Adafruit QT Py ESP32-C3 WiFi - WiFi module with STEMMA QT/Qwiic connector - Adafruit 5405

Index: ADA-21467
The small QT Py module is equipped with a single-core ESP32-C3 chip clocked at 160 MHz, 4 MB of Flash memory and 400 KB of PSRAM. ESP32-C3 enables wireless communication with WiFi 2.4 GHz and Bluetooth Low Energy (BLE). On the board you can find a native USB type C port, which is also used to power the board and a Qwiic / STEMMA QT connector, two buttons, a temperature sensor, ADC and a NeoPixel RGB LED. The distribution of pins and the dimensions of the module are in accordance with Seeed Xiao.
Adafruit QT Py ESP32-C3 WiFi - WiFi module with STEMMA QT/Qwiic connector - Adafruit 5405
€11.90
€9.67 tax excl.
Waiting time: 4-6 weeks
Temporarily unavailable
PayPal payment
Manufacturer: Adafruit

Product description: Adafruit QT Py ESP32-C3 WiFi - WiFi module with STEMMA QT / Qwiic connector - Adafruit 5405

The small QT Py module is equipped with a single-core ESP32-C3 chip clocked at 160 MHz, 4 MB of Flash memory and 400 KB of PSRAM. ESP32-C3 enables wireless communication with WiFi 2.4 GHz and Bluetooth Low Energy (BLE). On the board you can find a native USB type C port, which is also used to power the board and a Qwiic / STEMMA QT connector, two buttons, a temperature sensor, ADC and a NeoPixel RGB LED . The distribution of pins and the dimensions of the module are in accordance with Seeed Xiao. QT Py from Adafruit offers the user as many as 13 GPIO pins: analog inputs, PWM, I2C, UART, SPI and I2S interface. Board with ESP32-C3 can be programmed in Arduino IDE and CircuitPython.

Pinout description Description of the module pins.

The manufacturer has prepared a detailed user guide , which greatly facilitates the start of working with the module.

Kit contents

  • 1x Adafruit QT Py ESP32-C2 WiFi - WiFi module with STEMMA QT / Qwiic connector - Adafruit 5405
  • 1x goldpin strip 1x16 - 2.54 mm raster

Specification of the Adafruit QT Py ESP32-C3 board

  • System: ESP32-C3
  • Processor: RISC-V Single-Core 160 MHz
  • Flash memory: 4 MB
  • PSRAM memory: 400 kB
  • Native USB port supported by any operating system - can be used with Arduino or CircuitPython as a USB serial console, MIDI, HID keyboard / mouse, or even as a compact drive for storing Python scripts
  • Works with Arduino IDE or CircuitPython
  • Built-in RGB NeoPixel LED with power control to reduce power consumption in deep sleep mode
  • Battery connection pads on the bottom of the board with a protective diode for an external battery pack up to 6V
  • 13 GPIO pins:
    • 11x leads on the pads
    • 5x 12-bit analog inputs on A0 via A3 and SDA
    • UART hardware
    • SPI hardware
    • I2C port on pins shared with STEMMA QT
  • A 3.3 V voltage regulator with an instantaneous output of 600 mA
  • Light Sleep current consumption: 500 mA
  • Deep Sleep power consumption: up to 300 uA
  • Reset button
  • Dimensions: 22 x 17.8 x 5.7 mm
  • Weight: 2.1 g
Zawartość zestawu Adafruit QT Py ESP32-C3 Adafruit QT Py ESP32-C3 kit contents.

UC - Microcontroller ESP32-C3
UC - Flash 4 MB
UC - core 1. Single Core
UC - freq 160 MHz
UC - A/C 12-bit
UC - WiFi yes
UC - USB USB C
UC - Bluetooth yes
UC - I2C yes
UC - UART yes
UC - SPI interface yes
Package width 7.5 cm
Package height 0.2 cm
Package depth 13 cm
Package weight 0.004 kg

Be the first to ask a question about this product!

Product reviews

Adafruit QT Py ESP32-C3 WiFi - WiFi module with STEMMA QT/Qwiic connector - Adafruit 5405

5/5

Average grade

1

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Reviews:

Sebastian 08.09.2023 Confirmed purchase
all good

Customers who bought this product also bought:

Products from the same category: