Tic T825 - USB stepper motor driver 45V / 2.5A - Pololu 3131
Index: PLL-09467
- Reduced price
- Promotion
Air quality gauge Benetech GM8803 PM2.5 and PM10 with display
Index: BNT-10775
- Reduced price
- Promotion
HDMI Cable shielded CU 48Gb/s - 3m - black - Akyga AK-HD-30S
Index: RCO-23654
- Reduced price
- Promotion
Mono Amplifier Kit with Power Switch and status LED - Kitronik 2173
Index: KTR-16878
- Reduced price
- Promotion
- Reduced price
- Promotion
- On sale!
- Promotion
Monostable ON-OFF switch - PBW-16BPD - 2A 250V - flat red point
Index: AKS-10816
- Reduced price
- Promotion
MINICOMPUTERS - Strona 16
Loading...
Pibow Zero 2 W - case for Raspberry Pi Zero 2 W - violet - PiMoroni PIM595
The Pibow case is designed exclusively for the Raspberry Pi Zero 2 W minicomputer , it does not work with previous versions of the Zero. It consists of four unique layers...
Index: PIM-20894
Index: PIM-20894
Display HAT Mini - HAT with IPS LCD 2'' 320x240px for Raspberry Pi - PiMoroni PIM589
The Display HAT Mini from Pimoroni is a display overlay designed for any 40-pin version of the Raspberry Pi. The bright, 18-bit , 2" IPS display with a resolution of 320 x...
Index: PIM-20895
Index: PIM-20895
Pico Display Pack 2.0 - IPS LCD 2'' 320x240px display for Raspberry Pi Pico - PiMoroni PIM850
The Pico Display Pack 2.0 from Pimoroni is a display overlay module for the Raspberry Pi Pico. The 18-bit 2" IPS display with a resolution of 320 x 240 px features good...
Index: PIM-20896
Index: PIM-20896
Teensy 4.1 ARM Cortex M7 - Arduino compatible - SparkFun DEV-16771
Teensy 4.1 manufactured by SparkFun. It features a dual-core ARM Cortex-M7 processor clocked at 600 MHz with an NXP iMXRT1062 chip. The board's flash memory is 8 MB, which...
Index: SPF-20917
Index: SPF-20917
Feather M4 Express - board with ATSAMD51 microcontroller - Adafruit 3857
Feather M4 Express is a board manufactured by Adafruit. It is equipped with an ATSAMD51 microcontroller with a Cortex M4 processor running at 120 MHz . It has 512 kB of...
Index: ADA-21018
Index: ADA-21018
Feather nRF52840 Express Bluefruit LE - Arduino compatible - Adafruit 4062
Feather nRF52840 Express with Bluetooth wireless communication - Bluefruit LE. This is a board manufactured by Adafruit, based on the nRF52840 chip. It is equipped with ARM...
Index: ADA-21017
Index: ADA-21017
Adafruit Cyberdeck HAT - GPIO adapter for Raspberry Pi 400 - Adafruit 4863
The Cyberdeck board from Adafruit is equipped with two 40-pin connectors , one straight and one angled , which are used to lead the pins out of the Raspberry Pi 400...
Index: ADA-21041
Index: ADA-21041
ItsyBitsy M0 Express - board with ATSAMD21 microcontroller - Adafruit 3727
ItsyBitsy - compact board compatible with Arduino. It is equipped with an efficient ATSAMD21 microcontroller with an ARM Cortex M0 processor, operating at a frequency of...
Index: ADA-21058
Index: ADA-21058
Adafruit PyRuler - Electronic Ruler with CircuitPython - Adafruit 4319
The 152 x 25 mm PCB with the standard FR4 thickness is a gold-plated ruler equipped with the most popular component packages that can be found in electronics. In addition...
Index: ADA-21045
Index: ADA-21045
Adafruit QT Py - board with SAMD21 microcontroller - Adafruit 4600
The small size Adafruit QT Py board is based on the popular SAMD21 chip . Its dimensions are the same as Seeed Xiao - 23.5 x 17.5 x 3.5 mm. The ATSAMD21E18 microcontroller...
Index: ADA-21051
Index: ADA-21051
IR Hat + remote control - Raspberry Pi overlay
Shield which makes it possible to remotely switch on / off the minicomputer Raspberry Pi. The kit also includes a remote control.
Index: MOD-09868
Index: MOD-09868
Traffic pHAT - LED hat for Raspberry Pi Zero - Pi Supply PIS-1778
Shield for Raspberry Pi equipped with three large LEDs - 1x red , 1x yellow and 1x green . It can be programmed in any language for the Raspberry Pi, does not require...
Index: SUP-21344
Index: SUP-21344
Adafruit QT Py ESP32-S2 WiFi - WiFi module with STEMMA QT/Qwiic connector - Adafruit 5325
Small size QT Py module created by Adafruit. It is equipped with a single-core ESP32-S2 system clocked at 240 MHz, 4 MB Flash memory and 2 MB PSRAM. ESP32-S2 enables...
Index: ADA-20791
Index: ADA-20791
SparkFun Thing Plus - ESP32 WROOM (U.FL) - module with WiFi and Bluetooth - SparkFun WRL-17381
The module produced by SparkFun and equipped with the ESP32 WROOM system, with the possibility of wireless WiFi and Bluetooth communication. SparkFun Thing Plus has a...
Index: SPF-21149
Index: SPF-21149
SparkFun Qwiic pHAT v2.0 - hat for Raspberry Pi - SparkFun DEV-15945
SparkFun Qwiic pHAT v2.0 HAT shield for Raspberry Pi, manufactured by SparkFun. The pin expander improves the prototyping process by adding four connectors of the Qwiic...
Index: SPF-21165
Index: SPF-21165
SparkFun Qwiic SHIM for Raspberry Pi - SparkFun DEV-15794
SparkFun Qwiic SHIM is a small module applied to the GPIO pins of Raspbery, with which you can easily equip a minicomputer with a Qwiic connector. The module is plugged...
Index: SPF-21163
Index: SPF-21163
reComputer J1010 - Nvidia Jetson Nano 4GB RAM + 16GB eMMC - Seeedstudio 110061362
Jetson reComputer is based on the Nvidia Jetson Nano module with advanced artificial intelligence (AI) systems with 4 GB of RAM and 16 GB of eMMC memory . A series of...
Index: SEE-21443
Index: SEE-21443
The module is equipped with a single-core ESP32 - C3 RISC-V processor with a clock speed of up to 160 MHz. It has 400 KB of RAM , 364 KB of ROM, 4 MB of Flash and 8 KB of...
Index: DFR-21227
Index: DFR-21227
Lens CS-Mount 8mm - manual focus - for HQ Raspberry Pi camera - ArduCam LN039
Lens for Raspberry Pi camera in HQ version and V1 / V2 camera. It allows you to manually control the sharpness of the image , thanks to which it enables precise adjustment of...
Index: ACM-21096
Index: ACM-21096
Raspberry Pi PoE HAT - for Raspberry Pi 4B/3B+ - IEEE 802.3af - Uctronics U6241
Shield for Raspberry Pi working with the use of PoE technology , which allows you to power the raspberries via an Ethernet cable. It complies with the IEEE 802.3af standard....
Index: ACM-21105
Index: ACM-21105
Simply Servos Board - servo controller - 8 channels - for Raspberry Pi Pico - Kitronik 5339
Simply Servos Board is an overlay for the Raspberry Pi Pico, which allows you to control 8 servos at the same time. It is powered with the voltage ranging from 3 V to 12 V....
Index: KTR-21403
Index: KTR-21403
Feather ESP32 V2 w.FL Antenna - WiFi module - compatible with Arduino - Adafruit 5438
The Feather module is based on the ESP32 chip with a dual -core Xtensa Tensilica LX6 processor clocked at 240 MHz and WiFi / Bluetooth LE wireless communication. The ESP32...
Index: ADA-21468
Index: ADA-21468
Raspberry Pi DIN Rail Mount - for Arduino, Raspberry Pi - Uctronics U6179
The Raspberry Pi DIN Rail Mount is a washer in the form of a mounting bracket that allows you to mount SBCs on a DIN rail to create an array of Raspberry Pi servers, home...
Index: ACM-21102
Index: ACM-21102
Feather ESP32-S3 - WiFi, GPIO module - compatible with Arduino - Adafruit 5323
Another Adafruit board from the Feather series, The module is based on the ESP32-S3 system, equipped with 8 MB Flash memory , no built-in PSRAM memory. The dual-core...
Index: ADA-21464
Index: ADA-21464