Product description: SparkFun Thing Plus - NINA-B306 - WiFi, Bluetooth - IMU ISM330DHCX, BME280 - SparkFun WRL-20854
The Thing Plus series module manufactured by SparkFun , equipped with the NINA-B306 chip from u-blox, the 6DoF IMU ISM330DHCX chip from STMicroelectronics and the BME280 atmospheric sensor from Bosch Sensortec. The module enables WiFi communication in the 802.11 b/g/n standard and Bluetooth 5, making it ideal for IoT projects. The Thing Plus board is compatible with the Feather series and is equipped with a Qwiic connector, which means that connection with the rest of this ecosystem does not require soldering. On the module you can also find a Li-Pol battery connector and many GPIO pins.
The manufacturer has also prepared a detailed user's guide , which significantly facilitates starting work with the module.
SparkFun Thing Plus - NINA-B306 - WiFi, Bluetooth - IMU ISM330DHCX, BME280 - SparkFun WRL-20854.
The module is compatible with the Feather family.
Special features of the module
- ARM Cortex-M4 processor and chip enabling WiFi and Bluetooth wireless communication
- 1 MB Flash and 250 kB RAM and integrated PCB antenna
- High-performance 3D digital accelerometer and 3D digital gyroscope, features full-scale, user-selectable acceleration ranges of ±2 / ±4 / ±8 / ±16 g and angular velocity ranges of ±125 / ±250 / ±500 / ±1000 / ±2000 / ±4000 dps .
- Machine Learning Core, programmable FSM, FIFO, sensor hub, event decoding and interrupts
- BME280 sensor measuring barometric pressure, humidity and ambient temperature
- MAX17048 charge level indicator for charging and monitoring the connected battery
- microSD memory card slot
- Built-in compensation for high measurement stability
- Built-in smart FIFO up to 9 kB
- Built-in functions and interrupts: tilt detection, free fall, wake up, 6D/4D orientation, click and double click
- Built-in pedometer and counter
Technical specification of the SparkFun Thing Plus module - NINA-B306
- NINA-B306 chip
- ARM Cortex-M4 processor with 1MB Flash and 250KB RAM
- 2.4 GHz radio modes supported
- Bluetooth Low Energy
- IEEE 802.15.4
- Custom u-blox 2.4GHz modes
- Internal PCB antenna
- Maximum range: 1400 m
- BME280 environmental sensor
- Temperature range:
- Full accuracy: 0°C to 65°C
- Total measuring range: -40°C to 85°C
- Humidity range: 0% to 100% RH
- Pressure range: from 300 hPa to 1100 hPa
- I2C address: 0x76
- Temperature range:
- ISM330DHCX 6DoF IMU
- 3D accelerometer
- Ranges: ±2 / ±4 / ±8 / ±16 g
- 3D gyroscope
- Ranges: ±125 / ±250 / ±500 / ±1000 / ±2000 / ±4000 dps
- Operating temperature range: -40°C to 105°C
- I2C address: 0x6B
- 3D accelerometer
- Feather compatible
- 21 pins GPIO PTH
- SPI, UART and I2C interfaces
- 6x analog leads
- 8x digital inputs/outputs
- USB Type-C connector
- 2-pin JST connector for connecting the Li-Pol battery ( not included )
- Qwiic JST connector
- 21 pins GPIO PTH
There is also a slot for a memory card on the back of the board.
Useful links
|
