Product description: HPCB 30:1 motor
Polol's small, lightweight yet powerful motors are used by robot constructors as driving units. The units can be supplied with voltage up to 9 V, the useful power is above 3 V. The optimum voltage at which the power to strength ratio is best is 6 V.
Polol HPCB motor specification 30:1
|
Supply voltage: |
from 3 V to 9 V |
|
Unloaded current (6 V): |
120 mA |
|
Current at stopped shaft (6 V): |
1600 mA |
|
Speed without load (6 V): |
1000 rpm |
|
Torque (6 V): |
0.6 kg*cm (0.059 Nm) |
|
Gear ratio: |
29.86:1 |
|
Brushes: |
Carbon brushes, high strength |
|
Shaft diameter: |
3 mm |
|
Body dimensions: |
24 x 10 x 12 mm |
|
The weight: |
10 g |
|
Two-sided shaft: |
NO |
|
This version has carbon brushes with increased strength. |
Engine dimensions
The motor body is a 26 x 12 x 10 mm cuboid. The gearbox is 9,27 mm long. There is a 3 mm D-shaped shaft at the output. Total weight is about 10 g.
The drawing shows the dimensions of the Polol micro motor with gearbox.
Accessories
We offer a range of accessories that work with Polol's micro motors:
- Fixings
Special fixtures in white orblackhave been designed for mounting the motors. Anextendedversion is also available, as well asan aluminium version withincreasedstrength.
In the case of micro 1000:1 and 1000:1 HP motors, the mountings do not cover the entire gearbox.
- Wheels, crawlers, hubs,Encoders
Our offer also includes wheelsand tracks,matched to themicro engine shafts of Polol. There is also a special version of wheels with speed measuring encoders available. Installation of non-standard wheels is facilitated by adapters.
- Engine drivers
Direction and speed control are provided by DC motor controllers. In the offer there are available bothintegratedcircuitsforself-soldering and ready to connect, cooperating with sets (e.g. Arduino) modules
There are many otherenginesin the shop's offer.
Useful links |
