Filter by
Price
0 2917
more (-5) ok clear
Manufacturers
more (530) ok clear
Filter

Promotion products

Recomendations

Products: 1113
Loading...

Adafruit Proximity Trinkey - USB APDS9960 Sensor Dev Board - Adafruit 5022

The module created by Adafruit is a combination of Adafruit Trinket M0 board and APDS9960 sensor. The sensor allows you to measure distance (proximity sensor), light, RGB and...
5.0 (1)
Index: ADA-20368
Index: ADA-20368
Shipping in 24 hours
Available
Regular price €13.90 Price €13.90

Adafruit ATtiny817 seesaw - STEMMA QT / Qwiic - Arduino compatible - Adafruit 5233

Board based on ATtiny817 chip clocked at 20 MHz with 8 kB of flash memory and 512 B of RAM. It is also a seesaw Adafruit module, an I2C converter that allows you to extend...
5.0 (1)
Index: ADA-20369
Index: ADA-20369
Shipping in 24 hours
Available
Regular price €6.90 Price €6.90

IO Expansion Board for Raspberry Pi Pico - DFRobot DFR0836

Pinout expander created by DFRobot for Raspberry Pi Pico . The board outputs all input / output (IO) pins of the Pico module to male and female p ins. Additionally, all pins...
5.0 (5)
Index: DFR-20372
Index: DFR-20372
Shipping in 24 hours
Available
Regular price €4.90 Price €4.90

Gravity - Expansion Board for Raspberry Pi Pico - DFRobot DFR0848

An expansion module made by DFRobot for the Raspberry Pi Pico board. It allows you to connect Gravity series sensors to the Raspberry Pi Pico module, in a simple way,...
4.9 (8)
Index: DFR-20373
Index: DFR-20373
Shipping in 24 hours
Available
Regular price €6.50 Price €6.50

Raspberry Pi 400 Expansion + cable - SB Components SKU21307

An adapter to put the GPIO pinouts of the Raspberry Pi 400 minicomputer in a more accessible place. The manufacturer of Raspberry Pi has placed the GPIOs on the Pi 400 in the...
5.0 (2)
Index: SBC-20381
Index: SBC-20381
Shipping in 24 hours
Available
Regular price €8.90 Price €8.90

Raspberry Pi 400 GPIO Adapter - SB Components SKU21239

GPIO adapter is designed to be used with Raspberry Pi 400 minicomputer. By default GPIO connectors on Raspberry Pi 400 are located under the keyboard, at 90° angle, which...
5.0 (2)
Index: SBC-20382
Index: SBC-20382
Shipping in 24 hours
Available
Regular price €7.50 Price €7.50

Serial Expansion HAT UART, GPIO SC16IS752 for Raspberry Pi - SB Components SKU14873

Serial expander in form of HAT overlay for Raspberry Pi minicomputers equipped with 40-pin GPIO connector. The overlay is based on SC16IS752 chip which extends Raspberry Pi...
5.0 (1)
Index: SBC-20406
Index: SBC-20406
Shipping in 24 hours
Available
Regular price €19.90 Price €19.90

Motor Driver HAT TB6612FNG - dual channel 12V/3A for Raspberry Pi - SB Components SKU21789

Overlay for Raspberry Pi equipped with 40-pin GPIO connector, including model 4B / 3B+ / 3B. HAT features a TB6612FNG dual channel DC motor driver, operating from 6 V to...
Index: SBC-20401
Index: SBC-20401
Shipping in 24 hours
Available
Regular price €20.90 Price €20.90

WiFi ESP8266 HAT with LCD 1,14'' 240x135px display for Raspberry Pi Pico - SB Components SKU21888

The overlay created by SB Components, allows to extend Raspberry Pi Pico module with wireless WiFi IEEE 802.11 b/g/n communication via ESP8266 chip. The chip can be...
Index: SBC-20404
Index: SBC-20404
Shipping in 24 hours
Available
Regular price €27.90 Price €25.11
  • Reduced price
  • Promotion

LCD 1,3'' 240x240px HAT for Raspberry Pi - SB Components SKU21864

The overlay has a 1.3" display with a resolution of 240 x 240 px . The LCD screen is capable of displaying a clear, colorful image in 65k RGB color palette. There are also...
Index: SBC-20403
Index: SBC-20403
Shipping in 24 hours
Available
Regular price €19.50 Price €19.50

Pico Zero Board - prototyping board for Raspberry Pi Pico - SB Components SKU21499

The Pico Zero Board is a pinhole board for prototyping your own circuits using the Raspberry Pi Pico module. The board features holes placed in 6 columns of 20 rows and a...
5.0 (1)
Index: SBC-20399
Index: SBC-20399
Shipping in 24 hours
Available
Regular price €3.50 Price €3.50

Pico Zero Expansion - prototyping board for Raspberry Pi Pico - SB Components SKU21505

The Pico Zero Expansion features pinouts for soldering a goldpin socket and plugging in the Raspberry Pi Pico , one row of 6 x 20 prototyping fields, and two rows of 8 x 20...
5.0 (1)
Index: SBC-20398
Index: SBC-20398
Shipping in 24 hours
Available
Regular price €5.50 Price €5.50

Pico Motor Driver HAT - 12V/0,6A for Raspberry Pi Pico - SB Components SKU21468

A motor controller in the form of a HAT overlay for the Raspberry Pi Pico . The module is equipped with L293D chip, which allows to control two DC motors or one stepper motor...
Index: SBC-20397
Index: SBC-20397
Shipping in 24 hours
Available
Regular price €10.90 Price €10.90

Wio Terminal - LoRaWAN LoRa-E5, 868MHz GNSS with antenna - Seeedstudio 114992728

Wio Terminal extension module for communication in LoRaWAN LoRa-E5 standard and GNSS at frequency 868 for EU and 915 for US . It is also equipped with SMA antenna .
5.0 (1)
Index: SEE-20122
Index: SEE-20122
Shipping in 24 hours
Available
Regular price €36.90 Price €36.90

Power Monitoring HAT - for Raspberry Pi - SB Components SKU20805

Overlay for Raspberry Pi produced by SB Components. Equipped with 3 measurement channels , it allows you to directly monitor the current , voltage and power consumption...
Index: SBC-20407
Index: SBC-20407
Shipping in 24 hours
Available
Regular price €20.90 Price €20.90

Adafruit Neo Trinkey - SAMD21 USB Key with 4 NeoPixels - Adafruit 4870

The Adafruit Neo Trinkey module is half USB and Adafruit Trinket. The board is equipped with four RGB NeoPixel LEDs . The Adafruit Trinkey is based on the ATSAMD21 chip. Four...
5.0 (1)
Index: ADA-20456
Index: ADA-20456
Shipping in 24 hours
Available
Regular price €9.90 Price €9.90

Seeed Xiao RP2040 - ARM Cortex M0+ - Seeedstudio 102010428

A small board with a very powerful Raspberry Pi RP2040 microcontroller. The Xiao RP2040 module is manufactured by Seeedstudio. The MCU with dual-core ARM Cortex M0+...
5.0 (9)
Index: SEE-19980
Index: SEE-19980
Shipping in 24 hours
Available
Regular price €6.90 Price €6.90

Beetle CM-32U4 - ATmega32U4 - compatible with Arduino Leonardo - DFRobot DFR0816

An improved version of the Beetle module with the popular ATmega32U4 microcontroller, known from the Arduino Leonardo module, with which the Beetle CM-32U4 is compatible....
5.0 (1)
Index: DFR-20433
Index: DFR-20433
Shipping in 24 hours
Available
Regular price €12.90 Price €12.90

RP2040-LCD-0.96 - board with RP2040 microcontroller and IPS LCD display - Waveshare 20330

This board from Waveshare features the Raspberry RP2040 microcontroller, which is also found in the Raspberry Pi Pico. The RP2040-LCD-0.96 has two ARM Cortex-M0+ cores clocked...
5.0 (3)
Index: WSR-20537
Index: WSR-20537
Shipping in 24 hours
Available
Regular price €11.90 Price €11.90

RP2040-Plus - board with RP2040 microcontroller and additional flash memory - Waveshare 20290

A board from Waveshare with the Raspberry RP2040 microcontroller, which also features the Raspberry Pi Pico. The RP2040-Plus has two ARM Cortex-M0+ cores clocked at up to...
5.0 (1)
Index: WSR-20533
Index: WSR-20533
Shipping in 24 hours
Available
Regular price €6.90 Price €6.90

Environmental sensor - hat for Raspberry Pi - Waveshare 20471

An environmental sensor in the form of an overlay for Raspberry Pi equipped with a number of useful sensors. It has built-in temperature , humidity , air pressure, ambient...
5.0 (1)
Index: WSR-20550
Index: WSR-20550
Shipping in 24 hours
Available
Regular price €34.50 Price €34.50

DC Motor Driver Module - four channel - hat for Raspberry Pi Pico - Waveshare 19764

DC motor controller in the form of a HAT overlay for Raspberry Pi Pico . Manufactured by Waveshare, it features the TB6612FNG chip to control up to four DC motors, and the...
Index: WSR-20548
Index: WSR-20548
Shipping in 24 hours
Available
Regular price €19.50 Price €19.50

Feather ESP32-S2 - moduł WiFi, GPIO - compatible with Arduino - Adafruit 5000

A WiFi module based on the ESP32-S2 chip, featuring 4 MB Flash memory and 2 MB PSRAM . The Feather ESP32 is a low-power 2.4 GHz Wi-Fi System-on-Chip (SoC) solution with...
Index: ADA-20784
Index: ADA-20784
Shipping in 24 hours
Available
Regular price €25.50 Price €24.23
  • Reduced price
  • Promotion

Adafruit KB2040 Kee Boar Driver - board with RP2040 microcontroller - Adafruit 5302

Adafruit Kee Boar Driver is a board based on RP2040 microcontroller . The chip has two ARM Cortex M0+ cores running at up to 133 MHz, 264 kB of RAM (no EEPROM) and an 8 MB SPI...
5.0 (1)
Index: ADA-20788
Index: ADA-20788
Shipping in 24 hours
Available
Regular price €12.50 Price €12.50