Wymiary pola roboczego - oś Z | 360 mm |
| Plug&Play | Yes |
| 3D - Heated chamber | NO |
| 3D - Camera | NO |
| 3D - Multi-material support | NO |
| 3D - Supported Materials | Basic |
| 3D - Communication |
|
| Width | 59 cm |
| Height | 60 cm |
| Depth | 72 cm |
| Weight | 30.7 kg |
Delivery method
Delivery time
Cost
GLS
Shipping in 24 hours
from €8.07
Raben - pallet delivery
Delivery in 3–5 days, no inside delivery
from €96.75
The full delivery terms are on the page Delivery and payment.
30 days to return, without giving a reason
If the product does not meet your expectations, you have 30 days from receiving the parcel to withdraw from the contract. The product only has to be complete. The right of return belongs to consumers (a purchase unrelated to business activity).
Complaints
If the product turns out to be faulty, you can make a claim under the guarantee or the statutory warranty. We handle claims without delay, at the latest within 14 working days of receiving the report together with the goods.
Be the first to ask a question about this product!
Instructions and documents
GPSR data
Country of origin
Czech Republic
Manufacturer contact details
Prusa Research a.s. Partyzánská 188/7A 17000 Praga 7, Republika Czeska
EU market introducer contact details
Botland B. Derkacz Sp. K., Gola 25A, 63-640 Bralin
Other customers also viewed
Products from the same category
See all
