Grove System - in the field of computer science and products for robotics enthusiasts, embedded systems are steadily gaining popularity among professionals and hobbyists alike. Grove Modules from Seeed Studio are another attractive option in this department. They let you built devices from scratch without having to solder the components. Kids will love it as it is safe for them to use and they will have lots of fun while learning programming in the process!
- Reduced price
- Promotion
- Reduced price
- Promotion
Mono Amplifier Kit with Power Switch and status LED - Kitronik 2173
Index: KTR-16878
- Reduced price
- Promotion
- Reduced price
- Promotion
Grove modules
Loading...
Grove - a set of 5 wires 4-pin 2mm - male cables 2.54mm/20cm
A set of five wires 4-pin Grove male wires 2.54 mm. They are used to connect Grove sensors with boards incompatible with the Grove raster 2.54 mm wires, for example Arduino.
Index: SEE-04402
Index: SEE-04402
Grove - universal 4-pin connector
Universal 4-pin connector for soldering in the PCB. The distance between the pins is 2 mm. Compatible with, among others, the wires from the Grove series. The package contains...
Index: SEE-13343
Index: SEE-13343
Grove - a set of 5 wires 4-pin 2mm - female wires 2.54mm/30cm
A set of five 4-pin Grove female wires. They are used to connect Grove sensors with a board incompatible with the Grove raster 2.54 mm wires, such as Raspberry Pi. Length is...
Index: SEE-04401
Index: SEE-04401
Grove - Base Shield v2 - Shield for Arduino
Shield for Arduino, which extends the capabilities I/O pins. Designed for modules and sensors from the Grove series. It has 4-pin connectors, and all the outputs known from...
Index: SEE-04440
Index: SEE-04440
Grove - female-female 4-pin cable - 100cm
4-pin Grove cable . Used to combine development modules of the series M5Stack with the Unit modules. Model has 4 lines : o ne power and ground line each...
Index: MSS-18097
Index: MSS-18097
Grove - Module 4x 7-segment display - digital interface
Grove series four-character 7-segment display module. It allows displaying four digits along with colon and some letters in red. Based on TM1637 chip, it is compatible with...
Index: SEE-11293
Index: SEE-11293
Grove - set of 5 female-female 4-pin - 2mm/50cm with latch
A set of five 4-pin Grove wires. They are used to connect sensors with Grove Base Shield v2. The length of the cable is 50 cm. Version with a latch.
Index: SEE-04399
Index: SEE-04399
Grove - set of 5 female to female 4-pin - 10 cm
A set containing 5 G rove wires with a length of 10 cm , ended on both sides with a 4-pin plug. The cables can be used to connect M5Stack main modules with Unit...
Index: MSS-18094
Index: MSS-18094
Relay module with Grove connector in 1.2 version. It allows you to control the executive elements by cutting off or supplying power. For proper operation it requires a 3.3 V to...
Index: SEE-11347
Index: SEE-11347
Grove - LM358 Ambient Light Sensor v1.2
Module from the Grove series is equipped with a sensor LM358. The sensor allows to determine the intensity of the light and reflects the analog voltage signal back to Arduino....
Index: SEE-11330
Index: SEE-11330
Grove - female-female 4-pin cable - 200cm
Grove-type 4-pin cable . Model used to combine M5Stack series development modules with Unit type extensions. The cable consists of 4 lines : power...
Index: MSS-18098
Index: MSS-18098
Grove - 125kHz RFID reader with antenna - Seeedstudio 113020002
Easy to use module of RFID reader with UART and Wiegand interface. Works with UEM4100 RFID modules. The kit includes antenna which allows you to communicate in a range up to 7...
Index: SEE-04417
Index: SEE-04417
Grove - ultrasonic distance sensor 3-350cm
Ultrasonic sensor operating in the range from 3 cm to 350 cm. It is powered with voltage of 5 V. The output is a signal, duration of which is proportional to the measured...
Index: SEE-11360
Index: SEE-11360
Grove - sensor / probe for measuring soil moisture v1.4 - analog
The sensor allows you to determine the moisture level of the soil. It is supplied with the voltage from 3.3 V to 5 V. The output has analog voltage, which increases its value...
Index: SEE-11338
Index: SEE-11338
Grove - 4-pin screw connection
Module from the Grove series with a 4-pin screw connection of 3.5 mm. It is designed to connect the cables with diameter from 0.2 mm to 0.8 mm for the microcontroller. It has...
Index: SEE-11348
Index: SEE-11348
Grove - a set of 5 female-female 4-pin - 2mm/20cm cables with a latch
A set of five 4-pin Grove wires. They are used to connect sensors with Grove Base Shield v2. Wire length is 20 cm. Version with a latch.
Index: SEE-04400
Index: SEE-04400
Grove - I2C hub - 6 ports - Seeedstudio 103020272
I2C hub extending the Base Shield overlay or Seeeduino module with 5 additional I2C ports (1 port serves as I2C input). The module dimensions are 40 x 20 mm.
Index: SEE-15856
Index: SEE-15856
Grove - universal 4-pin angle connector 90° - 10pcs.
Universal 4-pin Grove connector designed to be soldered into PCBs. Raster is 2 mm, the pins are bent at 90°. The connectors are compatible with Grove cables. Set includes 10...
Index: SEE-15452
Index: SEE-15452
Grove - a set of 5 female-female 4-pin - 2mm/5cm cables with a latch
A set of five 4-pin wires Grove. They are used to connect Grove sensors with Base Shield Board v2. Wire length is 5 cm. Version with lock.
Index: SEE-04397
Index: SEE-04397
Grove - a set of 5 female-female 4-pin - 2mm/20cm cables without latch
A set of five 4-pin cables Grove, raster 2 mm. They are used to connect Grove sensors with Base Shield Board. Cable length is 20cm. Version without a latch.
Index: SEE-04395
Index: SEE-04395
Grove - a set of 5 female-female 4-pin - 20cm cables
A set of five 4-pin Grove cables. They are used to connect M5Stack series developer modules with caps and Unit modules. The cable has 4 lines: two for data...
Index: MSS-18095
Index: MSS-18095
IR transmitter from Grove, emitting light with a wavelength of 940 nm. It works with a supply voltage from 3.3 V to 5.0 V. Sensor provides a signal to a distance of 10...
Index: SEE-04418
Index: SEE-04418
Grove - mini PIR motion sensor
The motion sensor, type PIR with the interface compatible with the Grove series. The object detection is indicated digitally - through the high status on SIG pin. The range of...
Index: SEE-13336
Index: SEE-13336
Grove - 10kΩ linear rotary potentiometer - top connector
Potentiometer 10 kOhm with linear rotary. It as a 300° range of rotation. It h as a 4-pin Grove connector on the side of the handle.
Index: SEE-04433
Index: SEE-04433
See also
- Led motion detectors
- Optical sensors
- Twilight sensors
- Resistance sensors
- Door sensors
- Piezoelectric sensors
- RPM sensors
- Oxygen sensors
- Tilt sensors
- Accelerometers
- Inductive sensors
- Hall effect sensors
- Alarm sensors
- 9DoF IMU sensors
- Pressure sensors
- Air quality sensors
- Sound sensors
- Gesture sensors
- Limit switches
- Sensors of light and color
- Gas sensors
- Magnetic sensors
- Medical sensors
- Pressure sensors
- Sensors odbiciowe
- Distance sensors
- Inductive contactless sensors
- Weather sensors
- Liquid level sensors
- Current sensors
- Flow sensors
- Motion sensors
- Temperature sensors
- PT100 temperature probes
- Humidity sensors
- Fingerprint readers
- Encoders
- Photoresistors
- Phototransistors
- IR receivers
- Magnetometers
- Gyros
- Sensor sets
- Gravity modules
In our Botland online store you will find over 150 various modules that will help you make your ideas come to life! Simple interface and adapters are fully compatible with single-board computers such as Arduino and Raspberry Pi. They offer multiple possible outcomes that are completely dependent on you. From beginning to an end, you are in control of how complex or how simple your project will be.
What are Grove systems?
Grove is modular system for designing and building your very own prototypes of electronic devices. It is well-known for its use of standardized connectors which are mainly Molex and ARK. The system is based on modular blocks that are linked with each other by the use of compatible connectors which eliminates the need for soldering and breadboards. It simplifies the process and makes learning all the more enjoyable while exploring and tinkering with different parts of the Grove system. Thanks to all of this, you can build various functional projects that can look as professional or as quirky as you like.
Generally speaking, Grove system consists of a core, that is a base overlay, and branches in the form of one or more overlays together with a module that is controlled from the base with compatible connectors. Base overlay is usually equipped with a microprocessor, it allows for an easy plug-in with any inlet and outlet of the controlling module. Every Grove module is designed for one specific function only, for example it can control one small button or a more advanced heart rate sensor.
Grove systems are a perfect option for beginners!
With all of the novice users in mind, Seeed Studio developed Grove starting kits that are ideal for those who are taking their first steps in programming and robotics. The kits include: base module, light and temperature sensors, connectors, interface and other accessories. Producers of the series share a list of module compatibility with embedded system platforms. By using Grove Protoshield you can build custom device according to your personalized design, for example an advanced system for measuring voltage, electric current and power. Connectors were specifically designed in order to prevent reverse current which protects the modules from injury.
The one thing that you have to pay special attention to before activating the modules is a voltage of power supply. Voltage that is too high or too low can have a negative impact on how your device works, it can even lead to a system failure. The Grove series is charged with a voltage of +3,3V or +5,0V depending on the individual specification of modules. They are compatible with Arduino and Raspberry Pi - you only have to connect it with a dedicated adapter that is going to enable you to type in commands, for example via the UART or I2C interface.
DIY projects for your home using Grove
With the help of Grove starter kit you can build a lot of home improvements that will make your everyday life easier and more comfortable. For a relatively quick project you can try building a DIY smart monitoring device. It will provide you with a couple of interesting data about your environment such as temperature, level of humidity and soil moisture. It can also record sounds!
If you are looking for something more complicated, why don’t you challenge yourself to make an IoT humidifier? This smart machine can be programmed to sense a current level of humidity and once it assesses that it is too low, it will start the humidification process. Or, if you prefer it that way, it can be controlled manually by pressing a button whenever you feel like air is too dry. All of the data will be recorded and sent to the cloud so that you can have an easy access to it.