The Grove system from Seeedstudio is an open-source plug-and-play component set that simplifies electronics design and prototypes by offering a wide range of sensors and parts. The modules can be plugged without soldering to a Base Shield or a Mega Shield, thus, you can connect them to your Arduino or compatible board very quickly and easily. Prototyping has never been easier ever before. Grove allows you to say goodbye to soldering or using a breadboard for all prototyping needs. You can simply start using Grove modules just by plug and play. Grove is compatible with many development platforms including Arduino, Raspberry Pi, Beaglebone, and more. Each Grove module comes with clear documentation and demo code to help you get started very quickly and easily. With Grove modules, you can start a wide variety of projects at once! At Botland.store, you will find a large selection of Grove series modules at the best prices. These modules will be the perfect solution for both professionals and beginners. At our store, you will find Grove Base Kit for Raspberry Pi, Grove Inventory Kit for children, and single Grove sensors. We provide reasonable prices, fast shipping, and professional guidance.
- Reduced price
- On sale
Air quality / dust sensor PM1.0 / PM2.5 / PM10 - PMS3003 - 5 V UART
Index: DNG-13442
- Reduced price
- On sale
Feather 32u4 Basic Proto - compatible with Arduino - Adafruit 2771
Index: ADA-05059
- On sale!
- On sale
Grove system
Loading...
Grove - female-female 4-pin - 2mm / 20cm cable
Cable with two Grove standard connectors. It has 4 pins with a 2 mm grid, the diameter of the wire is 26 AWG. They are used to connect Grove sensors to the base cover. The...
Index: SEE-15451
Index: SEE-15451
Grove - universal 4-pin connector
Universal 4-pin connector for soldering in the PCB. The distance between the pins is 2 mm. Compatible with, among others, the wires from the Grove series. The package contains...
Index: SEE-13343
Index: SEE-13343
Grove - a set of 5 wires 4-pin 2mm - male cables 2.54mm/20cm
A set of five wires 4-pin Grove male wires 2.54 mm. They are used to connect Grove sensors with boards incompatible with the Grove raster 2.54 mm wires, for example Arduino.
Index: SEE-04402
Index: SEE-04402
Grove - 125kHz RFID reader with antenna - Seeedstudio 113020002
Easy to use module of RFID reader with UART and Wiegand interface. Works with UEM4100 RFID modules. The kit includes antenna which allows you to communicate in a range up to 7...
Index: SEE-04417
Index: SEE-04417
Grove - sensor / probe for measuring soil moisture v1.4 - analog
The sensor allows you to determine the moisture level of the soil. It is supplied with the voltage from 3.3 V to 5 V. The output has analog voltage, which increases its value...
Index: SEE-11338
Index: SEE-11338
Grove - set of 5 female-female 4-pin - 2mm/50cm with latch
A set of five 4-pin Grove wires. They are used to connect sensors with Grove Base Shield v2. The length of the cable is 50 cm. Version with a latch.
Index: SEE-04399
Index: SEE-04399
Grove - ultrasonic distance sensor 3-350cm
Ultrasonic sensor operating in the range from 3 cm to 350 cm. It is powered with voltage of 5 V. The output is a signal, duration of which is proportional to the measured...
Index: SEE-11360
Index: SEE-11360
Grove - Module 4x 7-segment display - digital interface
Grove series four-character 7-segment display module. It allows displaying four digits along with colon and some letters in red. Based on TM1637 chip, it is compatible with...
Index: SEE-11293
Index: SEE-11293
Grove - a set of 5 female-female 4-pin - 2mm/20cm cables without latch
A set of five 4-pin cables Grove, raster 2 mm. They are used to connect Grove sensors with Base Shield Board. Cable length is 20cm. Version without a latch.
Index: SEE-04395
Index: SEE-04395
Grove - LM358 Ambient Light Sensor v1.2
Module from the Grove series is equipped with a sensor LM358. The sensor allows to determine the intensity of the light and reflects the analog voltage signal back to Arduino....
Index: SEE-11330
Index: SEE-11330
Grove - a set of 5 female-female 4-pin - 2mm/5cm cables with a latch
A set of five 4-pin wires Grove. They are used to connect Grove sensors with Base Shield Board v2. Wire length is 5 cm. Version with lock.
Index: SEE-04397
Index: SEE-04397
Grove - mini PIR motion sensor
The motion sensor, type PIR with the interface compatible with the Grove series. The object detection is indicated digitally - through the high status on SIG pin. The range of...
Index: SEE-13336
Index: SEE-13336
Grove - precipitation / water sensor
The Grove sensor used to detect the presence of water or its quantity. It is powered with the voltage of 5 V. It can be used to detect the presence, level or absence of water.
Index: SEE-11363
Index: SEE-11363
Grove - 10kΩ linear rotary potentiometer - top connector
Potentiometer 10 kOhm with linear rotary. It as a 300° range of rotation. It h as a 4-pin Grove connector on the side of the handle.
Index: SEE-04433
Index: SEE-04433
Relay module with Grove connector in 1.2 version. It allows you to control the executive elements by cutting off or supplying power. For proper operation it requires a 5 V...
Index: SEE-11347
Index: SEE-11347
Grove - SW-420 vibration sensor
Module with high sensitivity vibration sensor from Grove series. When the sensor is at rest, the output of the output transmitted is at a constant high signal (high) and the...
Index: SEE-12917
Index: SEE-12917
Grove - LCD display 2x16 characters with backlight (White on Blue)
Monochrome 2 x 16 character LCD display with high brightness backlight from Grove. The module communicates with the control board via the two-row I2C bus. The screen is powered...
Index: SEE-14736
Index: SEE-14736
Grove - temperature and humidity sensor DHT11 - Seeedstudio 101020011
The sensor of temperature and humidity DHT11 from the Grove series. The output is a digital signal. The temperature measurement range is from 0 °C to 50 °C and...
Index: SEE-12378
Index: SEE-12378
Grove - StarterKit v3 PL - starter package for Arduino
Grove StarterKit v3 introduces the world of IoT (Internet of Things) for Arduino boards. The kit includes light, touch, temperature, servo, display and many other sensors....
Index: SEE-13546
Index: SEE-13546
Capacitive touch sensor based on the module TTP223-b is supplied with the voltage from 2 V to 5.5 V, the output is a digital signal.
Index: SEE-04431
Index: SEE-04431
- Reduced price
- On sale
Grove - push button with backlight - blue
Module from the Grove is equipped with a button with a blue LED. Powered with the v oltage from 3.3 V to 5 V. It has the Grove connector that allows for the direct...
Index: SEE-13660
Index: SEE-13660
Grove - Buzzer - module with active buzzer
Active buzzer module from Grove. It e mits a uniform tone after taking a high position. When using PWM, it can generate different sounds and effects. The power voltage from 4...
Index: SEE-11298
Index: SEE-11298
Grove - push button with backlight - yellow
Module from the Grove is equipped with a button with a yellow led. It is powered with the v oltage from 3.3 V to 5 V. It has the Grove connector that allows for the direct...
Index: SEE-12596
Index: SEE-12596
Module from the Grove series, based on the LM386 system and electret microphone. It can be powered with any voltage from 4 V to 12 V. The output is an analog signal. The sensor...
Index: SEE-11350
Index: SEE-11350
What the Grove system is?
Grove is a modular, standardized 4-pin connector-based prototyping system for communicating with different types of interfaces. No need to solder or wire a circuit, it's an ideal solution for beginners. With Grove, you can also prototype IoT quickly.
Grove modules have been designed for education and rapid prototyping. Grove is compatible with Arduino, Seeeduino, or other boards and it can communicate with the external environment without soldering. If you’re looking for Grove ready-to-use electronic sensors and modules, visit our online shop. Botland.store offers various Grove systems, practical for developing applications around programmable cards. Each module is delivered with a mini cable fitted with connectors. It’s possible to connect several Grove modules to Arduino or Raspberry Pi.
In this category, you will find a large selection of Grove products. Every module has one function, such as touch sensing, creating an audio effect, or so on. Just plug the modules you need to the base shield to test your idea! Seeedstudio offers a catalog of more than 300 modules (sensors, actuators, display, communication, etc.). What is more, you do not need a base unit to connect to Grove modules. You can use an adapter (Grove to Pin Header Converter) to connect the pins of the Raspberry Pi or Arduino to the Grove connectors.
Grove Starter Kit for Arduino
These days, microelectronics is becoming more and more popular. Now, creative people who are beginners regarding electronics can design simple projects using Arduino. If you want to jumo into the world of Arduino easily, you can buy Grove Starter Kit for Arduino. This kit contains parts such as the touch sensor, angle sensor (potentiometer), temperature sensor (NTC), light sensor, microphone. The purpose of buying Grove kit is to be able to connect a collection of small modules of sensors and controls to an Arduino board. There is no need for soldering, everything goes through a signal distribution board.
Grove kits - a perfect solution for beginners
If you are new to electronics and programming, Grove kits will meet all your expectations, allowing you to create your first projects. Why Grove is so popular among Arduino users?
Below we present a few advantages of Grove series:
- Out-of-the-box system (Grove can be used immediately after unpacking, without long preparation)
- fast and safe assembly of the components
- Grove allows concentration on the essentials or on the project
- large selection of modules - create anything you wish
- suitable for children and teenagers
As you can see, Grove modules can be a great solution for designing your own projects. At Botland.store, you will find various Grove products at reasonable prices. We guarantee, that all products available at our catalog are high-quality. In case you have any doubts or questions, please don’t hesitate to contact us. We will always provide you with professional guidance.
Grove Base Shield
To ensure the connection of the individual Grove modules, for example to the Arduino-Uno, a special Grove-Base-Shield is required, which is provided with most of the sets. It works as an interface between the Arduino and the Grove modules.