Attention! The sale of the product has been completed. Check otherdevices in this category. |
Description
Orange Pi2G-IOTminicomputer with a powerful32-bitARM CortexA5 32-bitprocessor.The board has256 MB DDR2 RAM, WiFi,Bluetooth,one USBHostslot, 1x micro USB OTG, 40 GPIO,microSDand SIMcard connectors. Enables connection withGSM / GPRSnetwork. Works withUbuntu, Android, Debian and Raspbiansystems.
The device has 1 USB port, WiFi, Bluetooth and many more.
What do you need to run Orange Pi minicomputer?
- MicroSD memory card- the media on which the operating system will be installed.
- Power supply unit- with 5 V output voltage and microUSB connector
- Enclosure- protects the minicomputer from external conditions
- Mouse and keyboard- to control and enter data into the device
Additional accessoriesare also available in our shop.
Operating system
Orange Pi works with Ubuntu and Android systems and systems known from Raspberry Pi. The device can be a microSD card with a capacity of up to 64 GB.
Operating systems can be downloaded fromthe manufacturer's website. Installation of the system is very easy -check our manual! |
Orange Pi 2G-IOT - top view
Communication
Orange Pi has basic communication interfaces, which can be found in PC-class office computers. In addition to the previously mentioned audio and video interfaces, the user has at his disposal:
- SIM connector- possible communication in GSM / GPRS standard
- One USB connector and one microUSB OTG socketto connect e.g. mouse, keyboard, WiFi card or flash drive. If it turns out that there are too few sockets, you can increase their number usingan external USB HUB.
- Built-in WiFi and Bluetooth module- Realtek for wireless communication, there is also an antenna on the board.
- GPIO x 40 pin- general purpose outputs/inputs that can be used to operate LEDs, buttons, motor controllers. Among them there are pins supporting interfaces: I2C, SPI and UART.
- microSD slot- slot for a microSD memory card, on which the operating system can be installed.
- 3.5 mm jack output- to connect headphones, speakers or analog video.
- built-in microphone- enables sound recording and e.g. making calls.
- CSI input- to connect a dedicated camera.
- LCD output- to connect a screen.
Power supply .
The system uses the microUSB connector as its power source. The manufacturer recommends that the voltage given on the connector should be 5.0 V, while the current capacity of the power supply used should be at least 2.0 A (the manufacturer recommends 3.0 A). In our offer you will find asuitable power supply.
Specification
Useful links |