Simple High-Power 24v12 - USB 40V/12A motor driver - assembled - Pololu 1378

Index: PLL-02001 EAN: 5904422330477

Easy to use single-channel direct current motor controller. It communicates through the USB port of the computer, UART TTL interface, analogue signal or RC radio interface. Power supply voltage ranges from 5.5 V to 40 V. Continuous current up to 12 A.

Simple High-Power 24v12 - USB 40V/12A motor driver - assembled - Pololu 1378
€189.50
€154.07 tax excl.
Waiting time: 4-6 weeks
Only on request
PayPal payment
Manufacturer: Pololu
Compatibility: Arduino Raspberry Pi

Product description: Simple High-Power 24v12 - USB 40V/12A motor driver - assembled.

The controller allows you to control a DC motor supplied from 5.5 V to 40 V with a current draw of up to 12 A. HighPower system supports 4 control modes: USB, serial TTL, analog voltage and RC radio signal. The computer application allows you to easily configure the module.

The manufacturer provides a detaileduser guide.

Main features of the engine driver

  • Easy to use bidirectional DC motor controller
  • Power supply: from 5.5 V to 30 V (18v7, 18v15, 18v25 versions) and up to 40 V (24v12, 24v23)
  • From 7 A to 25 A continuous current depending on version
  • Four communication protocols:
    • USB - direct connection to a computer
    • TTL - serial interface to connect e.g. with a microcontroller
    • Radio signal (RC)
    • Analog input (0 - 3.3 V) - connection of potentiometer or joysticks
  • Simple configuration via USB (Windows 7, Vista, XP, Linux )
  • Detailed information can be found inthe user manual

Program Polulu simple motror control center

Polulu simple motor control center program.

USB motor controller specification 40 V / 12 A

  • Motor supply voltage: 5.5 V - 40 V
  • Continuous current: up to 12 A
  • Maximum PWM signal frequency: 21.77 kHz
  • Supply voltage of the logical part: up to 3.3 V
  • Digital inputs tolerate 5 V
  • Number of channels: 1
  • Dimensions: 53.3 x 27.9 x 12.7 mm
  • Weight: 14 g

For details, please refer to theuser manual.

For systems using 24V supply voltage, we recommend using 24v12or24v23 controller. When using the 18v17,18v15and 18v25 controllers,there isa danger that the voltage will at some moments exceed the permissible 24V value (e.g. when the batteries are fully charged), which may cause permanent damage to the system.

Additives:

  • Instructionswith sample connections and source codes
  • Adjustable starting and maximum speed
  • Option to prevent the engine from starting up accidentally
  • Adjustable PWM frequency from 1 kHz to 22 kHz
  • Can be switched off at too low a supply voltage
  • Error indication LED

przykładowy schemat podłączenia sterownika silnika

Example of controller connection diagram.

Communication

HighPower controllers can communicate via three interfaces:

USB port of the computer

  • Communication with a computer via virtual COM port
  • Examples of codesin C#, Visual Basic, .NET, C++
  • Optional safeguards (CRC control, timeout)
  • Automatic baud rate detection (1200 bps to 500 kbps)

Remote Control - modeling equipment

  • Frequencies 10 to 333 Hz
  • Adjustable parameters for RC signal
  • Two channels
  • Possibility to power the receiver from the BEC system (BEC jumper)

Analogue interface

  • Resolution: 12 bits
  • Voltage range: 0 to 3.3 V
  • Two analogue channels

Exits

List of regulators


18v7

18v15

24v12

18v25

24v23
Max voltage: 30 V 30 V 40 V 30 V 40 V
Recommended voltage: 24 V 24 V 34 V 24 V 34 V
Max. continuous current: 7 A 15 A 12 A 25 A 23 A
Width: 28 mm 28 mm 28 mm 31 mm 31 mm
Length: 53 mm 53 mm 53 mm 58 mm 58 mm
Weight*: 7 g 7 g 7 g 12 g 12 g

* - Weight without connectors.

Voltage to 5.5 V
Voltage from 40.0 V
Current 12.0 A
Channels 1
Package width 0 cm
Package weight 0.015 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: