- New
- Reduced price
- Sale
Raspberry Pi 4B GPIO extensions and HAT - Strona 3
Loading...
RPi Relay Board - 3 relays - cap for Raspberry Pi - Waveshare 11638
Cap fitted to connectors of Raspberry Pi GPIO in version 4B, 3B+, 3B, 2B, B+ and A+, with three relays with parameters of 250 V / 10 A. Board has a screw connector....
Index: WSR-06804
Index: WSR-06804
RGB LED Hat for Raspberry Pi 3/2/Zero - Waveshare 12725
Shield for the Raspberry Pi containing the LED matrix 8 x 4 consisting of WS2812B LEDs. Each LED can be individually set. The device has dimensions of 65 x 30 mm, it works with...
Index: WSR-08869
Index: WSR-08869
Dual channel DC motor driver, I2C interface - HAT for Raspberry Pi - Waveshare 15364
HAT shield for Raspberry Pi 3 / 2 / B+ / Zero / Zero W enabling the control of two DC motors using the I2C interface. It can control simultaneously the two DC motors. A maximum...
Index: WSR-13304
Index: WSR-13304
Pirate Audio 3W Stereo Amp - 3W amplifier with display - AMP for Raspberry Pi - Pimoroni PIM484
Overlay with two DAC chips for the Raspberry Pi minicomputer. The board is equipped with a 3 W stereo audio output , two speaker terminals and a 1.3 " colour IPS display ....
Index: PIM-15898
Index: PIM-15898
Power over Ethernet HAT (D) is an overlay module designed for Raspberry Pi minicomputer 3B+ and 4B versions. Small size and specially designed construction allows to use it also...
Index: WSR-19593
Index: WSR-19593
SIM868 GSM/GPRS/GNSS + Bluetooth - communication module for Raspberry Pi Pico - Waveshare 20268
CAN FD Expansion HAT is a CAN bus expansion overlay produced by Waveshare. It supports the original CAN 2.0 protocol and the CAN FD expansion with higher data throughput....
Index: WSR-20081
Index: WSR-20081
THT 26pin prototype board with screw connectors for Raspberry Pi
Board allows independent creation of electronic circuits. Connected directly to the GPIO pins of the Raspberry Pi minicomputer. It has soldered screw connections and goldpin...
Index: MOD-05662
Index: MOD-05662
MCP23008-E/P - 8-channel I2C pin expander
The system allows to increase the number of pins (up to 8) of a microcontroller (including minicomputer Raspberry Pi). It communicates with the central unit via the I2C bus...
Index: UCC-06505
Index: UCC-06505
- Sale
Argon Fan HAT v1.5 - module with fan for Raspberry Pi
Overlay with 40 x 40 mm fan for Raspberry Pi 4B / 3B+ / 3B. After downloading the script from the manufacturer's website, you can adjust the fan speed . There is a power /...
Index: ARG-15394
Index: ARG-15394
- Reduced price
- SPECIAL OFFERS
IO Expansion HAT for Raspberry Pi 4B/3B+/3B/2B - DFRobot DFR0566
Overlay for Raspberry Pi mini-computer in 4B / 3B+ / 3B / 2B version, where individual sections of Raspberry Pi outputs have been separated , such as: digital, analog, PWM,...
Index: DFR-15713
Index: DFR-15713
Mini PoE Hat - PoE module for Raspberry Pi 4B/3B+/3B + fan - UCTRONICS U6110
A cap to power Raspberry Pi minicomputers using Power over Ethernet technology. This solution allows you to power the minicomputer using a network cable with an RJ-45...
Index: ACM-16898
Index: ACM-16898
Servo pHAT - 16-channel PWM I2C driver for Raspberry Pi - SparkFun DEV-15316
The Servo pHAT overlay from SparkFun allows you to control up to 16 servos via an I2C interface. The chip generates PWM signals up to 1.6 kHz with 12-bit precision ....
Index: SPF-18725
Index: SPF-18725
Sense HAT (C) - multifunctional environmental sensor - overlay for Raspberry Pi - Waveshare 23229
Sense HAT (C) is a multifunctional module equipped with a number of environmental sensors. It has the form of a HAT overlay and is compatible with the Raspberry Pi. It has...
Index: WSR-22397
Index: WSR-22397
Case for Raspberry Pi 4B/3B+/3B/2B open transparent
Transparent case for Raspberry Pi minicomputer in versions 4B, 3B+, 3B, 2B and 1B+ works, in particular, with hats from the HiFiBerry Digi+, DAC+ Amp+. External dimensions:...
Index: RHF-05409
Index: RHF-05409
E-paper of 2.13" 250x122px display (no module) for overlays for the Raspberry Pi - Waveshare 12672
The display of type of e-paper with a diagonal of 2.13 " and a resolution of 250 x 122 px. It is designed to use with shield for Raspberry Pi. It communicates via the SPI...
Index: WSR-09102
Index: WSR-09102
Enviro pHAT - temperature, pressure, light intensity and proximity sensor - overlay for Raspberry Pi
Enviro pHAT is an overlay for Raspberry Pi with BME280 and LTR-559 sensors allowing to measure temperature, pressure, light level and proximity sensor. Additionally, the...
Index: PIM-16966
Index: PIM-16966
Unicorn HAT Mini - LED RGB matrix - for Raspberry Pi - Pimoroni PIM498
Overlay for Raspberry Pi made by Pimoroni company. On the board there are 119 RGB LEDs in the form of 17 x 7 matrix . Thanks to the HT16D35A chip it is possible to...
Index: PIM-19068
Index: PIM-19068
IO pin expander - extension cap for Raspberry Pi 3 / 4 / 400
An expansion overlay for the Raspberry Pi in the form of an IO pin expander . It is compatible with Raspberry Pi version 3 / 4 and 400. On the board all the leads are...
Index: DFR-20073
Index: DFR-20073
Argon One M.2 NVMe expansion board - for Raspberry Pi 4B
Expansion board made by Argon40 for Argon One enclosures , which allows you to boot the Raspberry Pi 4B minicomputer system using an M.2 NVMe SSD. Simply replace the lower...
Index: ARG-21352
Index: ARG-21352
Logic level converter I2C PCA9306 - SparkFun BOB-15439
The module allows bidirectional communication between circuits using different voltage levels for I2C and SMBus. PCA9306 converts voltages from lower range from 1.2 V to 3.3 V...
Index: SPF-01709
Index: SPF-01709
TXB0108 - two-way, 8-channel logic converter - Adafruit 395
The module is based on a TXB0108 system, it allows you to exchange data between systems that use the most popular voltage levels: 3.3 V and 5V. It has eight channels, it...
Index: ADA-02468
Index: ADA-02468
UPS HAT for Raspberry Pi Zero - DFRobot DFR0528
A cap designed for the Raspberry Pi Zero , serving as an emergency power supply in the event of a mains power failure. The module is also compatible with other versions of...
Index: DFR-15714
Index: DFR-15714
Dual-channel RS485 Expansion Hat - for Raspberry Pi 4B - DFRobot DFR0824
Dual-channel RS485 Expansion Hat is an overlay designed for the Raspberry Pi 4B minicomputer. It was designed to extend the functionality of the module with RS485...
Index: DFR-22929
Index: DFR-22929
Mini Kit DC and stepper motor driver TB6612 - Motor Hat for Raspberry Pi - Adafruit 2348
Shield for Raspberry Pi, version A+, B+ and 2 to control four DC motors (13.5 V/1.2 A) or two stepper motors. It communicates through interface I2, using only two lines of...
Index: ADA-03401
Index: ADA-03401
- Sale
- SPECIAL OFFERS