SENSORS - Strona 27
ACS724 current sensor carrier -2,5A to +2,5A - Pololu 4040
The ACS724 is a current sensor module operating in the -2.5 A to 2.5 A range that uses the Hall effect to perform precise current measurements. The module is designed to...Fermion - smoke detector - MEMS - 10-1000ppm - DFRobot SEN0570
A sensor from DFRobot, designed for qualitative smoke detection. The detection range is from 10 ppm to 1000 ppm . Moreover, the sensor is characterized by low energy...FlexiForce Pressure Sensor - 25lbs. (1" area) - SparkFun SEN-11207
Pressure sensor reduces its resistance when the force put to the round tip, increases. The round sensor with a diameter of 25.4 mm, the maximum pressure is 11 kg.Cytron Maker Line -Trim with reflective sensors
The Cytron module equipped with 5 reflective sensors (pair : IR diode and phototransistor) is able to track 13 to 30 mm wide lines in white and black. The sensor has 2...Gravity - 1 kg (10 N) digital pressure sensor - HX711 - Build a scale kit - DFRobot KIT0176
A set of elements for self-assembly , which allow to make an electronic balance . The kit contains a digital pressure sensor, in the form of a strain gauge bar, detecting...DFRobot Gravity - adapter for the GP2Y1010AU0F dust sensor
Adapter for the direct connection of the sensor GP2Y1010AU0F using the Gravity interface for Arduino without additional modules and the prototype board.- Reduced price
- SPECIAL OFFERS
Low Current Sensor ACS723 - 5A current sensor - SparkFun SEN-14544
Current sensor operating in the range from 10 mA to 5 A on the basis of Hall effect. The output is an analog voltage. The supply voltage is 5 V. It has a built-in amplifier and...- Sale
- SPECIAL OFFERS
Gravity - Thermocouple MAX31855K - I2C temperature sensor
Module MAX 31855K together with thermocouple allows to measure high temperatures with high accuracy. It o perates in the range from 0 °C to 800 °C with a supply voltage from...Rotary photocells - with beam direction adjustment for gate drives
Robust photocells for gate operators of the ETM and KSE series and other available drives. The set includes a pair: receiver and transmitter . They have a swivel plate,...BMP390L - pressure and temperature sensor - STEMMA QT / Qwiic - Adafruit 4816
Sensor module equipped with a Bosch BMP388 and BMP390 digital barometer . Enables precise measurement of pressure and altitude in the pressure range from 300 hPa to 1250 h...Grove - TH02 - I2C temperature and humidity sensor
Temperature and humidity sensor TH02 from Grove with I2C interface. The temperature measurement range is from 0 °C to 70 °C and humidity from 0 to 80% RH .- Reduced price
- SPECIAL OFFERS
DFRobot Gravity - 2x16 I2C LCD display - blue
LCD display 2x16 characters with backlight in blue. Communicates with two-wire I2C bus. The kit includes a cable adapted to Gravity DFRobot IO Expansion Shield.AS7263 NIR - Visible Light Spectrum Sensor - SparkFun SEN-14351
The module is equipped with a sensor of spectrum, i.e. the spectrum of visible light and NIR (near infrared light) that allows you to measure and describe how various...Weather station - temperature and humidity meter + external probe Uni-T A12T
Wireless weather station in white, model A12T of Uni-T measures the temperature and humidity in real time and displays the information on a large LCD screen. The device...Grove - infrared thermometer OTP-538U IR
Module from the Grove series, based on a sensor OTP-538U which, to measure the temperature, is using the analysis of infrared radiation in the range from -10 °C to 100 °C. It...DFRobot Gravity - MLX90614-DCI IR thermometer - non-contact
Non-contact temperature IR sensor MLX90614-DCI. It is used for measurement of IR radiation and does not require direct touch. It communicates through an I2C interface.MS8607 - Pressure Humidity Temperature PHT Sensor I2C STEMMA QT/Qwiic - Adafruit 4716
Adafruit PHT pressure, humidity and temperature sensor. Compatible with Arduino, Metro, Feather and Raspberry Pi. Powered from 3.3 V to 5 V with I2C interface and STEMMA...Gravity - connection cable set - male plug PH2.0 - 30cm - 10pcs. - DFRobot FIT0897
A set of connecting cables equipped with a connector compliant with the Gravity standard and a 3-pin PH2.0 male goldpin connector. The cables were manufactured by DFRobot, they...QR code scanner - STM32F030 - Unit extension module - M5Stack U173
QR code scanner module in the form of a Unit extension from M5Stack, enabling reading of one-dimensional and two-dimensional codes . Equipped with a CMOS capture sensor with...SparkFun Qwiic Thermocouple Amplifier - MCP9600 - with screw connector - SparkFun SEN-16295
High accuracy thermocouple amplifier module that enables the built-in MCP9600 chip. It uses the I2C communication interface via the Qwiic connector. It enables temperature...VL53L1X time-of-flight - distance sensor - 4m - Waveshare 14929
The VL53L1X distance sensor measures up to 4 m at a speed of up to 50 Hz . The system uses Time-of-Flight technology and uses the I2C interface for communication. The...I2C / UART distance and gesture sensor - 30cm - SparkFun SEN-13162
Module with sensor which enables determination of the distance of the object in two axes X and Z, and hand gestures. With this sensor, you can control the device, for example,...- Sale
- SPECIAL OFFERS
Gravity - RS485 to UART signal converter - DFRobot DFR0845
Module converting transmission signal from RS485 protocol to UART serial interface. It has a built-in TDH541S485H chip. It is compatible with most controllers, including...
