Magnetic sensors - Strona 2
Magnetic sensor to open door/window - reed contact CMD932P
Wired proximity sensor activated magnetically. The device is used to determine the position of doors and windows. Case dimensions - 9.0 x 32 mm, it has mounting holes.Reed switch normally - plastic 14,5mm
Reed contact in plastic straight housing, 14.5 mm long.Magnetic sensor to open door/window - reed relay HO-03L
Wired proximity sensor activated magnetically. The device is used to determine the position of doors and windows. Case dimensions - 19 x 23 mm.Magnetic sensor - reed contact CMD615
Wireless proximity sensor activated magnetically. Case dimensions 15 x 6.5 mm.Reed switch module - adjustable - Iduino SE015
Simple module with contactor controlled by digital or analog pin. Additionally, on the board there is a potentiometer, thanks to which you can adjust the operating range....Angle holder for an inductive sensor - M30
The angular bracket for inductive proximity sensor. The base dimensions: 48 x 41 mm, dimensions of the bracket - 59 x 41 mm.- On sale!
- Promotion
Module with reed switch - Iduino SE013
Simple module with contactor controlled by digital pin. Powered by 5 V. There is a 10 kΩ resistor on the board.SwitchBot Contact Sensor - door/window and light intensity sensor
The SwitchBot Contact Sensor allows you to record the moment of entry / exit through the door or window, opening and closing them and the level of light intensity in the...- On sale!
- Promotion
Contact reed switch v2 straight 20 mm
Contact reed in the simple case with the length of 20 mm.Contact reed switch straight 38 mm
Contact reed in the simple case with the length of 38 mm.Magnetic sensor - reed contact CMD1423 + screws
Wireless proximity sensor activated magnetically. Case dimensions - 14 x 23 mm.Door / window opening sensor WP8 - 60mm
Limit switch with brazen bushing. Designed for installation as a sensor that detects the opening of doors, windows, hood of a car or trunk. Sensor, by default, is concrete,...Angle holder for an inductive sensor - M8
The angular bracket for inductive proximity sensor. The base dimensions: 28 x 16 mm, dimensions of the bracket - 33 x 16 mm.Angle holder for an inductive sensor - M18
The angular bracket for inductive proximity sensor. The base dimensions: 43 x 26 mm, dimensions of the bracket - 46 x 26 mm.Module with Hall sensor, magnetic field
Module with Hall sensor, analog magnetic switch. It allows for the detection of the magnetic field. The module has no soldered passive elements. It works with voltage of 5 V.Antclabs BLTouch v3.1 - auto bed leveling sensor for 3D printers
BLTouch is a type of semiconductor Hall sensor . It is used in 3D printers as an auto-leveling sensor to accurately measure the inclination of the work table surface. It can be...Magnetic Field Hall sensor - Iduino SE054
Module with Hall sensor, digital magnetic switch. Enables detection of a magnetic field. Operates with a voltage of 5 V.See also
- QR readers
- Piezoelectric sensors
- Optical sensors
- Oxygen sensors
- Resistance sensors
- Door sensors
- Nfc readers
- Inductive sensors
- RPM sensors
- Led motion detectors
- Tilt sensors
- Accelerometers
- Twilight sensors
- Wifi temperature sensors
- Hall effect sensors
- Alarm sensors
- 9DoF IMU sensors
- Pressure sensors
- Air quality sensors
- Sound sensors
- Gesture sensors
- Limit switches
- Sensors of light and color
- Gas sensors
- Medical sensors
- Pressure sensors
- Sensors odbiciowe
- Distance sensors
- Inductive contactless sensors
- Weather sensors
- Liquid level sensors
- Current sensors
- Flow sensors
- Motion sensors
- Temperature sensors
- PT100 temperature probes
- Humidity sensors
- Fingerprint readers
- Encoders
- Photoresistors
- Phototransistors
- IR receivers
- Magnetometers
- Gyros
- Sensor sets
- Grove modules
- Gravity modules